Specifications:

  • Brand New Rack & Pinion Bellow
  • Comes as a Pair
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacement
  • Built to strict quality control standards

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:38)
    • Loosen the 22mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Outer Tie Rod (1:49)
    • Loosen the 24mm nut that holds the outer tie rod to the inner tie rod with an adjustable wrench
    • Remove the 22mm nut from the outer tie rod end
    • Strike the steering knuckle with a hammer to loosen the outer tie rod
    • Pull the outer tie rod out of the steering knuckle
    • Twist off the outer tie rod by hand
  3. step : Installing the New Outer Tie Rod (3:49)
    • Twist the new outer tie rod onto the inner tie rod
    • Push the outer tie rod into the steering knuckle
    • Fasten the 22mm castle nut onto the outer tie rod
    • Torque the nut to 45 foot-pounds, then torque to an additional 90 degrees
    • Push the cotter pin through the castle nut
    • Twist the cotter pin into place with needle nose pliers
    • Tighten the 24mm nut that holds the outer tie rod to the inner tie rod with an adjustable wrench
  4. step : Reattaching the Wheel (5:08)
    • Slide the wheel into place
    • Start the 22mm lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to between 135 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 22mm Socket

  • Wrenches - Metric

  • 24mm Wrench

5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
2
0
0
0
0
Works Great
Much better than the universals that I bought at *&%$zone. These are long enough, pliable enough, and look like they will last.
December 20, 2017
Purchased
4 months ago
This product was the perfect fit and cheaper then the local Auto parts store's in town.
February 18, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
Is this for ram 1500, what size is this boot?
marc c on Sep 19, 2017
BEST ANSWER: These are for various Ram 1500 models, but at this time we do not have the specific sizing for the boots. If you confirm the year, make, and model with other cab size specifications on our vehicle fit chart we may guarantee direct fit replacements.

Vehicle Fit

  • 2008-2014 Buick Enclave Steering Rack & Pinion Bellow Pair
  • 2009-2014 Chevy Traverse Steering Rack & Pinion Bellow Pair
  • 2000-2004 Dodge Dakota 4 Wheel Drive Steering Rack & Pinion Bellow Pair
  • 2000-2003 Dodge Durango 4 Wheel Drive Steering Rack & Pinion Bellow Pair
  • 2002-2005 Dodge Ram 1500 Truck Front Steering Rack & Pinion Bellow Pair
  • 2006-2008 Dodge Ram 1500 Truck Quad Cab Front Steering Rack & Pinion Bellow Pair
  • 2006-2008 Dodge Ram 1500 Truck Regular Cab Front Steering Rack & Pinion Bellow Pair
  • 2006-2008 Dodge Ram 1500 Truck 2 Wheel Drive Mega Cab Steering Rack & Pinion Bellow Pair
  • 2003-2010 Dodge Ram 2500 Truck 2 Wheel Drive Steering Rack & Pinion Bellow Pair
  • 2003-2010 Dodge Ram 3500 Truck 2 Wheel Drive Steering Rack & Pinion Bellow Pair
  • 2007-2014 GMC Acadia Steering Rack & Pinion Bellow Pair
  • 2007-2010 Saturn Outlook Steering Rack & Pinion Bellow Pair
Part #: 1ASTB00042

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(06:11 min)