• Brand New Starter
  • No core charge
  • Direct replacement
  • Built to strict quality control standards

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Disconnecting the Battery (0:20)
    • Loosen the negative battery terminal with a 10mm wrench
    • Remove the negative battery terminal from the negative battery post
  2. step : Removing the Air Intake (0:23)
    • Remove the two 10mm bolts from the air intake
    • Lift the intake duct up and out
  3. step : Removing the Starter (Removing the Starter)
    • Disconnect the starter electrical connector
    • Remove the 12mm nut from the starter power cable
    • Disconnect the power cable from the starter
    • Loosen the 14mm bolt at the rear of the starter
    • Loosen the 14mm bolt at the front of the starter
    • Remove the two 14mm bolts
    • Pull the starter off of the transmission and out of the engine bay
  4. step : Installing the Starter (3:08)
    • Line up the starter on the transmission
    • Start the 14mm bolt at the front of the starter by hand
    • Start the 14mm bolt at the rear of the starter with a socket and extension
    • Torque the two 14mm bolts to 28 foot-pounds
    • Remove the 12mm nut from the starter stud by hand
    • Connect the power cable to the starter
    • Fasten the power cable nut to the starter stud with a 12mm socket and ratchet
    • Push the rubber cap onto the power cable
    • Connect the starter electrical connector
  5. step : Installing the Air Intake (5:20)
    • Connect the intake duct to the air box
    • Fasten the two 10mm bolts that hold the air duct to the radiator support
  6. step : Connecting the Battery (5:53)
    • Connect the negative battery terminal to the negative battery post
    • Tighten the 10mm nut on the battery terminal

Tools needed for replacement:

    Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet

  • Sockets - Metric

  • 12mm Socket
  • 14mm Socket
  • 10mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
very nice!!! and it works nice and smooth!!! thank you
March 1, 2017
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2002-2003 Lexus ES300 Starter V6 3.0L
  • 2004-2006 Lexus ES330 Starter V6 3.3L
  • 2007-2013 Lexus ES350 Starter V6 3.5L
  • 2004-2006 Lexus RX330 Starter V6 3.3L
  • 2007-2009 Lexus RX350 Starter V6 3.5L
  • 2005-2010 Scion tC Starter L4 2.4L
  • 2008-2013 Scion xB Starter L4 2.4L
  • 2005-2013 Toyota Avalon Starter V6 3.5L
  • 2002-2006 Toyota Camry Starter V6 3.0L
  • 2002-2009 Toyota Camry Starter L4 2.4L
  • 2004-2006 Toyota Camry Starter V6 3.3L
  • 2007-2009 Toyota Camry Starter V6 3.5L
  • 2012-2013 Toyota Camry Starter L4 2.5L
  • 2012-2013 Toyota Camry Starter V6 3.5L
  • 2004-2007 Toyota Highlander Starter V6 3.3L
  • 2004-2007 Toyota Highlander Starter L4 2.4L
  • 2008-2009 Toyota Highlander Starter V6 3.5L
  • 2006-2008 Toyota Rav4 Starter L4 2.4L
  • 2006-2008 Toyota Rav4 Starter V6 3.5L
  • 2004-2006 Toyota Sienna Starter V6 3.3L
  • 2007-2010 Toyota Sienna Starter V6 3.5L
  • 2012-2013 Toyota Sienna Starter V6 3.5L
  • 2012 Toyota Sienna Starter L4 2.7L
  • 2002-2008 Toyota Solara Starter L4 2.4L
  • 2002-2003 Toyota Solara Starter V6 3.0L
  • 2004-2008 Toyota Solara Starter V6 3.3L
  • 2009-2013 Toyota Venza Starter L4 2.7L
  • 2009-2013 Toyota Venza Starter V6 3.5L

This part replaces:

  • OE # 281000A010
  • OE # 2810028041
  • OE # 2810028040
  • OE # 2810020021
  • OE # 2810020020
  • Lester 7825
  • TYC 1-17825
Part #: 1AEST00376

Out of Stock

How-to Video:

(06:08 min)