Specifications:

  • Brand New Steering & Suspension Kit
  • Comes as a 12 Piece Kit
    • Fits (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Direct Fit

All parts are direct fit, application-specific parts with no modifications required

Rigorously Tested

Rigorously tested and made from higher quality materials than the competition. Our parts are built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

Our parts are manufactured by some of the same factories that the OEMs use.

Prepackaged for Your Convenience

Our kits have been carefully put together to include all of the parts you need to get the job done, saving you both time and money. These kits also help take the guesswork out of finding the correct part for your vehicle’s steering or suspension system, allowing you to get started on your repair project faster.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (1:30)
    • Loosen the lug nuts.
    • Raise and secure the vehicle.
    • Remove the wheel.
  2. step : Remove the tie rod assembly (2:00)
    • Remove the tie rod bolt.
    • Use a pickle fork and hammer to separate it.
    • Use an adjustable wrench and a fitted wrench to remove the tie rod assembly.
  3. step : Install the new tie rod assembly (4:00)
    • Adjust your new tie rod assembly to match the old one for a preliminary alignment.
    • Mount the new tie rod assembly and tighten it in with a wrench.
    • Tighten the nut on the tie rod stud to 65 ft lbs.
    • Install the cotter pin.
    • Use a 7 mm wrench to install the grease fitting
    • With a grease gun, grease the inner and outer joints.
  4. step : Put the wheel back on (7:00)
    • Preliminarily tighten the lug nuts.
    • Lower the car and torque the lug nuts to 120 ft lbs using a star pattern.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Rubber Mallet

  • Pliers, Cutters & misc Wrenches

  • Adjustable Wrench
  • Lug Wrench
  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 35mm Socket
  • 7mm Socket

  • Specialty Tools

  • Grease Gun
  • Tie Rod Fork
  • Tie Rod Puller

4.8 / 5.0
4 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
3
1
0
0
0
Great deal
This product was delivered very quickly with free shipping everything seemed to be awesome except for one part they sent the three spline and it was actually for spline and I had to buy that part separately which is an extra $70 I would recommend this company to everyone overall it was awesome
February 10, 2017
Purchased
1 year ago
Highly Satisfied
After shopping around at the local big chain auto parts stores I found 1A Auto to have the best prices, best parts and fast service. I will not shop anywhere else. I have told many people about 1A Auto since my order and 3 have also ordered their parts from 1A Auto too. My order was many parts and all were correct and proper fits. Thank you
April 2, 2018
Purchased
2 months ago
I give it a five star rating
The price of the parts were awesome and i stand by quality. I live in northeastern Ohio and plowed over 25 inches of snow in 4 weeks now and my front end is still riding like brand new.
January 18, 2018
Purchased
4 months ago
03 Chevy 2500HD
I was actually impressed with the parts, they all fit perfectly and all were identical match to the original parts. The truck drives like it did in 03 when I bought it new.
I will be using 1A Auto for my next project.
After I completed the project I found the youtube video on the email you sent and watched it then.
March 25, 2018
Purchased
2 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 4 questions Browse 4 questions and 12 answers
REPLACES
2000 Chevy Silverado 2500 12 Piece Set Steering & Suspension Kit With (2) Front Upper Control Arms With Ball Joints (2) Front Lower Ball Joints (2) Front Inner Tie Rods (2) Front Outer Tie Rods (2) Front Sway Bar Links (1) Idler Arm & (1) Pitman Arm For Models With 3 Groove Pitman Arm ball joints pressed in already?
Shane N on Feb 8, 2017
BEST ANSWER: The upper control arms will have the ball joints pre-installed, and the lowers will need to be pressed into your factory control arm.
Is this for a 2500 4x4 chevy?
Del H on Dec 7, 2017
BEST ANSWER: Just make sure you order the right pitmen arm chevy makes two different types. Other than that the parts fit will for my 05' 2500 Chevy duramax
Does this kit come with bushings, or do I need to buy these separate?
James M on Feb 26, 2017
BEST ANSWER: This kit comes with upper control arm bushings only.
Are they as strong as the original parts ?
Rigoms on Feb 4, 2017
BEST ANSWER: Purchased kit and put on my Duramax. Tightened my front end up right up! Very strong! You won't be disappointed with the kit!

Vehicle Fit

  • 2002-2006 Chevy Avalanche 2500 with 3 Groove Pitman Arm Steering & Suspension Kit 12 Piece Set
  • 2001-2003 Chevy Silverado 1500 HD with 3 Groove Pitman Arm Steering & Suspension Kit 12 Piece Set
  • 2005-2006 Chevy Silverado 1500 HD with 3 Groove Pitman Arm Steering & Suspension Kit 12 Piece Set
  • 2007 Chevy Silverado 1500 HD Classic with 3 Groove Pitman Arm Steering & Suspension Kit 12 Piece Set
  • 1999-2004 Chevy Silverado 2500 4 Wheel Drive with 3 Groove Pitman Arm Steering & Suspension Kit 12 Piece Set
  • 2001-2010 Chevy Silverado 2500 HD with 3 Groove Pitman Arm Steering & Suspension Kit 12 Piece Set
  • 2007 Chevy Silverado 2500 HD Classic with 3 Groove Pitman Arm Steering & Suspension Kit 12 Piece Set
  • 2001-2010 Chevy Silverado 3500 with 3 Groove Pitman Arm Steering & Suspension Kit 12 Piece Set
  • 2007 Chevy Silverado 3500 Classic with 3 Groove Pitman Arm Steering & Suspension Kit 12 Piece Set
  • 2001-2010 Chevy Suburban 2500 with 3 Groove Pitman Arm Steering & Suspension Kit 12 Piece Set
  • 2001-2003 GMC Sierra 1500 HD with 3 Groove Pitman Arm Steering & Suspension Kit 12 Piece Set
  • 2005-2006 GMC Sierra 1500 HD with 3 Groove Pitman Arm Steering & Suspension Kit 12 Piece Set
  • 2007 GMC Sierra 1500 HD Classic with 3 Groove Pitman Arm Steering & Suspension Kit 12 Piece Set
  • 1999-2000 GMC Sierra 2500 4 Wheel Drive with 3 Groove Pitman Arm Steering & Suspension Kit 12 Piece Set
  • 2001-2004 GMC Sierra 2500 with 3 Groove Pitman Arm Steering & Suspension Kit 12 Piece Set
  • 2001-2010 GMC Sierra 2500 HD with 3 Groove Pitman Arm Steering & Suspension Kit 12 Piece Set
  • 2007 GMC Sierra 2500 HD Classic with 3 Groove Pitman Arm Steering & Suspension Kit 12 Piece Set
  • 2001-2010 GMC Sierra 3500 with 3 Groove Pitman Arm Steering & Suspension Kit 12 Piece Set
  • 2007 GMC Sierra 3500 Classic with 3 Groove Pitman Arm Steering & Suspension Kit 12 Piece Set
  • 2001-2010 GMC Yukon XL 2500 with 3 Groove Pitman Arm Steering & Suspension Kit 12 Piece Set
  • 2003-2009 Hummer H2 with 3 Groove Pitman Arm Steering & Suspension Kit 12 Piece Set

This part replaces:

  • Dorman 520-150
  • Hollander 511-01044, 511-01045
  • Moog ES3609
  • Moog K620053
  • OE # 15891516
  • OE # 12479051
  • OE # 15891515
  • OE # 15295861, 26059210
  • OE # 15224737, 15864153
  • Moog K6535
  • Moog K80631
  • Moog K6693
  • Moog K6654
  • Moog ES3488
Part #: 1ASFK03353


How-to Video:

(07:45 min)