Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

This replacement 4 piece set of power window motors is just what you need to get your car in good shape again! If your window regulators are good, but the motors are burned out or weak, then these are the parts for you.

Specifications:

  • Comes as a Set of 4
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT & REAR
  • Replaces dealer part numbers: 88987651, 88987652
  • Direct replacements
  • New not remanufactured
  • Built to strict quality control standards

These power window motors make great replacements and have substantial cost savings over dealer units.

Our electrical and electronic parts are subject to strict quality control testing. Please ensure proper diagnosis of this item before purchasing as the item cannot be returned once installed or plugged in.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove door panel. (0:55)
    • For more detailed instructions see our other videos.
  2. step : Remove water shield. (1:52)
    • Carefully remove the water shield.
    • Take care not to rip it, as it keeps water from getting into your door.
  3. step : Unbolt Regulator (2:46)
    • Plug your power windows back in and tape it up.
    • Lift up the window and tape it up out of the way.
    • Remove the bolts with your wrench or socket and ratchet.
    • Loosen up your wiring harness.
    • Feed your harness in and it comes right out.
    • Take out the motor first and then the regulator.
  4. step : Install the new regulator (4:10)
    • Attach the new motor to the regulator using the bolts that came with it.
    • Replace the regulator and motor back into their original positions, regulator first.
    • Feed the harness back through.
    • Bolt the track back in.
    • Tighten the regulator bolts and your power window motor bolts.
  5. step : Test (6:30)
    • Test the to make sure the wiring is hooked up correctly.
    • Untape and attach the window.
    • Test again to make sure the window isn’t straining and everything works.
  6. step : Re-assemble (7:38)
    • Replace the water shield.
    • Reassemble the door panel.
    • For more detailed instructions refer to our other videos.

Tools needed for replacement:

    General Tools

  • Putty Knife

  • Materials, Fluids, and Supplies

  • Cloth Rags

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • Door Panel Removal Tool

  • Torx Drivers & Sockets

  • T27 Torx Driver

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1999-2005Buick Century Buick Century Power Window Motor 4 Piece Set
1999-2004Buick Regal Buick Regal Power Window Motor 4 Piece Set
2003-2005Chevy Impala Chevy Impala Power Window Motor 4 Piece Set
1998-2002Oldsmobile Intrigue Olds Intrigue Power Window Motor 4 Piece Set
1999-2003Pontiac Grand Prix Pontiac Grand Prix 4 Door Power Window Motor 4 Piece Set
Part #: 1AWMK00027

Out of Stock

How-to Video:

(09:58 min)