1APBR00899-Lexus Front Driver & Passenger Side 2 Piece Performance Brake Rotor Set

Replaces

2000 Lexus GS300 Front Driver & Passenger Side 2 Piece Performance Brake Rotor Set

1APBR00899-1347717-2000
Guaranteed to fit: 2000 Lexus GS300

Fit Details

  • Front or Rear Location: Front
  • Side Location: Driver & Passenger Side

Part Details

  • Product Line: Performance
  • Brake Rotor Coating: Premium G-Coated
  • Brake Rotor Type: Cross Drilled & Slotted
  • Wheel Lug Count: 5 Lug
  • Brake Rotor Venting Type: Vented
  • Brake Rotor Diameter: 11.65 in. (296mm)
  • Set Quantity: 2 Piece

This part replaces:

  • TRQ Performance BRA74633
FREE SAME DAY SHIPPING
Part 1APBR00899
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ Performance
Brand #: BRA74633

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools

Part Details

  • Wheel Lug Count:   5 Lug
  • Set Quantity:   2 Piece
  • Brake Rotor Venting Type:   Vented
  • Brake Rotor Type:   Cross Drilled & Slotted
  • Brake Rotor Coating:   Premium G-Coated
  • Brake Rotor Diameter:   11.65 in. (296mm)
  • Product Line:   Performance

True Non-Interference Vane Design

Retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots remove brake dust and expel gasses during hard braking.

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power.

Premium G-Coated

Helps reduce rust and corrosion for a longer-lasting and better looking rotor.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing and Cleaning the Brakes (0:20)
    • Loosen the wheel lug nuts with a 21 mm socket
    • Raise and support the vehicle
    • Remove the brake bleeder cap
    • Open the brake bleeder with an 8 mm wrench
    • Allow a small amount of brake fluid to escape
    • Tighten the bleeder screw
    • Remove the two 14 mm caliper slider bolts
    • Remove the brake caliper and support it with the caliper hanger
    • Remove the brake pad anti-rattle clips
    • Remove the brake pads, using a pry bar and hammer as necessary
    • Loosen the two 17 mm caliper bracket bolts, then remove them
    • Remove the caliper bracket
    • Remove the brake pad tins that are set into the caliper bracket by prying them out
    • Remove the two caliper sliders
    • Clean the caliper sliders and caliper slider holes as necessary
    • Clean the pad tins and surface on the caliper where they mount
    • Apply brake grease to the caliper surface where the pad tins mount
    • Replace the pad tins
    • Apply brake grease to the caliper sliders
    • Replace the caliper sliders and rotate them to spread the grease
    • Remove the brake rotor
    • Clean the wheel hub as necessary
  2. step : Installing the Brakes (31:00)
    • Install the rotor
    • Open the caliper bleeder screw and connect to a drain hose or have a catch pan available
    • Depress the caliper pistons with a brake caliper compressor tool
    • Close the bleeder screw
    • Replace the caliper bracket with the 17 mm mounting bolts
    • Torque the 17 mm bolts to 87 ft-lb
    • Install the brake pads into the caliper bracket
    • Replace the brake pad anti-rattle clips
    • Optionally apply a small amount of brake crease to the brake caliper surfaces that contact the pads for additional sound dampening
    • Replace the brake caliper with the 14 mm caliper bolts
    • Torque the 14 mm caliper bolts to 25 ft-lb
    • Spin the rotor to check for any interference or improper installation
    • Pump the brake pedal slowly to seat the brake pistons against the pads and the pads against the rotor
    • Open the 8 mm bleeder screw to allow fluid to drip until there are no air bubbles
    • Close the bleeder screw
    • Replace the bleeder screw cap
    • Replace the wheel and lug nuts
    • Lower the vehicle
    • Torque the lug nuts in a star pattern to 76 ft-lb

Tools needed for replacement:

    General Tools

  • Hammer
  • Jack Stands
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Brake Parts Cleaner

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • 3/8 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 14mm Socket
  • 17mm Socket
  • 21mm Socket

  • Specialty Tools

  • Brake Caliper Hanger
  • Brake Caliper Compressor Tool. Quad Piston. Ratchet Style.

  • Wrenches - Metric

  • 8mm Wrench
  • 10mm Wrench


Fits the following Makes:

Year Make Model Description
1993-2005Lexus GS300 Lexus GS300 Front Driver & Passenger Side 2 Piece Performance Brake Rotor Set
1998-2000Lexus GS400 Lexus GS400 Front Driver & Passenger Side 2 Piece Performance Brake Rotor Set
2001-2005Lexus GS430 Lexus GS430 Front Driver & Passenger Side 2 Piece Performance Brake Rotor Set
2001-2005Lexus IS300 Lexus IS300 Front Driver & Passenger Side 2 Piece Performance Brake Rotor Set
1993-1994Lexus LS400 Lexus LS400 Front Driver & Passenger Side 2 Piece Performance Brake Rotor Set
2000Lexus SC300 Lexus SC300 Front Driver & Passenger Side 2 Piece Performance Brake Rotor Set
1992-2000Lexus SC400 Lexus SC400 Front Driver & Passenger Side 2 Piece Performance Brake Rotor Set
2002-2010Lexus SC430 Lexus SC430 Front Driver & Passenger Side 2 Piece Performance Brake Rotor Set
FREE SAME DAY SHIPPING
TRQ Performance
Brand #: BRA74633
Product Reviews
5.00/ 5.0
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
0
0
Great part
Thanks!
June 28, 2020
5 stars
The products are good quality.
August 6, 2020
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

Lexus is a registered trademark of Toyota Motor Corporation. 1A Auto is not affiliated with or sponsored by Lexus or Toyota Motor Corporation. See all trademarks.

Lexus Front Driver & Passenger Side 2 Piece Performance Brake Rotor Set TRQ Performance-1APBR00899 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a 2000 Lexus GS300 with these options.