Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   4 Piece Set
  • Kit Includes:
      (2) Parking Lights
      (2) Headlights

Specifications:

  • Brand New Lighting Kit
  • Comes as a 4 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacement
  • Built to strict quality control standards
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

These lights do not include bulbs.  If you happen to receive a product with bulbs, the bulbs are for testing and not covered under our warranty.  Our warranty applies to the light assembly only.

  1. step : Handling the Bulbs (0:52)
    • Note: DO NOT TOUCH the bulbs- the oil from your fingers will burn into the light and foul your bulb.
    • Clean with rubbing alcohol and a soft cloth if the bulbs do get touched.
  2. step : Just the bulbs (0:54)
    • Open the door above the headlight assembly.
    • Pull back the rubber ring around the bulb and twist and pull to remove the bulb.
    • Unplug it from the harness.
    • Replace and snug the rubber ring down onto the base of the bulb.
  3. step : Remove the headlight assembly (2:30)
    • Unscrew the two Phillips screws at the top of the headlight.
    • Remove the parking light assembly and unplug the bulbs.
    • Unclip the headlight assembly where the adjustors clip to the car with a flat blade screwdriver.
    • Unplug the harness.
    • Remove the adjustor clip from the car if it doesn't come out with the assembly.
  4. step : Install headlight assembly (5:00)
    • Adjust the adjustor bolts to match the old assembly.
    • Plug the bulbs and harness into the new headlight assembly
    • Clip the headlight assembly back into place.
    • Plug the parking light bulbs into the parking light assembly.
    • Line it up and screw in the two Phillips screws using your Phillips screwdriver.

Tools needed for replacement:

    Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

4.20/ 5.0
10 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
6
2
0
2
0
1999 Explorer headlight assemblies
Order was on time and correct. Parts fit great. Installation video on youtube was very helpful.
January 31, 2017
Everything was as expected
Everything was as expected, on time, and exactly as advertised. The videos sealed the deal in helping me with the project, since I am no mechanic
March 9, 2017
great product
very pleased they were the right replacement parts .looks great @works perfectly I would recommend a1auto wds
April 2, 2017
Easy Online Ordering
This has beenby far the easiest online experience I have encountered. Great video tutorials too!!
January 26, 2018
Headlights
The lights arrived on time, exactly as discribed and great fit, they look great. Only reason for not giving 5 stars is the service lady I spoke with was very knowledgeable regarding parts fits and was not willing to cross reference numbers without me insisting, and then said they where incorrect. I had to verify at another site.
January 30, 2018
bad lens
I guess for" knockoffs" they work - the little tabs for alinement were not formed on the headlight lens, we (shop and I) had to makeshift the tabs, we got really close to being correct, I would think twice and return in the future. The lens were clean and bright and shipping was on time.
April 3, 2018
Not as good as originals
They fit some what but not as well as originals. Signal parts are tight headlamps are another story. Headlights are to small set in at angles pointing down. Ajustment screws and brackets are cheap and dont work a flip. The only good thing about these are they are clear compared to the old ones replaced. I do not recommend these if you want a exact or nice fit and need ajustment.
August 8, 2018
Headlight installation 98 Ford explorer
They are plastic and fragile.slow a steady gets it done.all parts fit perfectly. I use a plastic clearner polish to protect the exterior lens.
August 12, 2018
Replace headlights was not too bad
I tried to clean them, but the price for new ones was worth it. It was hard to replace, as you don’t want to break the plastic. But they look and work great!
August 18, 2018
Ford Explorer Head lights
Cheaper priced than Amazon and way better quality. With th provided installation video, these were easy to install and look great.
September 18, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Does this include bulbs or Is that separate?
Julie B April 25, 2017
No light bulbs not included
Stephen L April 25, 2017
These will come with test bulbs if they come with bulbs. We do not suggest using them when installing the parts.
Derek C April 25, 2017
Seperate
Tara N April 27, 2017
Bulbs are not included.
Indalecio T May 6, 2017
Year Make Model Description
1995-2001Ford Explorer Ford Explorer 4 Piece Set Lighting Kit
1997Mercury Mountaineer Mercury Mountaineer 4 Piece Set Lighting Kit
Part #: 1ALHT00019


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(08:34 min)