Radiator Cooling Fan Assembly - 1ARFA00022

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Our aftermarket cooling fan assemblies are some of the highest quality replacements on the market! This radiator fan assembly is a complete, ready to bolt on, direct replacement part.


  • New, not rebuilt, electric motor
  • Geometrically designed plastic blades for optimal circulation and uniform balance
  • Plastic shroud designed to ensure structural integrity and endurance for maximum performance
  • Performance tested
  • Replaces original assemblies that are melted or worn out
  • Comes with proper plug for trouble free installation

Now you can buy a high quality cooling fan assembly that is built to strict quality control standards. It is a great replacement and has substantial cost savings over a dealer unit.

Our electrical and electronic parts are subject to strict quality control testing. Please ensure proper diagnosis of this item before purchasing as the item cannot be returned once installed or plugged in.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Radiator Fan (0:40)
    • Disconnect the radiator overflow hose with a flat blade screwdriver
    • Pull the overflow reservoir bottle up and out
    • Push the teeth together on the radiator hose clamp with pliers
    • Slide the radiator hose clamp back
    • Remove the upper radiator hose
    • Disconnect the radiator fan harness
    • Remove the 10mm bolts at the top of the radiator fan
    • Remove the four 10mm bolts from the splash guard beneath the car
    • Remove the splash guard
    • Remove the two 10mm bolts beneath the radiator fan
  2. step : Installing the New Radiator Fan (2:34)
    • Lower the radiator fan into place
    • Insert and tighten the two 10mm bolts on top of the radiator fan
    • Insert and tighten the two 10mm bolts on the bottom of the radiator fan
    • Reconnect the radiator fan wiring harness
    • Push the upper radiator hose into place
    • Slide the hose clamp forward on the upper radiator hose with pliers
    • Insert the splash guard into place
    • Insert and tighten the four 10mm bolts on the splash guard
    • Tighten the coolant drain
    • Push the coolant reservoir bottle into place
    • Connect the radiator overflow hose

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1997-1998Acura EL Acura EL Radiator Cooling Fan Assembly
1992-1998Honda Civic Honda Civic Radiator Cooling Fan Assembly
1993-1997Honda Civic Del Sol Honda Civic Del Sol Radiator Cooling Fan Assembly
Part #: 1ARFA00022

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(03:46 min)