Specifications:

  • Brand New Steering & Suspension Kit
  • Comes as a 10 Piece Kit
    • Fits  LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components are sealed for long life and do not require the extra maintenance typically required by greasable versions.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Direct Fit

All parts are direct fit, application-specific parts with no modifications required

Rigorously Tested

Rigorously tested and made from higher quality materials than the competition. Our parts are built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

Our parts are manufactured by some of the same factories that the OEMs use.

Prepackaged for Your Convenience

Our kits have been carefully put together to include all of the parts you need to get the job done, saving you both time and money. These kits also help take the guesswork out of finding the correct part for your vehicle’s steering or suspension system, allowing you to get started on your repair project faster.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Stabilizer Links (1:37)
    • Turn the wheels for access to the stabilizer link.
    • Spray the stabilizer with penetrating oil.
    • 9/16â€� socket on the bottom and a 15mm socket on the top. Loosen the stabilizer link.
    • Use a hammer and punch to push the link out.
    • Use vice grips if needed.
  2. step : Replacing the Stabilizer Link (3:08)
    • Push the link up into place.
    • Put the link together in this order:
    • Bushing on the bottom of the control arm.
    • Bushing above the control arm.
    • Washer
    • Shaft
    • Washer
    • Bushing
    • Bushing
    • Washer
    • Nut.
    • Tighten the stabilizer to 15-17ft/lbs.

Tools needed for replacement:

    General Tools

  • Center Punch
  • Hammer

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 14mm Socket

  • Sockets - SAE

  • 9/16 Inch Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
Everything fit like Factory and feels like brand new again
August 19, 2017
Purchased
8 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1997-2002 Ford Expedition 4 Wheel Drive 10 Piece Set Steering & Suspension Kit without Air Suspension
  • 2004 Ford F150 Heritage Truck 4 Wheel Drive 10 Piece Set Steering & Suspension Kit
  • 1997-2003 Ford F150 Truck 4 Wheel Drive 10 Piece Set Steering & Suspension Kit
  • 1997-1999 Ford F250 Light Duty Truck 4 Wheel Drive 10 Piece Set Steering & Suspension Kit
  • 1998-2002 Lincoln Navigator 4 Wheel Drive 10 Piece Set Steering & Suspension Kit

This part replaces:

  • Moog K8694T, K80771
  • Moog ES3366T
  • Moog ES3367T
  • Moog ES3369T
  • Moog ES3370T
  • Moog K8722T
  • Moog K8724T
  • Moog K8772
  • Dorman 520-215
  • Dorman 520-216
  • Hollander 511-01023BL
  • Hollander 511-01023BR
  • OE # 5L3Z3085C, XL3Z3085BA
  • OE # 5L3Z3084C, XL3Z3084BA
Part #: 1ASFK02892



How-to Video:

(05:08 min)