Direct Fit

Direct fit replacement; not only will the part fit correctly, but it will function correctly.  Many competitors combine applications to cut down on the amount of parts they have to carry. This can result in the following issues: incorrect vehicle height, poor response and an uncomfortable ride.

Rigorously Tested

Rigorously tested and made from higher quality materials than the competition. Our parts are built to have a longer life in any environment or road conditions.

Matched Parts

When you buy the kit pre-built by us, you can be sure that the parts are matched for optimum performance.  Not all shocks and struts are manufactured the same, so mixing and matching can result in fit issues and potentially decrease the life of the parts.

Saves Time & Money

When you buy one of our kits, you not only save money over buying the parts individually, but you also save time having to search for all of the different parts that are correct for your vehicle (because we did it for you!)

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Remove the shocks (1:00)
    • Use your 15 mm wrench and a 13mm socket and ratchet to remove the bolts.
    • Use penetrating oil and an adjustable wrench and vice grips to help remove the nuts and bolts.
  2. step : Install the new shocks (4:00)
    • Assemble the washers and grommets onto the shocks and put them into place, putting the rest of the washers and grommets into place.
    • Bolt into place nice and tight.
    • Use a jack to lift the control arm to bolt the shock on the rest of the way.

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Adjustable Wrench

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet

  • Sockets - Metric

  • 13mm Socket
  • 15mm Socket

  • Specialty Tools

  • Vise-Grips

4.5 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
1
0
0
0
Got all shocks in a timely manner all good thanks. Curt
September 20, 2017
Purchased
7 months ago
were easy to put in but video didn't have the correct nut and bolt sizes
August 22, 2017
Purchased
8 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1998-2011 Ford Ranger 4 Wheel Drive Front & Rear Shock Absorber 4 Piece Set for Models with Front Torsion Bar Suspension
  • 1998-2007 Mazda B3000 Truck Front & Rear Shock Absorber 4 Piece Set for Models with Front Torsion Bar Suspension
  • 1998-2009 Mazda B4000 Truck Front & Rear Shock Absorber 4 Piece Set for Models with Front Torsion Bar Suspension

This part replaces:

  • Reference Number D54309
  • OE # 5U2Z18V124MA
  • Monroe 32296
  • Monroe 37014
  • KYB 341302
  • KYB 344079
Part #: 1ASSP01186

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(07:08 min)