This replacement Jeep Liberty tail light is just what you need to get your Jeep in good looking form again!

This tail light features:

  • Right Hand (Passenger side)
  • Replaces dealer Part Numbers: 55157060AC, 55157060AD, 55157060AE
  • Mounts on 1/4 panel
  • Assembly includes lens and housing
  • Department of Transportation (DOT) & Society of Automotive Engineers (SAE) approved
  • Direct replacement
  • Not correct for tail lights with tail lamp guards
  • Built to strict quality control standards
  • Bulbs and wiring not included

This Jeep Liberty tail light makes a great replacement and has good cost savings over a dealer unit.

 

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Light uses same wiring as the original assembly, providing easy, trouble-free installation.  No cutting or splicing required.

DOT and SAE Compliant

DOT & SAE compliant: meets federal regulations for on-road use

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Remove the tail light assembly (0:38)
    • Remove the two T20 Torx bolts
    • Firmly pull the tail light assembly out.
    • If all you need are new bulbs, disconnect them and replace them and continue to step 2.
    • Disconnect the wiring harness lead and unclip the wiring from the back of the assembly.
    • Transfer the bulbs to the new assembly, or install new bulbs into the new assembly.
  2. Open the tailgate and use a socket extension and Torx bit to access the driver's side Torx bolts.

  3. step : Install the tail light assembly (1:35)
    • Connect the wiring harness if you disconnected it.
    • Line up the pins and clip the tail light into the vehicle.
    • Secure with your T20 Torx Drivers.

Tools needed for replacement:

    Torx Drivers & Sockets

  • T20 Torx Driver

4.5 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
1
0
0
0
Right Part at Great Price
Needed right tail light assembly for 2006 jeep liberty. Came earlier than expected and fit perfectly. Even had new bulbs already installed which was a very pleasant surprise.
December 28, 2017
Purchased
4 months ago
jeep liberty tail light
I was a bit disappointed that it was imported, but that's the way it is these days. The wiring was different from OEM, but it appears to work fine. Nice touch including the bulbs.
September 20, 2017
Purchased
7 months ago
Response from 1A Auto
Hello, Thank you for your positive feedback, but based on your comment we felt we needed to contact you. Any bulbs that arrive inside of one of our assemblies is a test bulbs only. We put in our listing: "Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly." Thank you for your purchase!
September 20, 2017
Andrew PStaff
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2005-2006 Jeep Liberty Tail Light Passenger Side without Tail Lamp Guard
  • 2007 Jeep Liberty Tail Light Passenger Side without Tail Lamp Guard

This part replaces:

  • Partslink CH2801158
  • Hollander 166-02215AR
  • OE # 55157060AC AD AE
  • TYC 11-5885-91-1
  • DEPO 333-1932R-AF-CR
Part #: 1ALTL00580

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(03:01 min)