Specifications:

  • Direct Fit
    • Correct Connector No cutting or splicing
    • Correct wire length (17.71 Inches)
  • Upstream or Downstream Sensor
    • as listed per applications
  • 4 wire configuration
  • 4 terminal configuration
  • Replaces dealer part numbers: 36532RJA004, 36532 RJA 004, 36531P8CA11, 36531 P8C A11, 36531P8CA21, 36531 P8C A21, 36531P8DJ21, 36531 P8D J21, 36531P8EA11, 36531 P8E A11, 36531P8FA11, 36531 P8F A11, 36531PDNA01, 36531 PDN A01, 36531PGEA11, 36531 PGE A11, 36532RCAA51, 36532 RCA A51, 36532RDJA01, 36532 RDJ A01, 36532RJA004, 36532 RJA 004
  • Built and tested to strict quality control standards

Note: For clarification purposes:

  • Upstream location is between the catalytic converter and the engine
  • Downstream location is between the catalytic converter and the tailpipe

If you have a bad O2 sensor causing your vehicle to run poorly or fail an emission test then this is the part for you.

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

Note:  You may be required to reset the vehicle’s computer after installation of this part.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Identifying your Oxygen Sensors (0:57)
    • Upstream oxygen sensors are located in between the engine and the catalytic converter
    • Downstream oxygen sensors are located in the catalytic converter or farther away from the engine than the catalytic converter
    • Locate your vehicle's firing order diagram
    • The bank that contains cylinder one is bank one
    • The bank that does not contain cylinder one is bank two, even if it does not contain cylinder two

Tools needed for replacement:

    1A - No Tools Needed

  • No Tools Needed

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2001-2003 Acura CL V6 3.2L Upstream O2 Oxygen Sensor
  • 2003-2006 Acura MDX V6 3.5L Front Bank Downstream O2 Oxygen Sensor
  • 2005-2008 Acura RL V6 3.5L Front Bank Downstream O2 Oxygen Sensor
  • 2000-2003 Acura TL V6 3.2L Upstream O2 Oxygen Sensor
  • 2004-2005 Acura TL V6 3.2L Front Bank Downstream O2 Oxygen Sensor
  • 2003-2005 Honda Accord Coupe V6 3.0L Automatic Transmission Front Bank Downstream O2 Oxygen Sensor
  • 2003-2005 Honda Accord Sedan V6 3.0L Front Bank Downstream O2 Oxygen Sensor
  • 2006-2007 Honda Accord V6 3.0L Automatic Transmission Front Bank Downstream O2 Oxygen Sensor
  • 2001-2005 Honda Civic GX Upstream O2 Oxygen Sensor
  • 2001-2003 Honda Civic DX LX Upstream O2 Oxygen Sensor
  • 2003 Honda Civic Hybrid L4 1.3L (Built Before VIN 3S020169) Downstream O2 Oxygen Sensor
  • 2002-2004 Honda Odyssey V6 3.5L Upstream O2 Oxygen Sensor
  • 2005-2007 Honda Odyssey V6 3.5L Front Bank Downstream O2 Oxygen Sensor
  • 2008-2010 Honda Odyssey (excluding EX-L Models) V6 3.5L Front Bank Downstream O2 Oxygen Sensor
  • 2003-2004 Honda Pilot V6 3.5L Upstream O2 Oxygen Sensor
  • 2005-2008 Honda Pilot V6 3.5L Front Bank Downstream O2 Oxygen Sensor
  • 2006-2008 Honda Ridgeline V6 3.5L Front Bank Downstream O2 Oxygen Sensor

This part replaces:

  • OE # 36531P8CA11
  • OE # 36532RJA004
  • Standard Motor Products SG1847
Part #: 1AEOS00104

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(03:08 min)