Replaces

2014 Chevy Tahoe 8 Piece Set Steering & Suspension Kit for Models with Stamped Steel Lower Control Arms

Frequently bought together

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   8 Piece Set
  • Kit Includes:
      (2) Front Lower Ball Joints
      (2) Front Upper Control Arms with Ball Joints
      (2) Front Outer Tie Rods
      (2) Front Inner Tie Rods

Specifications:

  • Brand New Suspension Kit
  • Comes as an 8 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Should You Purchase This 8-Piece Steering & Suspension Kit?

Does the steering on your vehicle feel loose or sloppy? Are there clunking noises coming from your vehicle's front end? Those are the symptoms of worn steering parts. If you have signs of bad steering parts, you'll want to replace them right away. To find out what parts need to be replaced, you can raise the front end of your car and try moving the parts by hand. You'll want to replace any part that has noticeable play.

It's a good idea to replace steering parts in sets. Since they're all subject to the same elements, you can refresh the whole front end at once. Tracking down each individual part can make it time consuming and costly. Lucky for you, we've collected together control arms, ball joints, and tie rod ends for you into a convenient aftermarket steering and suspension kit. 

Replacing steering parts is relatively a simple process. You may need to support the truck and remove the front wheels to get better access to the suspension. You’ll want to measure the old parts before installing the new ones, so you can set them properly. Then unbolt the parts and bolt on the new ones. You should always get a professional alignment after working on your steering.

These suspension parts are high quality direct fit replacements, guaranteed to fit the listed models. This kit fits a number of GM models from 2007-2014, including the Chevy Silverado and Tahoe, GMC Sierra and Yukon, and Cadillac Escalade. This kit is specifically for models that came with stamped steel lower control arms. For more fit info, check the "Vehicle Fit" tab. 1A Auto's steering and suspension parts use he same high quality materials, precision manufacturing, and rigorous testing as the original equipment.

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Note: When replacing steering components, it is recommended to have a professional alignment performed on the vehicle afterwards. This will ensure proper tracking and even tire wear.

  1. step : Removing the Wheel (1:03)
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Outer Tie Rod (1:24)
    • Turn the brake rotor by hand or turn the steering wheel to turn the rotor
    • Measure the distance from the end of the boot to the center of the tie rod end
    • Note that measurement
    • Loosen the tie rod lock nut with a 15/16" wrench
    • Loosen the 21mm nut from the tie rod
    • Strike the steering knuckle with a hammer to loosen it
    • Lift the tie rod end out of the steering knuckle
    • Twist off the outer tie rod by hand
  3. step : Installing the Outer Tie Rod (2:18)
    • Twist on the outer tie rod
    • Push the tie rod into the steering knuckle
    • Thread the 22mm castle nut onto the tie rod by hand
    • Measure the distance from the end of the boot to the center of the tie rod end
    • This should be the same as the measurement from Step 2
    • Twist the grease fitting into the tie rod
    • Tighten the castle nut to 50-55 foot-pounds of torque
    • Put the cotter pin into the castle nut
    • Twist on the cotter pin with pliers
    • Hold the inner tie rod with a 16mm wrench
    • Tighten the locking nut with a 15/16" wrench
    • Add grease to the tie rod with a grease gun
  4. step : Reattaching the Wheel (4:24)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100-110 foot-pounds in a crossing or star pattern
    • Reattach the center cap

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack
  • Hammer

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 7mm Socket
  • 21mm Socket
  • 22mm Socket

