Features:

  • Brand New Motorcraft Radiator Fan Clutch
  • Built to original specifications
  • OE replacement part

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Air Intake (0:29)
    • Disconnect the PCV and breather hose
    • Loosen the two hose clamps with a flat blade screwdriver
    • Disconnect the hoses
    • Remove the air intake
  2. step : Removing the Coolant Bottle and Power Steering Reservoir (1:05)
    • Remove the hose from the radiator fill
    • Remove the two 10mm bolts from the coolant bottle
    • Remove the coolant bottle
    • Remove the 8mm bolt from the power steering reservoir
  3. step : Removing the Upper Radiator Fan Shroud (1:35)
    • Remove the 10mm bolt on either end of the radiator fan shroud
    • Slide back the hose clamp
    • Disconnect the coolant hose from the radiator
    • Pull up and remove the fan shroud
  4. step : Removing the Fan and Fan Clutch (2:30)
    • Disconnect the fan connector
    • Remove the 8mm bolt from the fan sensor
    • Move the sensor off to the side
    • Hold the water pump pulley with a wrench
    • Remove the 36mm nut from the fan clutch with a thin wrench and bar for leverage
    • Spin the fan clutch off
  5. step : Removing the Fan from the Fan Clutch (4:12)
    • Remove the four 10mm bolts from the fan
    • Push the fan clutch out
  6. step : Installing the Fan to the Fan Clutch (5:01)
    • Press the clutch into the fan
    • Tighten the four 10mm bolts to the clutch
    • Tighten the bolts to 62 inch-pounds
  7. step : Installing the Fan and Fan Clutch (6:04)
    • Install the fan to the water pump shaft
    • Hold the water pump pulley in place
    • Tighten the nut with a 36mm wrench
    • Connect the sensor
    • Tighten the 10mm bolt to the lead
  8. step : Reinstalling the Fan Shroud (7:30)
    • Insert the shroud into place
    • Tighten the 10mm bolts to the shroud
    • Connect the coolant hose
    • Close the hose clamp
  9. step : Reinstalling the Power Steering Reservoir (8:35)
    • Tighten the 8mm bolt to the power steering reservoir
    • Tighten the 10mm bolts to the coolant
  10. step : Installing the Air Intake (8:54)
    • Connect the air intake
    • Tighten the hose clamps
    • Connect the PCV and breather hoses
  11. step : Reinstalling the Coolant Bottle (9:30)
    • Tighten the 10mm bolts to the coolant bottle
    • Connect the hose to the radiator
    • Fill the coolant and radiator to the appropriate level
    • Run the engine

Tools needed for replacement:

    Allen Wrenches

  • 8mm Allen Wrench

  • General Tools

  • Drain Pan

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions

  • Sockets - Metric

  • 36mm Socket
  • 8mm Socket
  • 10mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Problem solve
Always try and use quality parts and 1aauto have them product arrive on time and install same day, work as intended!
August 15, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 3 answers
What size wrench is needed to replace this fan clutch?
steve on Aug 26, 2015
BEST ANSWER: 36MM but some have used 1-7/16th. Strongly recommend narrow 36mm so you have room to hold pulley with the pulley retaining wrench.

Vehicle Fit

Year Make Model Description
2006-2010Ford Explorer Ford Explorer Radiator Fan Clutch V8 4.6L Motorcraft YB3076
2006-2010Ford Explorer Ford Explorer Radiator Fan Clutch V6 4.0L Motorcraft YB3076
2011Ford Explorer Ford Explorer Radiator Fan Clutch V6 3.5L Motorcraft YB3076
2007-2010Ford Explorer Sport Trac Ford Explorer Sport Trac Radiator Fan Clutch V8 4.6L Motorcraft YB3076
2007-2010Ford Explorer Sport Trac Ford Explorer Sport Trac Radiator Fan Clutch V6 4.0L Motorcraft YB3076
2006-2010Mercury Mountaineer Mercury Mountaineer Radiator Fan Clutch V6 4.0L Motorcraft YB3076
2006-2010Mercury Mountaineer Mercury Mountaineer Radiator Fan Clutch V8 4.6L Motorcraft YB3076

This part replaces:

  • Motorcraft YB3076
  • Hollander 326-00105
  • OE # YB3076
  • OE # 7L2Z8A616A
Only 2 left in stock
Part #: MCRFC00002


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

MOTORCRAFT
Brand #: YB3076

How-to Video:

(10:35 min)