O2 Oxygen Sensor - 1AEOS01013

Specifications:

• Direct Fit
  • Correct Connector No cutting or splicing
  • Correct wire length (15.8 Inches)
• Upstream or Downstream Sensor
  • as listed per application
    
• 4 wire configuration
• Replaces dealer part numbers: 3S7A9G444CA, 3S7A 9G444 CA,4L3A9G444AA, 4L3A 9G444 AA, 4L3Z9G444AA, 4L3Z 9G444 AA, 96VB9F472BA, 96VB 9F472 BA, XL3F9F472AA, XL3F 9F472 AA, XL3F9F472AA1, XL3F 9F472 AA1, XL3F9F472BA, XL3F 9F472 BA, XL3Z9F472AA, XL3Z 9F472 AA, XL3Z9F472BA, XL3Z 9F472 BA, XL3Z9F472C, XL3Z 9F472 C, XL3Z9F472D, XL3Z 9F472 D, ZZR118861, ZZR1 18861, ZZR218861, ZZR2 18861
• Built and tested to strict quality control standards

Note: For clarification purposes:

• Upstream location is between the catalytic converter and the engine
• Downstream location is between the catalytic converter and the tailpipe

Install note:

You may be required to reset the vehicle computer after installation of this part.

Our electrical and electronic parts are subject to strict quality control testing. Please ensure proper diagnosis of this item before purchasing as the item cannot be returned once installed or plugged in.

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

step : Identifying your Oxygen Sensors (0:57)

• Upstream oxygen sensors are located in between the engine and the catalytic converter
• Downstream oxygen sensors are located in the catalytic converter or farther away from the engine than the catalytic converter
• Locate your vehicle's firing order diagram
• The bank that contains cylinder one is bank one
• The bank that does not contain cylinder one is bank two, even if it does not contain cylinder two