Specifications:

  • Brand New Steering & Suspension Kit
  • Comes as a 13 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components are sealed for long life and do not require the extra maintenance typically required by greasable versions.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Direct Fit

All parts are direct fit, application-specific parts with no modifications required

Rigorously Tested

Rigorously tested and made from higher quality materials than the competition. Our parts are built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

Our parts are manufactured by some of the same factories that the OEMs use.

Prepackaged for Your Convenience

Our kits have been carefully put together to include all of the parts you need to get the job done, saving you both time and money. These kits also help take the guesswork out of finding the correct part for your vehicle’s steering or suspension system, allowing you to get started on your repair project faster.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (1:30)
    • Loosen the lug nuts.
    • Raise and secure the vehicle.
    • Remove the wheel.
  2. step : Remove the tie rod assembly (2:00)
    • Remove the tie rod bolt.
    • Use a pickle fork and hammer to separate it.
    • Use an adjustable wrench and a fitted wrench to remove the tie rod assembly.
  3. step : Install the new tie rod assembly (4:00)
    • Adjust your new tie rod assembly to match the old one for a preliminary alignment.
    • Mount the new tie rod assembly and tighten it in with a wrench.
    • Tighten the nut on the tie rod stud to 65 ft lbs.
    • Install the cotter pin.
    • Use a 7 mm wrench to install the grease fitting
    • With a grease gun, grease the inner and outer joints.
  4. step : Put the wheel back on (7:00)
    • Preliminarily tighten the lug nuts.
    • Lower the car and torque the lug nuts to 120 ft lbs using a star pattern.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Rubber Mallet

  • Pliers, Cutters & misc Wrenches

  • Adjustable Wrench
  • Lug Wrench
  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 35mm Socket
  • 7mm Socket

  • Specialty Tools

  • Grease Gun
  • Tie Rod Fork
  • Tie Rod Puller

3.7 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
1
0
1
0
Chinese imitation parts
I was disappointed with the difference in the parts in this kit and the original parts I removed from my truck. The originals were worn out sure, but they were beefy. The OEM parts were much more robust, thicker metal and heavier than the replacements. I suppose I should have expected it for the price. Next time I will buy the Moog parts rather than these.
September 1, 2017
Fast shipping good quality right fit for the vehicle I am happy whit the service all the way
August 30, 2017
Purchased
8 months ago
Steering kit
Everything included was a great value. All products fit like they were supposed to. The only thing I wish was different is that the parts were greaseable for service life. All in all great product and I will continue ordering parts here.
February 23, 2018
Purchased
5 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2002-2006 Chevy Avalanche 2500 Steering & Suspension Kit 13 Piece Set
  • 2004 Chevy Silverado 1500 Crew Cab 8 Lug Wheels with 3 Groove Pitman Arm Steering & Suspension Kit 13 Piece Set
  • 2001-2004 Chevy Silverado 2500 with 3 Groove Pitman Arm Steering & Suspension Kit 13 Piece Set
  • 2001-2006 Chevy Silverado 2500 HD with 3 Groove Pitman Arm Steering & Suspension Kit 13 Piece Set
  • 2001-2006 Chevy Silverado 3500 Steering & Suspension Kit 13 Piece Set
  • 2001-2006 Chevy Suburban 2500 with 3 Groove Pitman Arm Steering & Suspension Kit 13 Piece Set
  • 2004 GMC Sierra 1500 Crew Cab 8 Lug Wheels with 3 Groove Pitman Arm Steering & Suspension Kit 13 Piece Set
  • 2001-2004 GMC Sierra 2500 with 3 Groove Pitman Arm Steering & Suspension Kit 13 Piece Set
  • 2001-2006 GMC Sierra 2500 HD with 3 Groove Pitman Arm Steering & Suspension Kit 13 Piece Set
  • 2001-2006 GMC Sierra 3500 Steering & Suspension Kit 13 Piece Set
  • 2001-2006 GMC Yukon XL 2500 with 3 Groove Pitman Arm Steering & Suspension Kit 13 Piece Set
  • 2003-2007 Hummer H2 Steering & Suspension Kit 13 Piece Set

This part replaces:

  • Moog ES3609
  • Moog K6535
  • Moog K80631
  • Moog K6693
  • Moog K6723
  • Moog K6654
  • Moog ES3488
  • Moog K6696
  • Hollander 2700-326620
  • OE # 15891516
  • OE # 12479051
  • OE # 15891515
  • OE # 15295861, 26059210
  • OE # 12471378, 19149615
  • OE # 25905442
Part #: 1ASFK03858



How-to Video:

(07:45 min)