Replaces

Saab 9-5 Heater Hose (with Plastic Manifold and Oetiker Clamps) - 1AEMX00119

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

This replacement heater hose is just what you need to get your vehicle in good working order again.

Specifications:

  • Heater to Engine (T-Hose Assembly)
    • Includes Plastic Manifold and Oetiker Clamps
  • Replaces dealer part number: 4756672
  • Direct replacement
  • Built to strict quality control standards
This heater hose makes a great replacement and has good cost savings over the part from the dealer.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Disconnect the battery (1:45)
    • Disconnect the negative battery cable using your 8mm wrench
  2. step : Move the coolant tank out of the way (1:53)
    • Start out by removing the two 13 mm bolts that hold the strut brace on the passenger's side
    • Remove the two 10 mm bolts using your socket and ratchet.
    • Pull the coolant tank out and set to the side; there’s no need to disconnect it, just take care not to spill any coolant.
  3. step : Loosen the alternator and tensioner (2:25)
    • Remove the 15 mm nut on the top of the alternator.
    • Remove the oil cap.
    • Pull off the cover.
    • Use a 3/8 ratchet to release the tension on the serpentine belt and remove the belt.
    • Remove the three 15 mm bolts securing the belt tensioner.
    • Pull the alternator and tensioner pulleys out of the way a bit and remove the coolant elbow.
    • Remove the old O rings and any debris from the old coolant elbows.
  4. step : Install the new coolant elbows. (5:30)
    • Use some penetrating oil to help seat the O rings and install the new coolant elbows.
    • Bolt the tensioner and alternator in place.
    • Put the serpentine belt back on, using a ratchet handle on the tensioner to get it onto the pulleys.
    • Put the cover and oil cap back on.
    • Use a 10 mm and 13 mm sockets and ratchet to bolt the coolant tank back in place.
    • Reconnect the battery using an 8 mm socket and ratchet or wrench.

Tools needed for replacement:

    General Tools

  • Drain Pan
  • Funnel

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Sockets - Metric

  • 13mm Socket
  • 10mm Socket
  • 15mm Socket
  • 8mm Socket

  • Specialty Tools

  • Bent Tipped Awl

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1999-2003Saab 9-5 Saab 9-5 Heater Hose (with Plastic Manifold and Oetiker Clamps) L4 2.3L
2004-2009Saab 9-5 Saab 9-5 Heater Hose (with Plastic Manifold and Oetiker Clamps)
Only 2 left in stock
Part #: 1AEMX00119


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(11:40 min)