1ASFK01990-Mazda 3 5 Front & Rear Complete Strut Assembly & Shock Absorber Kit 8 Piece Set


Mazda 3 5 Front & Rear Complete Strut Assembly & Shock Absorber Kit 8 Piece Set TRQ PSA56214

Save 24%
List: $310.95 Save: $76.00
Part 1ASFK01990
In Stock

Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Brand #: PSA56214

Frequently bought together

Vehicle Fit
Warranty & Shipping
How-To & Tools

Part Details

  • Includes:   Sway Bar Links
  • Quantity:   8 Piece Set

Replacing struts used to require specialized tools to compress, remove, and transfer the old spring and mount.  Our Pre-assembled, complete strut & spring assemblies come with all new parts and make the job much quicker and easier for the do-it-yourself mechanic.

Strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut
No modifications, all the parts needed in one kit
Easy install - Pre-assembled, loaded struts
No specialty tools required

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Accessing the Strut (0:53)
    • Remove the lug nuts
    • Pull the wheel free
    • Apply penetrating oil to the bolt holding the lower strut and the upper bolt holding the stabilizer link
    • Remove the clip holding the brake hose to the strut (Use a screwdriver to pry up from below)
    • Pull the hose free
    • Lock locking pliers on the backside of the stabilizer shaft
    • Remove the 14mm bolt
    • Spray the 17mm bolt holding the steering knuckle to the strut with penetrating oil
    • Remove the 17mm bolt using the pipe for extra leverage
  2. step : Removing the Strut (3:11)
    • Spray penetrating oil around the bottom of the strut
    • Hit the steering knuckle with a sledge hammer
    • Once the knuckle moves, place a piece of wood over the knuckle and hammer the rest of the way
    • Remove two of the bolts holding the strut from the back of the engine. Loosen the third bolt
    • Push down on the steering knuckle and push the bottom free
    • Remove the third screw up top to free the strut
  3. step : Replacing the Strut (4:29)
    • Line the strut up with the bolt holes up top. Replace the three bolts firm but not fully tightened
    • Spray penetrating oil on the strut and steering knuckle
    • Once its lined up but a jack underneath the knuckle and use it to force it into place
    • Replace the bolt holding the knuckle to the strut. (Use a torque wrench to tighten it to 80 ft/lbs)
    • Bring the hose down and feed it through into place. Replace the clip
    • Reconnect the stabilizer link. Using locking pliers on the back, thread the nut on and tight to 50-60 ft/lbs
    • Replace the wheel
    • Replace lug nuts, and tighten to 100 ft/lbs. in a star pattern
    • Tighten the upper strut bolts to 25ft/lbs

Tools needed for replacement:

    General Tools

  • Sledge Hammer
  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Channel-Lock Pliers

  • Ratchets & Related

  • Torque Wrench
  • Ratchet
  • A Piece of Pipe (for leverage)

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 17mm Socket
  • 14mm Socket
  • 18mm Socket
  • 19mm Socket
  • 15mm Socket
  • 13mm Socket
  • 16mm Socket

Fits the following Makes:

Year Make Model Description
2004-2006Mazda 3 Mazda 3 Front & Rear Complete Strut Assembly & Shock Absorber Kit 8 Piece Set
2007-2009Mazda 3 Mazda 3 S Front & Rear Complete Strut Assembly & Shock Absorber Kit 8 Piece Set
2007-2009Mazda 3 Mazda 3 i Front & Rear Complete Strut Assembly & Shock Absorber Kit 8 Piece Set
2006-2010Mazda 5 Mazda 5 Front & Rear Complete Strut Assembly & Shock Absorber Kit 8 Piece Set

Part Interchange

Brand Label Part Number
Beck / Arnley 101-5264
Beck/Arnley 101-5264
DIY Solutions SHO00330
DIY Solutions SUS06696
DIY Solutions SUS06888
KYB 343412
KYB SR4084
KYB SR4083
KYB SR4458
KYB SR4457
KYB Shocks & Struts 343412
MOOG K80867
MOOG K80235
MOOG Chassis Products K80235
MOOG Chassis Products K80867
Mazda BP4K28170H
Mevotech MS76830
Mevotech MS76804
Monroe 5607
Monroe 172264
Monroe 172263
Monroe Shocks & Struts 172263
Monroe Shocks & Struts 172264
Monroe Shocks & Struts 5607
Unity Automotive 11681
Unity Automotive 259020
Unity Automotive 11682

