Specifications:

  • Brand New Steering & Suspension Kit
  • Comes as a Set of 12
  • Direct replacements
  • Built to strict quality control standards

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (0:51)
    • Pry off the hub cap.
    • Use your 34 mm socket and breaker bar to loosen the hub nut.
    • Loosen your lug nuts with a 19 mm socket and breaker bar.
    • Raise and secure your vehicle.
    • Remove the lug nuts and set the wheel aside.
  2. step : Remove the brakes (1:31)
    • Use your 15 mm socket to remove the bolts in the caliper bracket.
    • Use a screwdriver to compress the caliper piston.
    • Remove the caliper and tuck it up and out of the way.
    • Pry out the brake pads.
    • Remove two more 15 mm bolts to remove the caliper bracket.
    • Remove the rotor.
  3. step : Remove the Hub (4:11)
    • Hit the hub nut with penetrating oil, and remove it with your 34 mm socket.
    • Give your axle a solid tap with a hammer.
    • Remove the three bolts holding the hub to the steering knuckle.
    • Unplug the ABS sensor.
    • Remove the hub.
  4. step : Install the new hub. (6:58)
    • Plug in the ABS sensor lead.
    • Work the hub onto the axle and start your bolts.
    • Evenly tighten up the bolts, rotating through the three till they are tight enough to torque.
    • Torque the bolts to 60 ft lbs.
    • Put the hub nut on and tighten it preliminarily.
  5. step : Install the brakes (9:46)
    • Inspect your rotors and replace with new ones cleaned with brake parts cleaner if needed.
    • Use a wire brush to clean corrosion from the brake caliper bracket.
    • Bolt the bracket down with a ratchet and 15 mm socket and torque to 80 ft lbs.
    • Apply anti-seize grease to the edges of the brake pads and insert them into the caliper brackets.
    • Compress the calipers with a C-Clamp and mount it.
    • Feed the caliper bolts into place after inspecting and cleaning the bolt sleeves and torque them to 50 ft lbs.
  6. step : Put the wheel back on (13:50)
    • Hand tighten the lug nuts and lower the vehicle.
    • Torque the hub nut to 118 foot pounds.
    • Use a star pattern to torque the lug nuts to 100 ft lbs.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands

  • Ratchets & Related

  • Torque Wrench
  • 1/2 Inch Breaker Bar
  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 34mm Socket
  • 19mm Socket
  • 15mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(14:41 min)

Tools List:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands

  • Ratchets & Related

  • Torque Wrench
  • 1/2 Inch Breaker Bar
  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 34mm Socket
  • 19mm Socket
  • 15mm Socket



This part replaces:

  • Hollander 512-01242R
  • Hollander 512-01243L
  • Hollander 538-01680B
  • OE # 15221006
  • OE # 21011025
  • OE # 21011026
  • OE # 25766510
  • OE # 25766511
  • OE # 26034348
  • OE # 7470017
  • OE # 7470105
  • OE # 7470143
  • Dorman 520-169
  • Dorman 520-170
  • Moog K6472
  • OE # 12429204
  • Moog ES3452
  • Moog K620291
  • Moog K620292
  • Moog K5255
  • Dorman 951-016
  • Reference Number 513121
  • Moog EV260

Vehicle Fit

  • 2000-2004 Buick LeSabre 12 Piece Set Steering & Suspension Kit for Models with ABS Brakes
  • 1998-2005 Buick Park Avenue 12 Piece Set Steering & Suspension Kit for Models with ABS Brakes
  • 1998-1999 Buick Riviera 12 Piece Set Steering & Suspension Kit for Models with ABS Brakes
  • 2000-2005 Pontiac Bonneville 12 Piece Set Steering & Suspension Kit with ABS Brakes V6 3.8L excluding Supercharged Models
  • 2000-2005 Pontiac Bonneville 12 Piece Set Steering & Suspension Kit V8 4.6L with ABS Brakes
Part #: 1ASFK02969

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More