In the past, replacing struts required specialized tools to compress, remove and transfer the old spring and mount.  Pre-assembled with all new parts, our complete strut and spring assemblies make this job much quicker and easier for the do-it-yourself mechanic.

Each complete strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut 
Direct Fit

Fits and functions correctly.  Competitors combine applications to reduce the amount of parts they carry, resulting in: incorrect vehicle height, poor response and an uncomfortable ride.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.


Loaded strut & spring assemblies allow for a quicker, safer install than bare struts.  No spring compressor required! 

Trouble-Free Install

Includes the matched parts needed. New components over reused parts provide a better ride and save you from having to repair again.

Matched Parts

Not all shocks and struts are manufactured the same.  Mixing and matching can result in ride quality issues and decrease the life of the parts.

Saves Time & Money

Over buying the parts individually, or having to search different parts that are correct for your vehicle (because we did it for you!)

Part Details

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:56)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Strut Assembly (1:23)
    • Remove the ball joint nut with a 19mm socket and ratchet
    • Remove the 19mm nuts securing the sway bar link with a breaker bar and pair of vise grips
    • Loosen and remove the bottom strut bolt with a 21mm wrench and 18mm socket and ratchet
    • Remove the three 13mm nuts on the top of the strut, holding the strut when removing the last bolt
    • Remove the strut
  3. step : Installing the Strut Assembly (5:31)
    • Insert the strut into place, lining up the top first
    • Start a 13mm nut by hand
    • Reinstall the upper ball joint and its 19mm nut
    • Torque the bolt to 35 foot-pounds and add 90 degrees
    • Tighten the 13mm nuts on top of the strut
    • Torque the 13mm nuts to 20 foot-pounds
    • Install the bottom 19mm bolt
    • Torque the 19mm bolt to 128 foot-pounds
    • Insert the upper portion of the sway bar link
    • Tighten the 22mm nut to the sway bar link with vise grip pliers
    • Torque the 22mm nut to 95 foot-pounds
  4. step : Reattaching the Wheel (8:16)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 110 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Gloves
  • Rust Penetrant
  • Bungee Cord

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • Complete Metric Socket Set

3.9 / 5.0
9 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Not only did my shocks Faster than I expected, but I set aside a full day for the installation. It took, with lunch brake, 1 hour and 10 minutes to get them in. Great purchase! Price and all !!
May 29, 2018
3 months ago
They were good.... for about a month and a half...
I bought them because the firestone I went to wouldn’t do the alignment until I fixed the shocks and struts and a whole bunch of other stuff. I bought them about a month and a half ago and they were doing very good actually. Until about a week ago the rear shocks started making some noises so I took it in. The mechanic said that both had been torn on the top and need replacement. I will be contacting 1A auto and seeing if I can still replace them for new ones and give them a shot
May 9, 2018
5 months ago
I will definitely recommend 1aauto to everyone because they have the best prices and the best quality of parts
April 5, 2018
5 months ago
The shocks , struts and brakes i bought from u works perfect tk u very much
March 16, 2018
5 months ago
Great product
Went in easy no issues so far must say thank you Hopefully see or visit soon love it
January 12, 2018
7 months ago
its ok
jest put the shocks on my 2005 300 in it is to bounce in the back.
December 14, 2017
10 months ago
The best company to do business with. Very friendly and professional service
October 21, 2017
10 months ago
I still have problems with the rear shocks,1A auto replace the second time,but the noise still,I am not sure if they send me the right part,I give up,I thinking to buy the original parts.Yes I replace the rearmount too.
April 23, 2017
1 year ago
Quick and easy
The strut assemblies make it easy to change struts. I only wish the shocks included shock mounts because I had to run to the local parts store to get them. Overall I am extremely satisfied with my purchase.
March 25, 2017
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 3 questions Browse 3 questions and 5 answers
Is there any other hardware I would need?
TimelessLogic T on May 23, 2018
BEST ANSWER: Possibly a link kit. They may not want to come off easy or be worn.
Would this fit on a 2008 Chrysler 300c rwd?
Joshua W on Feb 17, 2018
BEST ANSWER: These will fit the following models: 2005-2010 Chrysler 300 RWD (excluding SRT-8) for Models without Nivomat Suspension
What brand are the parts?
Clayton V on Mar 9, 2017
BEST ANSWER: We have a few different aftermarket companies build these parts specifically for us, as our 1A Auto house brand. They are manufactured to the same OEM specifications as the original part that came with your vehicle. If you have any further questions, please don't hesitate to ask.

Vehicle Fit

Year Make Model Description
2005-2010Chrysler 300 Chrysler 300 Front & Rear Shock & Strut Kit Rear Wheel Drive (excluding SRT-8) for Models without Nivomat Suspension TRQ SKA60966
2006-2010Dodge Charger Dodge Charger Front & Rear Shock & Strut Kit Rear Wheel Drive without Sport Suspension (excluding Police Package) for Models without Nivomat Suspension TRQ SKA60966
2005-2008Dodge Magnum Dodge Magnum Front & Rear Shock & Strut Kit Rear Wheel Drive without Sport Suspension (excluding Police Package) for Models without Nivomat Suspension TRQ SKA60966

This part replaces:

  • Monroe 172248
  • Monroe 5797
  • KYB 349065
  • TRQ SKA60966
Part #: 1ASSP01001

Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Brand #: SKA60966

How-to Video:

(08:42 min)