1APBS00110-Lexus GS300 GS400 GS430 IS300 SC430 Rear Ceramic Performance Brake Pad & Rotor Kit


Lexus GS300 GS400 GS430 IS300 SC430 Rear Ceramic Performance Brake Pad & Rotor Kit TRQ Performance BKA12128


Part Details

  • Brake Pad Bonding Type: Premium Posi
  • Brake Pad Friction Material: Ceramic
  • Brake Rotor Type: Cross Drilled & Slotted
  • Kit Includes: (1) Rear Ceramic Brake Pad Set
  • Kit Includes: (2) Rear Performance Brake Rotors
  • Rear Brake Rotor Diameter: 12.09 in. (307mm)
  • Rear Brake Rotor Venting Type: Solid
  • Product Line: Performance
  • Brake Rotor Coating: Premium G-Coated
  • Wheel Lug Count: 5 Lug
  • Kit Includes: Brake Pad Contact Point Grease
  • Kit Includes: Brake Pad Hardware
Save 31%
List: $130.95 Save: $41.00
Part 1APBS00110
In Stock

Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ Performance
Brand #: BKA12128

Frequently bought together

Vehicle Fit
Warranty & Shipping
How-To & Tools

Part Details

  • Brake Pad Bonding Type:   Premium Posi
  • Wheel Lug Count:   5 Lug
  • Rear Brake Rotor Venting Type:   Solid
  • Brake Pad Friction Material:   Ceramic
  • Brake Rotor Type:   Cross Drilled & Slotted
  • Brake Rotor Coating:   Premium G-Coated
  • Rear Brake Rotor Diameter:   12.09 in. (307mm)
  • Kit Includes:
      (1) Rear Ceramic Brake Pad Set
      (2) Rear Performance Brake Rotors
      Brake Pad Contact Point Grease
      Brake Pad Hardware
  • Product Line:   Performance

Premium Positive Molded Brake Pads Features and Benefits

  • Same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims & pad chamfering provide smooth & quite braking
Performance Brake Kit Features and Benefits
  • Longer life - Positive molded to ensure even wear and enhanced performance
  • Less dust - Cleaner, quieter, smoother, includes 3 layer OE-grade shims
  • Better stopping power - Cross-drilled and slotted to reduce brake fade
  • Durable - True non-interference vane design for structural integrity and cooling

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Rear Brakes (0:15)
    • Raise and support vehicle
    • Remove the cotter pin from the pad retaining pin
    • Remove the upper metal anti-rattle clip
    • Remove the lower anti-rattle clip
    • Inspect the parking brake shoes for wear or damage
    • Remove the pad retaining pin
    • Remove the brake pads
    • If the pads are difficult to remove, open the bleeder screw and depress the caliper pistons with a pry bar
    • Depress the pistons all the way
    • Close the bleeder screw
    • Remove the two 17 mm caliper retaining bolts
    • Support the caliper with a caliper hanger
    • Make sure the parking brake is disengaged
    • Remove the brake rotor
  2. step : Replacing the Rear Brakes (9:56)
    • Clean and dry the parking brake shoe and wheel hub area thoroughly
    • Install the rear brake rotor and check for parking brake shoe fit
    • Remove the brake rotor
    • Align the access hole in the wheel hub to the parking brake adjuster
    • Adjust the parking brake shoes as necessary
    • Replace the rotor
    • Remove the caliper from the hanger
    • Clean the inner pad contact surfaces of the brake caliper with a wire brush
    • Install the brake caliper with the two 17 mm retaining bolts
    • Torque the 17 mm bolts to 77 ft-lb
    • Install the brake pads
    • Install the lower anti-rattle clip
    • Install the brake pad retaining pin, and secure it with the cotter pin
    • Install the upper anti-rattle clip
    • Open the bleeder screw to gravity bleed the caliper
    • Close the bleeder screw
    • Replace the wheel
    • Lower the vehicle
    • Torque the lug nuts in a star pattern to 76 ft-lb
    • Check the brake fluid reservoir for proper fill level
    • Refer to cap for brake fluid type if it needs more fluid
    • Test drive the vehicle

Tools needed for replacement:

    General Tools

  • Wire Brush

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Brake Parts Cleaner
  • Anti-Seize Grease

  • Pliers, Cutters & misc Wrenches

  • Pliers
  • Side Cutters

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 17mm Socket
  • 21mm Socket

  • Specialty Tools

  • Brake Caliper Hanger

  • Wrenches - Metric

  • 10mm Wrench

Fits the following Makes:

Year Make Model Description
1998-2005Lexus GS300 Lexus GS300 Rear Ceramic Performance Brake Pad & Rotor Kit
1998-2000Lexus GS400 Lexus GS400 Rear Ceramic Performance Brake Pad & Rotor Kit
2001-2005Lexus GS430 Lexus GS430 Rear Ceramic Performance Brake Pad & Rotor Kit
2001-2005Lexus IS300 Lexus IS300 Rear Ceramic Performance Brake Pad & Rotor Kit
2002-2010Lexus SC430 Lexus SC430 Rear Ceramic Performance Brake Pad & Rotor Kit

Part Interchange

Brand Label Part Number
Raybestos MGD771CH
Raybestos EHT771H
Raybestos SGD771C
Raybestos Brakes MGD771CH
Raybestos Brakes EHT771H
Raybestos Brakes SGD771C

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

TRQ Performance
Brand #: BKA12128
Product Reviews
5.00/ 5.0 1
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
5 stars
August 6, 2020
Ohh I love i.it is smooth and quite.thumps up for the product I bought.
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Are they zinc plated to prevent rust?
October 12, 2020
These rotors will come coated to prevent rusting. Please let us know if you have any questions.
October 13, 2020
Customer service


Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

Lexus GS300 GS400 GS430 IS300 SC430 Rear Ceramic Performance Brake Pad & Rotor Kit TRQ Performance BKA12128-1APBS00110 does not fit your:

Same Day Shipping

Orders ship same day when ordered by 2pm ET. Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Providing you the highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations every day, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos specific to year, make and model guide you step-by-step through your repair.

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.