1APBS00511-Pontiac Grand Am Olds Alero Front & Rear Ceramic Performance Brake Pad & Rotor Kit

Replaces

Pontiac Grand Am Olds Alero Front & Rear Ceramic Performance Brake Pad & Rotor Kit

1APBS00511

Part Details

  • Brake Pad Friction Material: Ceramic
  • Brake Pad Bonding Type: Premium Posi
  • Brake Rotor Type: Cross Drilled & Slotted
  • Kit Includes: (1) Front Ceramic Brake Pad Set
  • Kit Includes: (1) Rear Ceramic Brake Pad Set
  • Kit Includes: (2) Front Performance Brake Rotors
  • Kit Includes: (2) Rear Performance Brake Rotors
  • Front Brake Rotor Venting Type: Vented
  • Rear Brake Rotor Venting Type: Solid
  • Front Brake Rotor Diameter: 10.94 in. (278mm)
  • Wheel Lug Count: 5 Lug
  • Rear Brake Rotor Diameter: 10.94 in. (278mm)
  • Product Line: Performance
FREE SAME DAY SHIPPING
Save 22%
List: $216.95 Save: $47.00
Part 1APBS00511
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

DIY Solutions
Brand #: BFS01824

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Part Details

  • Brake Pad Bonding Type:   Premium Posi
  • Wheel Lug Count:   5 Lug
  • Rear Brake Rotor Venting Type:   Solid
  • Brake Pad Friction Material:   Ceramic
  • Brake Rotor Type:   Cross Drilled & Slotted
  • Front Brake Rotor Diameter:   10.94 in. (278mm)
  • Front Brake Rotor Venting Type:   Vented
  • Rear Brake Rotor Diameter:   10.94 in. (278mm)
  • Kit Includes:
      (1) Front Ceramic Brake Pad Set
      (1) Rear Ceramic Brake Pad Set
      (2) Front Performance Brake Rotors
      (2) Rear Performance Brake Rotors
  • Product Line:   Performance

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quite braking
Positive Mold Technology

Improves durability and performance by allowing for even wear. Eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

Reduces noise and vibration

Environmentally Compliant

Meets the Better Brake Law standards

Thermal Scorched

Accelerates the break-in process and enhances stopping performance from the first stop.

True Non-Interference Vane Design

Retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots remove brake dust and expel gasses during hard braking.

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Wheel (0:41)
    • Remove the lug nut covers
    •  
    • Remove the hub cap
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull of the wheel
  2. step : Removing the Brake Pads (0:58)
    • Turn the rotor by hand or turn the steering wheel to turn the rotor
    • Remove two 12mm bolts from the brake caliper
    • Push the caliper pistons in using a large C-clamp on the brake pad
    • Pull the caliper aside
    • Pull the brake pads off by hand
    • Clean the slides with a wire brush
  3. step : Inspecting the Brakes (2:23)
    • Check the thickness of the brake pads
    • Check the brake pad wear indicator
    • Check for gouges on both sides of the rotor
  4. step : Removing the Brake Rotor (2:41)
    • Remove two 13mm bolts from the brake caliper bracket with a breaker bar or a ratchet and pipe
    • Pull off the brake caliper bracket
    • Pull the rotor off
  5. step : Installing the New Brake Rotor (3:35)
    • Slide the rotor on
    • Thread one lug nut to hold the rotor in place
    • Clean the brake pad slides with a wire brush
    • Put the bracket back into place, start the 13mm bolts by hand
    • Tighten the 13mm bolts to 65 foot-pounds of torque
  6. step : Installing the New Brake Pads (4:55)
    • Install the new brake pads into the bracket with the tab on the rear side
    • Put the caliper on
    • Thread the 12mm bolts by hand
    • Tighten the 12mm bolts to between 15-18 foot-pounds
    • Unthread the place-holder lug nut
  7. step : Reattaching the Wheel (6:13)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to between 90-100 foot-pounds in a crossing or star pattern
    • Reattach the hub cap, aligning the valve stem
    • Reattach the lug nut covers
  8. step : Testing the Brakes (6:59)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Wire Brush
  • Large C-Clamp
  • Floor Jack
  • Jack Stands

  • Ratchets & Related

  • Torque Wrench
  • A Piece of Pipe (for leverage)
  • 1/2 Inch Breaker Bar
  • Ratchet
  • Socket Extensions

  • Sockets - Metric

  • 19mm Socket
  • 12mm Socket
  • 13mm Socket

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
1999-2004Oldsmobile Alero Olds Alero Front & Rear Ceramic Performance Brake Pad & Rotor Kit
1999-2005Pontiac Grand Am Pontiac Grand Am Front & Rear Ceramic Performance Brake Pad & Rotor Kit

Part Interchange

Brand Label Part Number
Aimco 55039
Aimco 55040
Bendix PRT5158
Bendix PRT5155
DIY Solutions BFS01824
DuraGo BR55040
DuraGo BR55039
Raybestos EHT698H
Raybestos SGD698C
Raybestos MGD727CH
Raybestos MGD698CH
Raybestos EHT727H
Raybestos Brakes SGD698C
Raybestos Brakes EHT727H
Raybestos Brakes MGD727CH
Raybestos Brakes MGD698CH
Raybestos Brakes EHT698H
Raybestos Brakes 56655
Raybestos Brakes 56629
Wagner BD125506
Wagner BD125522

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
DIY Solutions
Brand #: BFS01824
Product Reviews
There are no reviews for this item.
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


Pontiac Grand Am Olds Alero Front & Rear Ceramic Performance Brake Pad & Rotor Kit-1APBS00511 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.