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Brand #: PSA56214
Product Reviews
4.60/ 5.0 20
20 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Fits like a glove.
June 24, 2017
Ordered from 1aauto for first time and came in as promised. I replaced them myself then aligned the wheels. Now it drives nice like a new sporty car. Love it. Indeed will come back and order from them again.
Almost perfect
September 25, 2017
I installed this kit in my 2010 Mazda 5 sport. I gave the review only 3 stars because I did run into some issues with the front struts. I had trouble with the brackets that are supposed to hold the brake lines. The opening was too small and the metal was a bit too thick to accept the factory fitting. I had to bend them wide open and tap the brake line in with a screwdriver and hammer and then bend it back into position. Also, the bolts for the top of the assembly are far shorter than the factory bolts. I had some trouble using the factory bolts and had to use the supplied bolts in a few of the holes which were not easy to get in. The rear shocks were easy peasy, as were the end links. The car rides almost like new now.
Great parts
March 23, 2018
Got what I order fast and didn't cost me a arm and a leg will continue to get my parts thru 1a auto
parts fit good
June 5, 2018
the only problem i had was the hole for the brake line was to small but wast a big deal to drill it out
I’m very happy with the competitive prices at 1AAuto
January 8, 2019
1AAuto has the best prices around! Quality products as well!
Good parts good price
March 18, 2019
Ordered parts...put them on...drove away...end of story.
Very nice kit
July 12, 2019
Getting the kit was the only way to go it only make sense to replace the other items as they have just as many miles as the wore out parts. The olny reason I did not give it a 5 star is like the other reviews is the brake line hole is not quite right a little die grinder problem solved. So I did not this going into the purchase. It was a pleasure to get the correct parts the first time. Shipping time was fast. I also had a question about warranty before purchasing called and there customer service was fantastic. Will do business again and would recommend. I am retired service writer and my family still owns the repair shop and the technicians that installed my parts was impressed with the quality of the parts
Fast shipping.
September 13, 2019
Good parts. Install went pretty easy. Had a couple snags. Brake line mount needed a little massaging to fit. And I broke one of the strut tower bolts. Not sure if it was my torque wrench or a crappy bolt.
Great value for the price
September 23, 2019
Threw this kit on my Mazda 3 hatchback. Best bang for buck I could find on the internet and have had good luck with TRQ parts in the past so I rolled the dice. This kit fixed every loud clunk and rattle I had on my worn out suspension and returned the car to a very pleasant drivable state. Time will tell how they perform in the long run. Like others, the brake line bracket needed a little massaging, but it ended up working with a little elbow grease. Take note of the modified bolt/nut configuration on the sway bar links. Took me 5 minutes to figure out why they had no allen key, but the improved design made installation a breeze. I should have watched the how-to videos first. Thanks for the fast and accurate shipping 1A Auto.
October 16, 2019
The items I received work amazing and the How To video is extremely helpful and informative. I always suggest 1A Auto to my automotive shop mates in college!!
2007 Mazda 3
November 9, 2019
Brake line retainer needed to be widened to fit the brake line correctly, but other than that fitment was perfect! Will buy from 1AAuto from now on. Can’t beat the price.
Shocks/struts ensemble
November 30, 2019
This was just very hat I needed. It is as 128.00 cheaper then our local dealers. It arrived in 3 days. Sweet deal. I will definitely recommend this place to my friends
January 15, 2020
This is exactly what I needed for my car. The entire kit for such a good price. For real where can you go wrong!
Decent 2007 Mazda 3
February 9, 2020
I would recommend this product because they fit on my like nothing. Also it’s was decently priced. And definitely would get more parts from 1a auto.
Awesome experience
April 9, 2020
The products I received where exactly what I ordered. The video instructions were spot on with the whole removal and replacement process. I would and have recommended 1Aauto to my friends.
Great products, great prices.
April 10, 2020
Products came quickly, exactly as advertised. Loved the videos on how to install. Very helpful! I will definitely be buying from them again!
Perfect !!!
May 6, 2020
Car feels good now
Excellent customer support
May 15, 2020
They have excellent customer support, had a little issue with my shipping, called them and it was resolved right the way. As the for the parts they fit perfectly & cheaper than my local store They sell you the Parts & show you a step-by-step video how do we replaced it, what more can I say? I'm happy with my purchased for now
September 6, 2020
Good quality for the price
On tab
October 3, 2020
Parts are good quality the service is great and he always on time
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Do you have any suspension for a 2008 mazda speed 3?? I can't find any I'm your page.
May 5, 2016
Not at this time
May 5, 2016
What brand are these part?
March 17, 2017
We have a few different aftermarket companies build these parts specifically for us, as our 1A Auto house brand. They are manufactured to the same OEM specifications as the original part that came with your vehicle. If you have any further questions, please don't hesitate to ask.
March 17, 2017
it is my understanding that 1a auto is the brand name , that is they make their own, and they seem to fit ok
March 17, 2017
I would love to help you out, but unfortunately I don't remember. I do know that they were of really good quality, and relatively easy to install. I basically installed the parts then sold the car.
March 19, 2017
Do these shocks apply for both automatic and standard cars? And does the engine size matter?
September 7, 2019
This is able to fit for automatic and standard vehicles. The parts are also not engine size specific. Please let us know if you have any further questions.
September 9, 2019
July 1, 2020
Thank you for your inquiry. We do not currently have the ability to ship to Australia. We apologize for any inconvenience this may cause. Please let us know if you have any further questions.
July 1, 2020
Before I purchase I want to make sure, the front and rear strut assembly and rear shock absorber fits... the Mazda 3 speed hatchback 2006?
September 19, 2020
Thank you for your inquiry. Yes, according to the information you provided, this part will fit your vehicle. Please let us know if you have any other questions!
September 19, 2020
Customer service


Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

Mazda 3 5 Front & Rear Complete Strut Assembly & Shock Absorber Kit 8 Piece Set TRQ PSA56214-1ASFK01990 does not fit your:

Same Day Shipping

Orders ship same day when ordered by 2pm ET. Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Providing you the highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations every day, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos specific to year, make and model guide you step-by-step through your repair.

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.