Our direct fit gas-charged shock absorbers help to restore your vehicle’s handling and ride quality to just like new.

Direct Fit

Direct fit replacement; not only will the part fit correctly, but it will function correctly.  Many competitors combine applications to cut down on the amount of parts they have to carry. This can result in the following issues: incorrect vehicle height, poor response and an uncomfortable ride.

Rigorously Tested

Rigorously tested and made from higher quality materials than the competition. Our parts are built to have a longer life in any environment or road conditions.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Shock (0:49)
    • If you are raising the vehicle, support it by the frame
    • Loosen the lower 18mm nut and bolt from the shock
    • Loosen the upper 18mm bolt from the shock
    • If you have raised the vehicle, support the axle with a jack
    • Pull the bolts out of the shock
    • Pull the shock down and out
  2. step : Installing the New Shock (2:15)
    • Put the new shock into place
    • Thread the top 18mm bolt into the shock by hand
    • Push the shock up into place
    • Thread the lower 18mm bolt into the shock
    • Tighten the top 18mm bolt preliminarily
    • Fasten the 18mm nut onto the lower 18mm bolt
    • Tighten the lower 18mm nut and bolt preliminarily
    • If you raised the vehicle, lower it to the ground
    • Start the vehicle
    • Allow the air suspension to inflate
    • Check the ride height
    • Tighten the two 18mm bolts

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Sockets - Metric

  • 18mm Socket

  • Wrenches - Metric

  • 18mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2004-2007 Buick Rainier Rear Shock Absorber Driver or Passenger Side
  • 2003-2006 Chevy SSR Rear Shock Absorber Driver or Passenger Side
  • 2002-2009 Chevy Trailblazer Rear Shock Absorber Driver or Passenger Side
  • 2002-2006 Chevy Trailblazer EXT Rear Shock Absorber Driver or Passenger Side
  • 2002-2009 GMC Envoy Rear Shock Absorber Driver or Passenger Side
  • 2002-2006 GMC Envoy XL Rear Shock Absorber Driver or Passenger Side
  • 2004-2005 GMC Envoy XUV Rear Shock Absorber Driver or Passenger Side
  • 2003-2008 Isuzu Ascender Rear Shock Absorber Driver or Passenger Side
  • 2002-2004 Olds Bravada Rear Shock Absorber Driver or Passenger Side
  • 2005-2008 Saab 9-7X Rear Shock Absorber Driver or Passenger Side

This part replaces:

  • OE # 25820699
  • Monroe 37241
  • KYB 343395
Part #: 1ASHA00052

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(03:45 min)