Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Color:   Black
  • Finish:   Smooth - Paint to Match

This replacement liftgate handle is just what you need to get your vehicle in good looking form again!

Specifications:

  • Brand New Liftgate Handle
  • Smooth Black Finish
    • Can be painted by buyer to match or installed as is
  • Replaces dealer part number: 15750910
  • Direct replacement for original handle
  • Built to strict quality control standards

This handle is a great replacement and has good cost savings over a dealer unit.

Paint To Match Note:

"Paint to match finish" refers to a smooth, paintable surface. This item will be shipped unpainted but will be ready for paint. Final preparation is suggested for better paint coverage and adhesion. 

This part can also be installed without painting if desired. 

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (0:37)
    • Lift the gate glass
    • Remove the window latch cover clips with a flat blade screwdriver
    • Unclip the tailgate panel
    • Lift up the gate glass and slide the panel out
    • Remove the 7mm bolt from the pull handle
    • Remove the pull handle
    • Unclip the lower panel
  2. step : Removing the Tailgate Handle (1:58)
    • Remove the handle cable
    • Remove the 10mm nuts from the tailgate handle
    • Pry out on the tailgate handle with a flat blade screwdriver
  3. step : Installing the New Tailgate Handle (2:47)
    • Install the tailgate handle
    • Insert and tighten the 10mm nuts onto the tailgate handle
    • Clip the handle cable to the tailgate handle
  4. step : Reinstalling the Door Panel (3:20)
    • Push and re-clip the lower door panel
    • Lift the gate glass to reinstall the upper door panel
    • Replace and tighten the 7mm bolt in the pull handle
    • Replace the clips on the window latch cover

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 7mm Socket

4.00/ 5.0
5 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
1
2
0
0
Easy order, Quick Delivery, Great Online Video Instructions
Everything I could have asked for, and all with ease! Thank you for making this fix such a breeze.
July 10, 2017
Saved $300 with 1A Auto
1A auto provided a less expensive part that retained the quality I was looking for. The ease of installation and how to videos made the repair process much easier. I saved time and money while conveniently operating from my driveway. I highly recommend this website if you like to get things done yourself and save a lot of money.
August 7, 2017
Tahoe black smooth finish rear lIft handle
This lift handle is plastic and I got it to replace the factory metal one which had a broken hinge pin. One star off because of how weak it feels compared to the metal one. I now grab the bottom of the hatch to lift it rather than just the wimpy feeling plastic handle. Second star off because the handle itself was smooth finish but the surround was the rougher finish. Knowing what I know now I would have ordered the rougher finish so the whole handle would be the same. The handle fits well and works correctly.
October 14, 2017
Lift gate handle
Great product and even better resource. Your videos set you apart. Watched the video, disassembled the broken part to make sure that all broken items were accounted for, ordered part. Handle showed up a few days later, painted it, watched video again and installed it with out any problems. My only complaint is that the outer trim piece is textured and not smooth. Very minor issue. Im the only person that notices. Otherwise the process worked great.
October 28, 2017
Gasket challenging to keep in place
The gasket was very challenging to get and keep lined up. I had to remove the unit and re-install when I saw daylight from the inside.
April 21, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2000-2006Chevy Suburban 1500 Chevy Suburban 1500 Smooth - Paint to Match Black Liftgate Handle
2000-2006Chevy Suburban 2500 Chevy Suburban 2500 Smooth - Paint to Match Black Liftgate Handle
2000Chevy Tahoe Chevy Tahoe Smooth - Paint to Match Black Liftgate Handle (excluding Z71 Models)
2001-2006Chevy Tahoe Chevy Tahoe Smooth - Paint to Match Black Liftgate Handle
2000GMC Yukon GMC Yukon Smooth - Paint to Match Black Liftgate Handle (excluding Denali Models)
2001-2006GMC Yukon GMC Yukon Smooth - Paint to Match Black Liftgate Handle
2000-2006GMC Yukon XL 1500 GMC Yukon XL 1500 Smooth - Paint to Match Black Liftgate Handle
2000-2006GMC Yukon XL 2500 GMC Yukon XL 2500 Smooth - Paint to Match Black Liftgate Handle
Part #: 1ABTH00106


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(05:36 min)