  • Specialty Tools

  • Grease Gun

  • Wrenches - Metric

  • 16mm Wrench

  • Wrenches - SAE

  • 15/16 Inch Wrench

4.50/ 5.0
20 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
16
1
1
1
1
Wrong parts nothing fit
Nothing fit the parts are not for my truck. Idk what else to say I think I pretty much summed it up
February 16, 2017
Great parts great price
Parts were 1/2 the price than my local parts store. Came in within 3 days of ordering. Everything was exactly as I wanted. Great experience all the way around
March 8, 2017
Great Communication
Was able to speak with a rep every time I called and the headed me in a different direction (part number) with a better price
August 14, 2017
Overall good
A little skeptical because it says made in Taiwan but they seem to be good quality. 1a does say they go through the same passing as American made parts so well see how they hold up. The one thing I didnt like is 2 days after purchasing the price dropped $10
August 19, 2017
Great product
Fast and easy shipping parts fit perfectly I will continue to order parts here.
September 14, 2017
my inner tie rod was messed up I need to know how to exchange those for some that are not messed up.
January 29, 2018
Fast an easy
Ordering my parts was real simple..the price on them were great an the delivery was great on updates where my package was an when it was at my door step.The best part i iike was the prices...Thank you...Terri
April 4, 2018
Great parts
Everything came as described and was easy to instal for a fraction of the price. The parts seem to be durable and were exact matches for the factory ball joints. I would recommend
April 6, 2018
Quality products at a great price!
When pricing suspension products, you owe it to yourself to shop around. Big box auto parts stores offer al a cart merchandise with the same warranty as this kit, but at a substantial mark-up. Most of these items were readily available over the counter, but I had time to wait for the mail to deliver these...the package was at my front door in two days! The fit of these components was exact and appear to be of great quality...time will tell, but I am extremely satisfied with 1A Auto on this order.
August 15, 2018
Ball joints and control arms
Easy to order, arrived when promised, exact fit. When I took truck in for Alignment, truck only needed slight adjustment.
September 26, 2018
Worked as expected
I took the kit to a local shop and they installed it pretty quickly took the truck for alignment and now feels much better,everything tight!!
December 23, 2018
Great Value!
This is exactly what you need to restore the handling in your truck! I installed this kit on my 2010 GMC Sierra 1500 and it drives like a new truck. Shipping was right on time and delivered in a satisfactory condition. The parts are solid and install exactly like they should. I will suggest doing research on how to press the lower joints in and out. If done incorrectly it could be a costly mistake. Overall a great product that delivers much more than expected.
January 1, 2019
Great
Parts arrived fast, videos were very helpful. This was the first time I’ve done ball joints and it went well had about eight hrs involved but saved $1400.
February 13, 2019
Gets the job done but poor quality control
Bought the kit for my 2007 GMC sierra 1500 4WD Pros -Much cheaper then buying everything individually - Shipped and arrived quickly - Have the best installation videos on the internet Cons - Poor quality control- Upper control arms, All the grease zerts threads had to be re threaded as threads were filled with metal and was not properly formed in the factory, - Poor Quality control on the Tie rods- again all the Grease Zerts had to be re threaded as again filled with metal that was not properly removed in the factory - Poor Design- lower ball joints- The lower ball joints that came with the kit have a boot that covers the entire face of the ball joint- So when you go to press it in you have to press on the rubber of the boot and will tear the boot- I ended up just buying ball joints from a local store that had a far better design. I would upload a picture but cant on this site. Overall its still a decent kit for the price and time will tell on the longevity of the items but poor quality on the little things just being overlooked.
February 15, 2019
Great all around experiencing with my purchase.
My order was well priced for good solid material and that went in perfectly. My ball joints arrived as advertised in a very timely manner. I will continue to use A1 auti for my parts needs.
March 17, 2019
Great
Great product got here in a great time and was exactly what I ordered
March 22, 2019
Quality parts.
