This Jeep Liberty window regulator with Motor is just what you need to get your vehicle in good shape again!

Specifications:

  • RH (Passenger Side) FRONT DOOR
  • Includes the power window motor
  • Replaces dealer part numbers: 55360030AB, 55360030AG, 55360030AH, 55360030AJ, 55360030AM
  • Power operation
  • Built to strict quality control standards
  • Motor assembled to regulator for easier installation

Note: This power window regulator with motor is an updated and improved version and will look different from the original. For an original design replacement, please see our other listings.

This Jeep Liberty window regulator with motor makes a great replacement and has good cost savings over a dealer unit.

Please Note: This window regulator is a high quality aftermarket part that meets or exceeds the performance of the original.  It has been subjected to extensive testing and quality control standards.  That is why we offer this regulator with our superior warranty!

Direct Fit

Direct fit, pre-assembled parts made ready to fit your vehicle and provide easy and trouble-free installation.

Rigorously Tested

Build to strict quality standards

Highest Quality Materials

Made from the highest quality materials for extreme durability and premium performance.

Part Details

  • Operation: Power
  • Regulator Option: with Motor

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (1:09)
    • Pry out the panel behind the door handle
    • Remove the Phillips screws behind the door handle and pull handle
    • Pry out the door panel
    • Lift the door panel up and off
    • Disconnect the latch cables from the door handle
    • Release the lock and master switch harnesses
    • Remove the three Phillips screws around the speaker
    • Pry off the speaker cover
    • Disconnect the speaker wiring lead
    • Remove the water shield
  2. step : Removing the Window Regulator (2:48)
    • Pry out the window clips
    • Lift the window back and out of the regulator
    • Lift and tape the window in place
    • Loosen the three 10mm bolts that hold the regulator
    • Remove the three 10mm bolts from the window motor
    • Disconnect the red clip and harness from the window motor
    • Maneuver the regulator out of the door
  3. step : Servicing the New Window Regulator (4:30)
    • Remove the 10mm bolts from the window motor bracket
    • Replace the 10mm bolts into the new window motor bracket without tightening them
    • Loosen the three 10mm nuts on the window regulator
  4. step : Installing the New Window Regulator (4:59)
    • Feed the window regulator into the door and line up the holes
    • Tighten the three 10mm bolts to the regulator
    • Tighten the three 10mm bolts to the window motor
    • Reconnect the motor harness and red clip
    • Remove the tape from the window
    • Lower the window into the door
    • Line up the studs on the regulator with the window
    • Re-clip the window to the regulator
  5. step : Replacing the Door Panel (6:27)
    • Replace the water shield
    • Reconnect the speaker wiring lead and cover
    • Tighten the three Phillips screws around the speaker
    • Reconnect the latch cables from the door handle
    • Reconnect the lock and master switch harnesses
    • Push and re-clip the door panel
    • Tighten the Phillips screws behind the door handle and pull handle
    • Replace the panel behind the door handle

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

5.0 / 5.0
6 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
6
0
0
0
0
window regulator
WAY BETTER than the orig and 1/3 the price of autozone.
December 3, 2017
Purchased
10 months ago
Great Product!
Fits & works 100% with easy installation. The You-Tube video is a very good reference to look at before buying as well as in the driveway while installing. Very slick.
September 13, 2017
Purchased
10 months ago
Used two and both work great!
I've had the driver side and passenger side regulators go out in my 04 Liberty, and replaced them both with this part. Install was easy with 1aauto's videos, and both are holding up well. Thanks!
August 14, 2017
Purchased
11 months ago
window regulator
With the help of your video and the part conformation that this part would fit my jeep it was realy easy thanks
August 1, 2017
Purchased
1 year ago
window
neighbor loved the regulator because she could put window down
July 31, 2017
Big improvement
The new upgraded window regulator is a much improved design versus the factory original. It was easy to install and
and works great.
July 10, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 6 answers
is the front passenger window regulator the same as the back passenger regulator in a 2004 jeep liberty?
Denise T on Oct 10, 2016
BEST ANSWER: You can find all of the rear for the 04 in the link below.

https://www.1aauto.com/2004-jeep-liberty-window-regulator/y-mo-c/2004-876-16?FrontRearLocation_allQualifierFld=Rear
Will this work for 2007 jeep liberty front passenger door?
Jess M on Mar 17, 2016
BEST ANSWER: No, I believe the part you want is 1AWRG02079 - If you ever have any questions to ensure you found the correct part you can always call them during their listed business hours, their customer service staff are excellent!

Vehicle Fit

  • 2002-2005 Jeep Liberty Front Upgrade Power Window Regulator with Motor Passenger Side
  • 2006 Jeep Liberty (Built Before 2/26/06 Production Date) Front Upgrade Power Window Regulator with Motor Passenger Side

This part replaces:

  • Hollander 125-02041R
  • OE # 55360030AM
  • Dorman 741-527
Part #: 1AWRG01251

How-to Video:

(08:11 min)