1ASHR00030-Rear Wheel Bearing & Hub Assembly


Rear Wheel Bearing & Hub Assembly TRQ


Part Details

  • Bearing Type: Ball Bearing

This part replaces:

  • Hollander 538-01576B
  • TRQ BHA54176
  • OE # 7470555
Save 19%
List: $73.95 Save: $14.00
Part 1ASHR00030
In Stock

Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Brand #: BHA54176

Frequently bought together

Vehicle Fit
Warranty & Shipping
How-To & Tools

Part Details

  • Bearing Type:   Ball Bearing

Precision Engineered

From the highest grade SAE 1055 / 65Mn high carbon steel to exact OEM design.
100% Factory tested to precise OEM tolerances.

Highest Quality Materials

High quality, multi-lip seal reduces the intrusion of dirt and water. Heavy duty grease resists high temperature, moisture, and reduces intense friction.

Direct Fit Replacement

Guaranteed to fit and function correctly for your specific application.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Wheel (0:50)
    • Pry off the center cap by hand
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (1:13)
    • Remove the 12mm bolt from the brake caliper
    • Remove the 13mm bolt from the bracket
    • Pry the brake pads out with a flat blade screwdriver to push the caliper pistons in
    • Pull the caliper aside
    • Remove the brake pads
  3. step : Removing the Brake Rotor (2:26)
    • Remove the two 15mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
    • If the rotor will not come off, strike the center of the rotor with a hammer to loosen it
  4. step : Removing the Wheel Hub (4:23)
    • Disconnect the ABS sensor wiring harness
    • Remove the four 13mm bolts from the hub
    • Strike the hub with a hammer to loosen
    • Pull off the hub
    • Pull of the brake backing plate
    • Clean the hub mounting area with a wire brush
  5. step : Installing the New Wheel Hub (5:57)
    • Hold the backing plate in place with the open end facing the front of the vehicle
    • Put the hub into place with the ABS sensor connector facing the front of the vehicle
    • Start one bolt into the hub
    • Start the other three bolts
    • Tighten the three 13mm bolts into the hub to 60 foot-pounds of torque
    • Connect the ABS sensor wiring harness
  6. step : Installing the New Brake Rotor (7:36)
    • Slide the rotor on
    • Thread one lug nut to hold the rotor in place
    • Put the caliperbracket back into place
    • Start the two 15mm bolts by hand
    • Tighten the bolts to 60 foot-pounds of torque
  7. step : Installing the New Brake Pads (9:21)
    • Install the new brake pads into the caliper bracket
    • Put the caliper on
    • Thread the 12mm bolt by hand
    • Tighten the 12mm bolt to between 12 – 15 foot-pounds
    • Insert the 13mm bolt into the bracket
    • Remove the placeholder lug nut
  8. step : Reattaching the Wheel (10:08)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap
  9. step : Testing the Brakes (10:35)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Hammer
  • Jack Stands
  • Floor Jack
  • Wire Brush

  • Ratchets & Related

  • Socket Extensions
  • A Piece of Pipe (for leverage)
  • Ratchet
  • 1/2 Inch Breaker Bar
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 15mm Socket
  • 12mm Socket
  • 19mm Socket
  • 13mm Socket

  • Wrenches - Metric

  • 15mm Wrench

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
2000-2005Buick LeSabre Buick LeSabre Rear Wheel Bearing & Hub Assembly
2006-2011Buick Lucerne Buick Lucerne Rear Wheel Bearing & Hub Assembly
1997-2005Buick Park Avenue Buick Park Avenue Rear Wheel Bearing & Hub Assembly
1991Buick Reatta Buick Reatta Rear Wheel Bearing & Hub Assembly
1991-1993Buick Riviera Buick Riviera Rear Wheel Bearing & Hub Assembly
1995-1999Buick Riviera Buick Riviera Rear Wheel Bearing & Hub Assembly
1991-1992Cadillac Allante Cadillac Allante Rear Wheel Bearing & Hub Assembly
2006-2011Cadillac DTS Cadillac DTS with RPO Code JL9 (Power 4 Wheel ABS Disc Brakes) Rear Wheel Bearing & Hub Assembly
2000-2005Cadillac Deville Cadillac Deville with ABS Brakes Rear Wheel Bearing & Hub Assembly
1991-1992Cadillac Eldorado Cadillac Eldorado Rear Wheel Bearing & Hub Assembly
1991-1992Cadillac Seville Cadillac Seville Rear Wheel Bearing & Hub Assembly
1997-2000Chevrolet Malibu Chevrolet Malibu Rear Wheel Bearing & Hub Assembly
1995-2003Oldsmobile Aurora Olds Aurora Rear Wheel Bearing & Hub Assembly
1997Oldsmobile Cutlass Olds Cutlass Rear Wheel Bearing & Hub Assembly
1998-1999Oldsmobile Cutlass Olds Cutlass Rear Wheel Bearing & Hub Assembly
1991-1992Oldsmobile Toronado Olds Toronado Rear Wheel Bearing & Hub Assembly
2000-2005Pontiac Bonneville Pontiac Bonneville Rear Wheel Bearing & Hub Assembly
1999-2005Pontiac Grand Am Pontiac Grand Am SE Rear Wheel Bearing & Hub Assembly

Part Interchange

Brand Label Part Number
ACDelco 20-55
ACDelco 20-92
Chicago Rawhide BR930471
Chicago Rawhide BR930074
Drive Tech America NT512003
GMB 730-0052
General Motors 7470519
General Motors 7467119
General Motors 7470555
General Motors 7466992
General Motors 7470556
General Motors 7467113
General Motors 7470520
General Motors OEM 7470555
General Motors OEM 7467119
General Motors OEM 7470520
General Motors OEM 7470556
General Motors OEM 7470519
General Motors OEM 7466992
General Motors OEM 7467113
Green Ball RW492
MOOG Hub Assemblies 512003
Mevotech H512003
Raybestos 712003
Raybestos Brakes 712003
SKF BR930471
SKF BR930074
Sealed Power B20X92
Timken 512003

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Brand #: BHA54176
Product Reviews
5.00/ 5.0
5 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Easy installation
I reviewed the installation video twice, wrote down the steps and got the tools ready. The installation went just like on the video and took about two hours which included washing down the inside of the wheel rim. Parts fit well, good quality and the part was delivered in five working days. Great quality and price. Who could ask for more.
July 16, 2017
No complaints!
I have been satisfied with all the parts Ive ordered and will continue to order parts in the future.
December 25, 2017
Great online parts
Well let me start by saying I was vary pleased when I got the rear wheel bearing for my 03 Buick Lesabre The quality of TRQ surprise me and for less then $40 compared to almost $300 from ANY parts stores around Augusta, ME I work on my own cars because I am vary capable and love working on cars Trucks well pretty much anything mechanical I would recommend this a hundred and 20% to anyone looking to buy parts cheap and the best part is you dont even have to deal with the part store employees that dont know jack s**t
January 15, 2018
This hub fit perfectly and appears to be of good quality. Initially I would recommend the TRQ hubs, but time will tell the story. It has only been on the car a few weeks.
May 20, 2018
Perfect fit!
Was a challenge to get the old assembly off (hammering and lots of krill oil did not do the trick). Was marvelous to have 1aauto video to guide me through the replacement!!! Found a 2nd video that showed me how to use a piece of all thread to release the old unit. BINGO! Part was a perfect fit--JOB DONE!!! /Diane
August 5, 2019
Customer service


Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

Rear Wheel Bearing & Hub Assembly TRQ-1ASHR00030 does not fit your:

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.