I received my parts quickly. Very well labeled and great quality. Best parts site by far.
March 31, 2019
Awesome Service
Very very satisfied. The product was all there and was received before due date. Will definitely order from them again William White
April 6, 2019
Really was happy on the quality of the part we purchased and also the price. Made it easier for us to get our truck fixed by the quick delivery of our purchase
April 11, 2019
Good customer service
April 19, 2019
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
how makes this kits?
David H November 6, 2016
Im not sure what your asking but I will be glad to answer any questions
Robert C November 6, 2016
Not sure who makes it but I purchased this kit for my 2008 Yukon XL and everything fit perfectly.
FREDERICH L November 6, 2016
We have a few different aftermarket companies build these parts specifically for us, as our 1A Auto house brand. They are manufactured to the same OEM specifications as the original part that came with your vehicle. If you have any further questions, please dont hesitate to ask.
Derek C November 16, 2016
do these parts have grease fittings ?
Kevin M May 11, 2017
These parts should have grease fittings.
Alex P May 11, 2017
Will this kit work for 2013 GMC Sierra SLE 4 wheel drive?
Jordan S July 20, 2017
Yes, as long as your OE lower control arms were made of a stamped steel.
Alex P July 20, 2017
How can you tell of your lower control arms are stamped steel?
Andrew W August 17, 2017
Aluminum are silver/grey steel are black
E A August 17, 2017
Aluminum control arms will be a silver or gray color while the steel arms will be black in color.
Alex P August 17, 2017
Use a magnet. The magnet will stick to steel but not aluminium.
Kevin L August 18, 2017
Are the upper ball joins greaseable?
Martin E M August 31, 2017
Yes. The zerks come with the kit
Adam S September 1, 2017
Yes they are
Cody B September 1, 2017
Yes, grease inserts come with the kit
Robert C September 1, 2017
yes
Kurt S September 1, 2017
Yes
Robert C July 11, 2018
Yes
Scott S February 13, 2019
Would this fit my chevy silverado 2007 4wd 1500 new body style, also my truck has a 3.5 rough country suspension lift?
Kenneth R January 2, 2018
No you have to get different a arm so the front alignment is right this one is for stock trucks
Roger C January 3, 2018
Will this fit my 2009 chevy silverado 1500 4WD?
Mem C December 11, 2018
This part is specific to vehicles with a particular set of options. We will need more information about your vehicle to confirm the fit as these parts are specific to models with OEM Stamped Steel Lower Control Arms.
Jessica D December 12, 2018
What tool do I need to remove the inner tie rod end?
Wayne G May 22, 2019
The only specialty tool you might need to remove the inner tie rod would be this: 1AXAA00062.
Tim K May 22, 2019
Year Make Model Description
2007-2014Cadillac Escalade Cadillac Escalade 8 Piece Set Steering & Suspension Kit for Models with Stamped Steel Lower Control Arms
2007-2014Cadillac Escalade ESV Cadillac Escalade ESV 8 Piece Set Steering & Suspension Kit for Models with Stamped Steel Lower Control Arms
2007-2013Cadillac Escalade EXT Cadillac Escalade EXT 8 Piece Set Steering & Suspension Kit for Models with Stamped Steel Lower Control Arms
2007-2013Chevy Avalanche Chevy Avalanche 8 Piece Set Steering & Suspension Kit for Models with Stamped Steel Lower Control Arms
2007Chevy Silverado 1500 Chevy Silverado 1500 New Body Style 8 Piece Set Steering & Suspension Kit for Models with Stamped Steel Lower Control Arms
2008-2013Chevy Silverado 1500 Chevy Silverado 1500 8 Piece Set Steering & Suspension Kit for Models with Stamped Steel Lower Control Arms
2007-2013Chevy Suburban 1500 Chevy Suburban 1500 8 Piece Set Steering & Suspension Kit for Models with Stamped Steel Lower Control Arms
2007-2014Chevy Tahoe Chevy Tahoe 8 Piece Set Steering & Suspension Kit for Models with Stamped Steel Lower Control Arms
2007GMC Sierra 1500 GMC Sierra 1500 New Body Style 8 Piece Set Steering & Suspension Kit for Models with Stamped Steel Lower Control Arms
2008-2013GMC Sierra 1500 GMC Sierra 1500 8 Piece Set Steering & Suspension Kit for Models with Stamped Steel Lower Control Arms
2007-2014GMC Yukon GMC Yukon 8 Piece Set Steering & Suspension Kit for Models with Stamped Steel Lower Control Arms
2007-2013GMC Yukon XL 1500 GMC Yukon XL 1500 8 Piece Set Steering & Suspension Kit for Models with Stamped Steel Lower Control Arms
Part 1ASFK03588
In Stock


Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Chevy is a registered trademark of General Motors Company. 1A Auto is not affiliated with or sponsored by Chevy or General Motors Company. See all trademarks.