Our direct fit gas-charged shock absorbers help to restore your vehicle’s handling and ride quality to just like new.

Direct Fit

Direct fit replacement; not only will the part fit correctly, but it will function correctly.  Many competitors combine applications to cut down on the amount of parts they have to carry. This can result in the following issues: incorrect vehicle height, poor response and an uncomfortable ride.

Rigorously Tested

Rigorously tested and made from higher quality materials than the competition. Our parts are built to have a longer life in any environment or road conditions.

Matched Parts

When you buy the kit pre-built by us, you can be sure that the parts are matched for optimum performance.  Not all shocks and struts are manufactured the same, so mixing and matching can result in fit issues and potentially decrease the life of the parts.

Saves Time & Money

When you buy one of our kits, you not only save money over buying the parts individually, but you also save time having to search for all of the different parts that are correct for your vehicle (because we did it for you!)

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:45)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Wheel Well Liner (1:17)
    • Remove all of the fasteners out of the wheel well liner
    • Pry the fasteners out with a flat blade screwdriver
    • Remove the 10mm nut in the top of the wheel well
    • Remove the wheel well liner
  3. step : Removing the Shock Absorbers (2:14)
    • Remove the 18mm bolt at the top of the shock
    • Remove the 18mm bolt and nut at the bottom of the shock
  4. step : Installing the Shock Absorbers (3:51)
    • Insert the shock into place
    • Tighten the 18mm bolt at the bottom of the shock
    • Tighten the 18mm bolt at the top of the shock
    • Torque the top and bottom bolts to 81 foot-pounds
  5. step : Installing the Wheel Well Liner (5:04)
    • Insert the wheel well liner into place
    • Tighten the 10mm nut to the top of the wheel well
    • Press the fasteners into the liner
  6. step : Reattaching the Wheel (5:50)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Gloves
  • Dust Mask

  • Ratchets & Related

  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Specialty Tools

  • Trim Tool Set

  • Wrenches - Metric

  • Complete Metric Wrench Set

4.5 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
1
0
0
0
Happy customer
Super happy with the device you supply. The parts came early and fit just right. I am definitely a return shopper. Thank you for beating the other guys prices as well.
April 19, 2018
Purchased
3 weeks ago
one good purchase
yes i would recommend fair quality gets the job done i would say, just make sure their installed properly. much better comfort and control theirs nothing bad about this purchase thank you 1 A auto...
March 9, 2018
Purchased
1 month ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
What is the brand?
justin d on Dec 26, 2017
BEST ANSWER: We have a few different aftermarket companies in either China or Taiwan build these parts specifically for us, as our 1A Auto house brand. They are manufactured to the same OEM specifications as the original part that came with your vehicle. If you have any further questions, please don't hesitate to ask.

Vehicle Fit

  • 2012-2013 Chevy Captiva Sport Rear Shock Absorber Pair
  • 2005-2016 Chevy Equinox Rear Shock Absorber Pair
  • 2010-2016 GMC Terrain Rear Shock Absorber Pair
  • 2006-2009 Pontiac Torrent Rear Shock Absorber Pair
  • 2008-2010 Saturn Vue Rear Shock Absorber Pair
  • 2007-2009 Suzuki XL-7 Rear Shock Absorber Pair

This part replaces:

  • Monroe 911258
  • KYB 345055
Part #: 1ASSP00568



How-to Video:

(06:19 min)