1AACS00210-Nissan Frontier Xterra Front Driver & Passenger Side 2 Piece CV Axle Shaft Set
false

Replaces

Nissan Frontier Xterra Front Driver & Passenger Side 2 Piece CV Axle Shaft Set TRQ CSA82541


98-04 Nissan Frontier; Xterra Front CV Axle Shaft Pair
$ 154.95
$206.95
25% OFF
$206.95
25% OFF
FREE SAME DAY SHIPPING
TRQ
CSA82541
In Stock
Part 1AACS00210

Orders must be placed by 2pm ET
Part 1AACS00210
In Stock
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Frequently bought together

Description

Vehicle Fit

Warranty & Shipping
How-To & Tools

Part Details

  • Quantity:   2 Piece

CV axles are designed to transmit the power from your vehicle's drivetrain to the wheels while being able to flex and pivot to the demands of the steering and suspension systems.  If your vehicle is making clicking noises at lower speeds or when making turns, it may be time to replace your CV axles with our 100% brand new assemblies.

100% New Components

For quality fit, finish, and easy installation.

Heat Treated

For longer-lasting life and consistent performance under different road conditions.

Precision Machined

And made of brand new components, held to tighter tolerances for better consistency than rebuilt parts.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories.

Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, or Canada for this item.

Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories.

How to Replace CV Axle Shaft 1998-2004 Nissan Frontier

Created on: 2013-10-22

Check out this 1A Auto video to learn how to replace the CV axle shaft in your 98-04 Nissan Frontier or Xterra.

  1. It's recommended to seek a professional alignment after completing this installation

    step 1 : Removing the Wheel
    • Loosen the 22mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step 2 : Remove the Hub Assembly
    • Place a long flat blade screwdriver in the brake rotor
    • Remove the six 6mm Allen bolts on the hub assembly
    • Remove the circlip on the axle
    • Slide the outer bearing out with the circlip
    • Remove the two Phillips head screws on the washer
    • Remove the two washers with a flat blade screwdriver
  3. step 3 : Removing the Axle
    • Place a flat blade screwdriver against the axle shaft to prevent it from spinning
    • Remove the six 12mm bolts from the axle shaft
    • Remove the cotter pin from the castle nut on the upper part of the steering knuckle with pliers
    • Use a hammer and pick if the pin will not come out
    • Loosen the castle nut with a 22mm wrench
    • Jack underneath the knuckle
    • Remove the castle nut with a 22mm wrench
    • Thread the castle nut on four to five turns with a 22mm wrench
    • Lower the floor jack leaving 1/4 inch between the jack and the lower ball joint
    • Hit the knuckle with a hammer to loosen it from the control arm
    • Raise the knuckle on a jack
    • Remove the castle nut
    • Slowly lower the jack
    • Pull the axle shaft out
  4. step 4 : Installing the New Axle
    • Swap over the washer from the old axle shaft to the new one
    • Feed the new axle in to place pushing the outer part of the axle into the hub assembly first
    • Request the help of an assistant
    • Lower the jack
    • Jack up the knuckle and align the spindle into the ball joint
    • Press down on the control arm to keep it aligned in the ball joint
    • Tighten the 22mm castle nut
    • Lower the jack
    • Push a new cotter pin into the castle nut and bend the ears back
    • Insert and tighten the 6mm bolts to the axle shaft
    • Torque the bolts to 40 foot-pounds
  5. step 5 : Reinstalling the Hub Assembly
    • Insert the two washers
    • Insert and tighten the two Phillips screws to the washers
    • Push in the outer bearing
    • Insert the circlip into place with circlip wires
    • Push on the hub
    • Insert and tighten the six 6mm Allen bolts
    • Tighten the hub bolts to 10 to 12 foot-pounds
  6. step 6 : Reattaching the Wheel
    • Slide the wheel into place
    • Start the 22mm lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern

Tools needed for replacement

  • General Tools

    Hammer

    Jack Stands

    Center Punch

    Floor Jack

  • Hex Wrenches

    6mm Allen Wrench

  • Pliers, Cutters & misc Wrenches

    Circlip Pliers

    Needle nose pliers

  • Ratchets & Related

    A Piece of Pipe (for leverage)

    Socket Extensions

    Torque Wrench

    Ratchet

  • Screwdrivers & Related

    Pry Bar

    Flat Blade Screwdriver

    Phillips Head Screwdriver

  • Sockets - Metric

    12mm Socket

    22mm Socket

  • Wrenches - Metric

    12mm Wrench

Installation Video
Watch video

Fits these Makes

Year Make Model Description
1998-2004Nissan Frontier Nissan Frontier Front Driver & Passenger Side 2 Piece CV Axle Shaft Set
2000-2004Nissan Xterra Nissan Xterra Front Driver & Passenger Side 2 Piece CV Axle Shaft Set

Part Interchange

Brand Label Part Number
Cardone New 66-6193
Cardone Select 66-6193
Datsun/Nissan 391002S660
Datsun/Nissan 391002S600
GSP NCV53133

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

TRQ
CSA82541
In Stock
Part 1AACS00210
Product Reviews
Loading reviews
There are no reviews for this item.
Customer Q&A
No questions have been asked about this item.
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


Nissan Frontier Xterra Front Driver & Passenger Side 2 Piece CV Axle Shaft Set TRQ CSA82541-1AACS00210 does not fit your:



Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.