1APBS00689-Nissan Infiniti Front Ceramic Performance Brake Pad & Rotor Kit

Replaces

Nissan Infiniti Front Ceramic Performance Brake Pad & Rotor Kit

1APBS00689

Part Details

  • Brake Pad Friction Material: Ceramic
  • Brake Rotor Type: Cross Drilled & Slotted
  • Brake Pad Bonding Type: Premium Posi
  • Kit Includes: (1) Front Ceramic Brake Pad Set
  • Kit Includes: (2) Front Performance Brake Rotors
  • Front Brake Rotor Venting Type: Vented
  • Wheel Lug Count: 6 Lug
  • Front Brake Rotor Diameter: 12.60 in. (320mm)
  • Product Line: Performance
  • Brake Rotor Coating: Premium G-Coated
  • Kit Includes: Brake Pad Contact Point Grease
  • Kit Includes: Brake Pad Hardware
FREE SAME DAY SHIPPING
Save 36%
List: $163.95 Save: $59.00
Part 1APBS00689

Out of Stock

Free GROUND SHIPPING

Close



TRQ Performance
Brand #: BKA12536
Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Part Details

  • Brake Pad Bonding Type:   Premium Posi
  • Wheel Lug Count:   6 Lug
  • Brake Pad Friction Material:   Ceramic
  • Brake Rotor Type:   Cross Drilled & Slotted
  • Front Brake Rotor Diameter:   12.60 in. (320mm)
  • Brake Rotor Coating:   Premium G-Coated
  • Front Brake Rotor Venting Type:   Vented
  • Kit Includes:
      (1) Front Ceramic Brake Pad Set
      (2) Front Performance Brake Rotors
      Brake Pad Contact Point Grease
      Brake Pad Hardware
  • Product Line:   Performance

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quite braking
Positive Mold Technology

Improves durability and performance by allowing for even wear. Eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

Reduces noise and vibration

Environmentally Compliant

Meets the Better Brake Law standards

Thermal Scorched

Accelerates the break-in process and enhances stopping performance from the first stop.

True Non-Interference Vane Design

Retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots remove brake dust and expel gasses during hard braking.

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Wheel (0:44)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Inspecting the Brakes (1:10)
    • Check for gouges on both sides of the rotor
    • Check the thickness of the brake pads
  3. step : Removing the Brake Pads (1:27)
    • Remove the two 14mm bolts from the brake caliper
    • Pull the caliper aside
    • Pry the brake pads into the caliper with a flat blade screwdriver
    • Pry the brake pads off with a flat blade screwdriver
  4. step : Removing the Brake Rotor (2:17)
    • Remove the two 21mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
    • If the rotor will not come off, thread one lug nuts and strike the rotor from behind with a hammer
  5. step : Preparing the New Brake Pads and Rotors (3:04)
    • Clean the brake pad slides with a wire brush
    • Apply grease to the caliper slides
    • Apply grease to the brake pad tabs
    • Clean the rotor with brake parts cleaner
  6. step : Installing the New Brake Rotor (4:12)
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Slide the rotor on
    • Thread one lug nut to hold the rotor in place
    • Put the bracket back into place
    • Start the two 21mm bolts by hand
    • Tighten the bolts to 100 foot-pounds of torque
  7. step : Installing the New Brake Pads (5:16)
    • Install the new brake pads into the bracket with the wear indicator on the lower side
    • Put the caliper on
    • Thread the two 14mm bolts by hand
    • Tighten bolts to 25 foot-pounds
    • Remove the placeholder lug nut
  8. step : Reattaching the Wheel (6:09)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
  9. step : Testing the Brakes (6:37)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Large C-Clamp
  • Wire Brush
  • Hammer
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Brake Parts Cleaner
  • Cloth Rags

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • A Piece of Pipe (for leverage)

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 21mm Socket
  • 14mm Socket

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
2004Infiniti QX56 Infiniti QX56 Front Ceramic Performance Brake Pad & Rotor Kit
2005Infiniti QX56 Infiniti QX56 (Built Before 3/05 Production Date) Front Ceramic Performance Brake Pad & Rotor Kit
2005Nissan Armada Nissan Armada (Built Before 3/05 Production Date) Front Ceramic Performance Brake Pad & Rotor Kit
2004Nissan Pathfinder Armada Nissan Pathfinder Armada Front Ceramic Performance Brake Pad & Rotor Kit
2004Nissan Titan Nissan Titan Front Ceramic Performance Brake Pad & Rotor Kit
2005Nissan Titan Nissan Titan (Built Before 3/05 Production Date) Front Ceramic Performance Brake Pad & Rotor Kit

Part Interchange

Brand Label Part Number
Aimco 31328
Bendix PRT5507
DuraGo BR31328
Raybestos EHT1015H
Raybestos MGD1015CH
Raybestos SGD1015C
Raybestos Brakes EHT1015H
Raybestos Brakes MGD1015CH
Raybestos Brakes SGD1015C
Raybestos Brakes 980197
Wagner BD126552

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
TRQ Performance
Brand #: BKA12536
Product Reviews
5.00/ 5.0
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
0
0
Great product, would recommend to everyone who needs brakes replaced!
March 9, 2018
Great parts at an awesome price!
The rotors and pads fir perfect, the install video made it super simple, loving the slotted drilled rotors, going to be great this summer when towing!
April 22, 2020
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


Nissan Infiniti Front Ceramic Performance Brake Pad & Rotor Kit-1APBS00689 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.