The Monro-Matic Plus® shock absorbers are nitrogen gas charged and feature velocity sensitive valving and all weather fluid, which offers trucks improved comfort at an economical price.

The result: enhanced control with uncompromised ride comfort.

  • All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction.
  • Full Displaced Valving: Tuned specifically for each application, this valving automatically adjusts to road extremes to provide consistency and ride comfort.
  • Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
  • Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration.
  • 2" Reserve Tube: More fluid for more consistent performance.
  • 1-3/8" Bore: Lower operating pressure than standard 1" bore units.
  • 5/8" Piston Rod: Heavy-duty nitrocarburized rod* for long service life.
  • Special Seal: "Self-lubricating" fluid seal designed to retain gas without excessive wear or friction.

* On non-dust shield units only.

2 Year Warranty

This item is backed by a 2 Year Warranty. In the event this item should fail during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Rear Shock (0:49)
    • Raise the Vehicle with a Floor Jack
    • Secure the Vehicle on Jack Stands
    • Use a 21mm wrench to hold the lower shock bolt
    • Remove the lower shock nut with a 21mm socket and ratchet
    • Remove one of the two 14mm bolts from the top of the shock
    • Hold the shock as you remove the other 14mm bolt
    • Pull down the shock
  2. step : Installing the New Strut (1:48)
    • Thread one 14mm bolt through the top of the new shock
    • Put the shock into place
    • Tighten the first 14mm bolt preliminarily
    • Start the second 14mm bolt and tighten it preliminarily
    • Tighten the two 14mm bolts
    • Push the lower end of the shock into place
    • Push the 21mm bolt through the lower end of the shock
    • Start the 21mm nut by hand
    • Use a 21mm wrench to hold the lower shock bolt
    • Tighten the 21mm nut to between 75-80 foot-pounds of torque
    • Lower the vehicle to the ground
    • Repeat this procedure on the other side

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands

  • Ratchets & Related

  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Sockets - Metric

  • 14mm Socket
  • 21mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1999-2000 Cadillac Escalade Rear Shock Absorber Driver or Passenger Side Monro-Matic Plus 32265
  • 1996-2015 Chevy Express 2500 Van Rear Shock Absorber Driver or Passenger Side Monro-Matic Plus 32265
  • 1996-2015 Chevy Express 3500 Van Rear Shock Absorber Driver or Passenger Side (excluding Cutaway Chassis) Monro-Matic Plus 32265
  • 1992-1999 Chevy Suburban K1500 4 Wheel Drive Rear Shock Absorber Driver or Passenger Side (excluding Z71 Models) Monro-Matic Plus 32265
  • 1992-1999 Chevy Suburban K2500 4 Wheel Drive Rear Shock Absorber Driver or Passenger Side (excluding Z71 Models) Monro-Matic Plus 32265
  • 1995-1999 Chevy Tahoe 4 Door 4 Wheel Drive Rear Shock Absorber Driver or Passenger Side Monro-Matic Plus 32265
  • 2000 Chevy Tahoe Rear Shock Absorber V8 5.7L Models Driver or Passenger Side Monro-Matic Plus 32265
  • 1996-2015 GMC Savana 2500 Van Rear Shock Absorber Driver or Passenger Side Monro-Matic Plus 32265
  • 1996-2015 GMC Savana 3500 Van Rear Shock Absorber Driver or Passenger Side (excluding Cutaway Chassis) Monro-Matic Plus 32265
  • 1992-1999 GMC Suburban K1500 Rear Shock Absorber Driver or Passenger Side Monro-Matic Plus 32265
  • 1992-1999 GMC Suburban K2500 Rear Shock Absorber Driver or Passenger Side Monro-Matic Plus 32265
  • 1995-1999 GMC Yukon 4 Door 4 Wheel Drive Rear Shock Absorber Driver or Passenger Side Monro-Matic Plus 32265
  • 2000 GMC Yukon Rear Shock Absorber V8 5.7L Models Driver or Passenger Side Monro-Matic Plus 32265

This part replaces:

  • Monro-Matic Plus 32265
Only 4 left in stock
Part #: MNSHA00007



Monro-Matic Plus
Brand #: 32265

How-to Video:

(03:20 min)