1AACS00037-Nissan Maxima Infiniti I30 I35 Front Driver & Passenger Side 2 Piece CV Axle Shaft Set

Replaces

Nissan Maxima Infiniti I30 I35 Front Driver & Passenger Side 2 Piece CV Axle Shaft Set TRQ CSA82472

1AACS00037

Part Details

  • Set Quantity: 2 Piece

This part replaces:

  • Hollander 447-60965R
  • Hollander 447-60966L
  • A1 Cardone 66-6190
  • A1 Cardone 66-6192
FREE SAME DAY SHIPPING
Save 39%
List: $235.95 Save: $91.00
Part 1AACS00037
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: CSA82472

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Part Details

  • Set Quantity:   2 Piece

CV axles are designed to transmit the power from your vehicle's drivetrain to the wheels while being able to flex and pivot to the demands of the steering and suspension systems.  If your vehicle is making clicking noises at lower speeds or when making turns, it may be time to replace your CV axles with our 100% brand new assemblies.

100% New Components

For quality fit, finish, and easy installation.

Heat Treated

For longer-lasting life and consistent performance under different road conditions.

Precision Machined

And made of brand new components, held to tighter tolerances for better consistency than rebuilt parts.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Wheel (1:30)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Axle from the Hub (1:51)
    • Twist the cotter pin out of the axle
    • Remove the 32mm hub nut
    • Make sure the axle moves freely in the hub
    • If the axle is seized, thread the hub nut on, and strike the axle with a hammer to loosen it
  3. step : Pulling Aside the Stabilizer Link (3:05)
    • Hold the lower stabilizer link stud with a 14mm wrench
    • Remove the lower 15mm nut from the stabilizer link
    • Push the stabilizer link out of the lower control arm
  4. step : Pulling Aside the Lower Control Arm (3:57)
    • Remove the six 22mm bolts from the lower control arm
    • Pull the control arm down
  5. step : Removing the Axle Shaft (4:49)
    • Push the axle out of the hub
    • Have a drain pan ready
    • Separate the axle from the transmission with a pry bar
  6. step : Installing the New Axle (5:34)
    • Push the axle into place at the transmission
    • Push the axle into the wheel hub
  7. step : Reinstalling the Control Arm (6:12)
    • Raise the control arm into place
    • Start the six 22mm bolts into the control arm
    • Tighten the 22mm bolts to 120 foot-pounds of torque
  8. step : Reinstalling the Stabilizer Link (7:03)
    • Push the stabilizer link into place
    • Hold the lower stabilizer link stud with a 14mm wrench
    • Fasten the lower 15mm nut onto the stabilizer link
  9. step : Fastening the Axle (7:18)
    • Install the 32mm hub nut
    • Have an assistant press the brake pedal
    • Tighten the hub nut to 217 foot-pounds
    • Insert the cotter pin into the axle
  10. step : Refilling the Transmission Fluid (7:49)
    • Have a drain pan ready
    • Remove the drain plug from the transmission with a 10mm Allen wrench
    • Fill the transmission, using a hose, until fluid begins to drip out
    • Insert the drain plug
  11. step : Reattaching the Wheel (8:27)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Have your vehicle professionally aligned

Tools needed for replacement:

    Air Powered Tools

  • 1/2 Inch Air Impact Gun

  • General Tools

  • Drain Pan
  • Jack Stands
  • Assistant
  • Floor Jack

  • Hex Wrenches

  • 10mm Allen Wrench

  • Materials, Fluids, and Supplies

  • Gear Oil

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Torque Wrench
  • A Piece of Pipe (for leverage)
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 22mm Socket
  • 15mm Socket
  • 21mm Socket
  • 32mm Socket

  • Wrenches - Metric

  • 14mm Wrench

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Do these fit a manual transmission?
Eugene I March 14, 2019
This part is specific to vehicles with a particular set of options. We will need more information about your vehicle to confirm the fit.
Emma F March 15, 2019
Will this fit a 2002 Maxima SE with Manual transmission?
Charles V January 4, 2020
Thanks for your inquiry. This is not listed to fit vehicles with a manual transmission. We do not have the correct part for your vehicle at this time.
Peter L January 4, 2020

Fits the following Makes:

Year Make Model Description
2000-2001Infiniti I30 Infiniti I30 (excluding Limited Slip Differential) Front Driver & Passenger Side 2 Piece CV Axle Shaft Set
2002-2004Infiniti I35 Infiniti I35 Front Driver & Passenger Side 2 Piece CV Axle Shaft Set
2000-2001Nissan Maxima Nissan Maxima Automatic Transmission (excluding Limited Slip Differential) Front Driver & Passenger Side 2 Piece CV Axle Shaft Set
2000-2001Nissan Maxima Nissan Maxima Automatic Transmission Front Driver & Passenger Side 2 Piece CV Axle Shaft Set
2002-2003Nissan Maxima Nissan Maxima Automatic Transmission Front Driver & Passenger Side 2 Piece CV Axle Shaft Set

Part Interchange

Brand Label Part Number
Cardone New 66-6192
Cardone New 66-6190
Cardone Select 66-6190
Cardone Select 66-6192
Datsun/Nissan 391002Y115
Datsun/Nissan 391017Y00A
Datsun/Nissan 391002Y175
Datsun/Nissan 391012Y975
Datsun/Nissan 391015Y815
Datsun/Nissan 391005Y815
GSP NCV53107
GSP NCV53106
Infiniti 391002Y175
Infiniti 391005Y815
Infiniti 391015Y815
Infiniti 391002Y115
Infiniti 391012Y975

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
TRQ
Brand #: CSA82472
Product Reviews
4.60/ 5.0
5 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
2
0
0
0
Work very well
Easy to install, video was extremely helpful! Will be back when other problems arise!
June 21, 2017
CV axle shaft
I had purchased remanufactured A1Cardone CV axle shafts to replace my worn out original parts for my 2002 Infiniti I35. After installing them, both left and right remanufactured axles had a terrible vibration, a problem that did not occur with my 16 year old worn out original parts. Mine were clicking when turning. I ended up replacing the A1 Cardone parts after only a week of driving with the 1AAuto brand new, not remanufactured cv axle shafts. The vibration is gone. My 16 year old car now drives smoothly once again.
May 28, 2018
Great
I ended up not needing these parts but the shipping was fast and correct. I made the mistake of ordering the wrong parts but it was my fault and not 1 A autos. I will purchase from again.
April 8, 2019
Great so far
So far so good!!!
October 16, 2019
I already had these installed. I am now experiencing a low-speed vibration. I am not sure if it is due to this or something else.
November 7, 2019
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


Nissan Maxima Infiniti I30 I35 Front Driver & Passenger Side 2 Piece CV Axle Shaft Set TRQ CSA82472-1AACS00037 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.