Replaces

Shock & Spring Assembly Front Pair Monroe Quick-Strut 139105 - MNSSP00110

Why Buy Monroe Quick-Strut Assemblies?

Monroe Quick-Strut assemblies are high quality and easy-to-install. Some of its benefits include:

  • Application specific technology
  • Restores factory ride height and feel
  • Quicker installation time than bare strut assemblies
  • Pre-assembled and no compression tool required
    • Includes new mount, bearing, coil spring, isolators, boot, and strut
  • Nitrogen gas charged

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:59)
    • Remove the wire clip from the top of the strut
    • Remove the three 18mm nuts from the top of the strut
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Stabilizer Link (2:02)
    • Turn the wheel by hand
    • Spray the top of the stabilizer link with rust penetrant
    • Hold the stabilizer link stud with a 15mm wrench
    • Remove the lower nut from the stabilizer link with a 15mm wrench
    • Pull off the stabilizer link
  3. step : Removing the Shock Strut (2:38)
    • Remove a 15mm socket from the lower shock strut bolts
    • Press down on the strut
    • Remove the strut
    • Push off the two clips with a flat blade screwdriver from the old strut
  4. step : Installing the New Strut (3:38)
    • Insert the 18mm nuts to the top of the strut by hand
    • Thread the 15mm bolts to the lower part of the strut
    • Replace the old two clips to the new strut
    • Tighten the 15mm bolts to the lower part of the strut
    • Torque the 15mm bolts between 70 and 75 foot-pounds
  5. step : Reinstalling the Stabilizer Link (4:58)
    • Push the stabilizer link into place
    • Start the 15mm nuts by hand
    • Hold the upper stabilizer link stud with a 15mm wrench
    • Fasten the lower nut onto the stabilizer link with a 15mm wrench
  6. step : Reattaching the Wheel (5:13)
    • Slide the wheel into place
    • Start the 22mm lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap
    • Tighten the 18mm nuts to the top of the strut
    • Torque the 18mm nuts between 75 and 85 foot-pounds
    • Reinsert the wire clip

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • A Piece of Pipe (for leverage)
  • Socket Extensions

  • Sockets - Metric

  • 18mm Socket
  • 15mm Socket
  • 22mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
Great!
Great struts ride really nice they work with a 6 to a 8" lift kit and still ride really nice will but another set down the road!
May 23, 2017
Purchased
10 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 4 answers
I'm switching From air strut to standard strut. Will this strut still fit my 2010 Cadillac Escalade esv ?
Marc S on Jun 5, 2017
BEST ANSWER: If your truck does not have electronic suspension, this kit will fit your vehicle. Thank you for asking. Have a great day!

How-to Video:

(06:04 min)

Tools List:

    General Tools

  • Floor Jack
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • A Piece of Pipe (for leverage)
  • Socket Extensions

  • Sockets - Metric

  • 18mm Socket
  • 15mm Socket
  • 22mm Socket



This part replaces:

  • Monroe Quick-Strut 139105

Vehicle Fit

  • 2007-2013 Cadillac Escalade Front Shock & Spring Assembly Pair without Electronic Suspension Monroe Quick-Strut 139105
  • 2007-2013 Cadillac Escalade ESV Front Shock & Spring Assembly Pair without Electronic Suspension Monroe Quick-Strut 139105
  • 2007-2013 Cadillac Escalade EXT Front Shock & Spring Assembly Pair without Electronic Suspension Monroe Quick-Strut 139105
  • 2007-2013 Chevy Avalanche 1500 Front Shock & Spring Assembly Pair without Electronic Suspension Monroe Quick-Strut 139105
  • 2007 Chevy Silverado 1500 New Body Style Front Shock & Spring Assembly Pair without Electronic Suspension Monroe Quick-Strut 139105
  • 2008-2013 Chevy Silverado 1500 Front Shock & Spring Assembly Pair without Electronic Suspension Monroe Quick-Strut 139105
  • 2007-2013 Chevy Suburban 1500 Front Shock & Spring Assembly Pair without Electronic Suspension Monroe Quick-Strut 139105
  • 2007-2013 Chevy Tahoe Front Shock & Spring Assembly Pair without Electronic Suspension Monroe Quick-Strut 139105
  • 2007 GMC Sierra 1500 New Body Style Front Shock & Spring Assembly Pair without Electronic Suspension Monroe Quick-Strut 139105
  • 2008-2013 GMC Sierra 1500 Front Shock & Spring Assembly Pair without Electronic Suspension Monroe Quick-Strut 139105
  • 2007-2009 GMC Yukon Front Shock & Spring Assembly Pair without Electronic Suspension Monroe Quick-Strut 139105
  • 2007-2009 GMC Yukon XL 1500 Front Shock & Spring Assembly Pair without Electronic Suspension Monroe Quick-Strut 139105
Part #: MNSSP00110

Ships Same Day for orders placed by 4 P.M. ET

Monroe Quick-Strut
Brand #: 139105

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More