Our aftermarket cooling fan assemblies are some of the highest quality replacements on the market! This radiator cooling fan assembly is a complete, ready to bolt on, direct replacement part.


  • New, not rebuilt, electric motor
  • Geometrically designed plastic blade for optimal circulation and uniform balance
  • Shroud designed to ensure structural integrity and endurance for maximum performance
  • 100% Performance factory tested
  • Replaces original assemblies that are melted or worn out
  • Comes with proper plug for trouble free installation
  • Replaces dealer part numbers: 1W1Z 8C607 AA, 1W1Z8C607AA, 6U2Z 8C607 D, 6U2Z8C607D, YW1H8C607AC, YW1H 8C607 AC, YW1HAC, YW1H AC, YW7H8C607AB, YW7H 8C607 AB, YW7H8C607AC, YW7H 8C607 AC, YW7HAB, YW7H AB, YW7HAC, YW7H AC, 1W7H 8C607 AA, 1W7H8C607AA, 1W7H AA, 1W7HAA
  • Correct for models that use a resistor that is attached to the fan shroud (Built after 4/08/00 production date)

Now you can buy a high quality radiator cooling fan motor assembly that is built to strict quality control standards. This cooling motor assembly makes a great replacement and has substantial cost savings over a dealer fan assembly.

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Radiator Fan (0:52)
    • Disconnect the radiator fan wiring lead with a flat blade screwdriver
    • Remove the two 8mm bolts from the radiator fan
    • Remove the 8mm bolt from the radiator bottle
    • Pull the radiator bottle aside
    • Pull the fan toward the passenger side and lift it up
    • Pull the fan toward the engine and down to bring out the radiator hose hook
    • Pull the fan up and out
  2. step : Installing the New Radiator Fan (3:57)
    • Put the radiator hose hook onto the new fan
    • Slide the fan into place
    • Bring the fan tabs and radiator hose hook into place
    • Put the radiator bottle into place
    • Insert the two 8mm bolts into the radiator fan
    • Insert the 8mm bolt into the radiator bottle
    • Connect the radiator fan wiring harness

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 8mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2000 Ford Crown Victoria Radiator Cooling Fan Assembly (Built After 4/08/00 Production Date)
  • 2001-2002 Ford Crown Victoria Radiator Cooling Fan Assembly
  • 2000 Lincoln Town Car Radiator Cooling Fan Assembly (Built After 4/08/00 Production Date)
  • 2001-2002 Lincoln Town Car Radiator Cooling Fan Assembly
  • 2000 Mercury Grand Marquis Radiator Cooling Fan Assembly (Built After 4/08/00 Production Date)
  • 2001-2002 Mercury Grand Marquis Radiator Cooling Fan Assembly

This part replaces:

  • OE # 1W1Z8C607AA
  • Hollander 674-00718*,674-00748
  • Partslink FO3115121
  • Dorman 620-121
  • TYC 620680
  • DEPO 331-55003-000
Part #: 1ARFA00175

How-to Video:

(07:38 min)