Replaces

O2 Oxygen Sensor Walker Products 250-54013 - WKEOS00099

Walker Products Oxygen Sensor: 250-54013

Walker Products, an ISO 9001-2008 / TS16949 certified company, specializes in the manufacturing and distribution of Fuel System Components and Automotive Engine Management products. Walker is committed to meeting or exceeding OEM or equivalent standards and specifications. This effort is backed by Walker's own manufacturing, product management and engineering expertise.

Specifications:

  • Brand New Walker Oxygen Sensor
  • Direct Fit
    • Correct Connector No cutting or splicing
    • Correct wire length (14.0 Inches)
  • Upstream Sensor (Air / Fuel Ratio)
  • 4 wire configuration
  • Replaces dealer part numbers: 36531PLE003, 36531 PLE 003, 36531PLE305, 36531 PLE 305, 36531PLM306, 36531 PLM 306, 36531PLMA11, 36531 PLM A11, 36531PNDA11, 36531 PND A11, 36531PPA305, 36531 PPA 305, 36531PPAA01, 36531 PPA A01, 36531PRBA01, 36531 PRB A01, 36531PZAA01, 36531 PZA A01, 36531PZAL01, 36531 PZA L01
  • Built and tested to strict quality control standards

Note: For clarification purposes:

  • Upstream location is between the catalytic converter and the engine
  • Downstream location is between the catalytic converter and the tailpipe

If you have a bad O2 sensor causing your vehicle to run poorly or fail an emission test then this is the part for you.

Our electrical and electronic parts are subject to strict quality control testing .  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

Note:  You may be required to reset the vehicle’s computer after installation of this part.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Identifying your Oxygen Sensors (0:57)
    • Upstream oxygen sensors are located in between the engine and the catalytic converter
    • Downstream oxygen sensors are located in the catalytic converter or farther away from the engine than the catalytic converter
    • Locate your vehicle's firing order diagram
    • The bank that contains cylinder one is bank one
    • The bank that does not contain cylinder one is bank two, even if it does not contain cylinder two

Tools needed for replacement:

    1A - No Tools Needed

  • No Tools Needed

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(03:08 min)

Tools List:

    1A - No Tools Needed

  • No Tools Needed



This part replaces:

  • Walker Products 250-54013

Vehicle Fit

  • 2002-2004 Acura RSX Type S Upstream O2 Oxygen Sensor (Air / Fuel Ratio) Walker Products 250-54013
  • 2002-2004 Honda CR-V Upstream O2 Oxygen Sensor (Air / Fuel Ratio) L4 2.4L Walker Products 250-54013
  • 2001-2005 Honda Civic HX Upstream O2 Oxygen Sensor (Air / Fuel Ratio) L4 1.7L Walker Products 250-54013
  • 2004-2005 Honda Civic LX DX Upstream O2 Oxygen Sensor (Air / Fuel Ratio) L4 1.7L Walker Products 250-54013
Only 1 left in stock
Part #: WKEOS00099

Ships Same Day for orders placed by 4 P.M. ET

Walker Products
Brand #: 250-54013

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More