Specifications:

  • Comes as a SET of 8
    • Fits the LH (Driver Side) and RH (Passenger Side) FRONT
  • Direct replacement
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Part Details

  • Kit Includes: (2) Front Outer Tie Rods
  • Kit Includes: (2) Front Lower Control Arms with Ball Joints
  • Kit Includes: (2) Front Sway Bar Links
  • Kit Includes: (2) Front Inner Tie Rods
  • Quantity: 8 Piece Set

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

  1. step : Raise and secure the vehicle (1:23)
    • Lift and secure your vehicle with its model specific safe support points.
    • Make sure your jack stands are set and the correct height on an even surface and your e brake is on if all four wheels aren’t off the ground.
  2. step : Remove the stabilizer link (2:45)
    • Use a wrench to secure the top of the link and a socket and breaker bar on the bottom.
    • Remove the stabilizer link.
  3. step : install the new stabilizer link (3:16)
    • Thread the stabilizer link, bushings and washers into the control arm and sway bar.
    • Use your wrench to secure the link and a socket and ratchet to tighten it up.
    • The torque spec is 13 foot lbs.

Tools needed for replacement:

    Ratchets & Related

  • Torque Wrench

  • Sockets - Metric

  • Complete Metric Socket Set

  • Wrenches - Metric

  • Complete Metric Wrench Set

4.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
0
1
0
0
0
2004 Pontiac Grand Am
I was very pleased with my order from 1A AUTO.my complete order was delivered TWO days ahead of the scheduled date PLUS 1A AUTO paid all shipping and handling charged. Thank you 1A AUTO
June 29, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2004-2005 Chevy Classic 8 Piece Set Steering & Suspension Kit
  • 1997-2003 Chevy Malibu 8 Piece Set Steering & Suspension Kit
  • 2000-2004 Olds Alero 8 Piece Set Steering & Suspension Kit
  • 1997 Olds Cutlass 8 Piece Set Steering & Suspension Kit (excluding Supreme Models)
  • 1998-1999 Olds Cutlass 8 Piece Set Steering & Suspension Kit
  • 2000-2005 Pontiac Grand Am 8 Piece Set Steering & Suspension Kit

This part replaces:

  • Dorman 520-133
  • Dorman 520-134
  • OE # 26073562
  • OE # 22609743, 15216919
  • OE # 15216918
  • Moog EV408
  • Moog K80446
  • Moog K80428
  • Moog K6600
  • Moog ES3455
  • Hollander 512-01239L
  • Hollander 512-01238R
Part #: 1ASFK02181

How-to Video:

(06:25 min)