This replacement tail light is just what you need to get your Jeep Grand Cherokee in good looking form again!

This tail light features the following specifications:

  • RH (Passenger Side)
  • Direct bolt on
  • Replaces dealer part number: 5101896AB
  • Direct replacement
  • Injection molded plastic
  • Department of Transportation (DOT) and Society of Automotive Engineers (SAE) approved
  • Fits Grand Cherokee vehicles 1999 thru production date of 10/31/02
  • Bulbs & bulb sockets are not included

*Note: For 2002 models you can find the production date of your vehicle on either the outer edge of the driver's front door or on the latch piller that the door closes on.

We have noticed that there are many inferior quality Tail lights on the market. We have researched other tail light manufacturers and are only selling what we believe to be the highest quality, best fitting, aftermarket tail lights available. So don't be fooled by cheaper made imitation Tail lights. Go with superior quality!

This Jeep Grand Cherokee tail light makes a great replacement and has good cost savings over a dealer unit.

 

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Part Details

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Removing the Tail Light (0:36)
    • Remove the two Phillips screws from the tail light.
    • Pull the taillight forward.
    • Disconnect the connector on the back of the light.
  2. step : Changing the Bulbs (1:12)
    • Turn the caps to unlock and pull the bulbs free.
  3. step : Replacing the Tail Light (1:46)
    • Reconnect the harness to the light.
    • Line the taillight up and push it into place.
    • Replace the two Phillips screws.

Tools needed for replacement:

    Screwdrivers & Related

  • Phillips Head Screwdriver

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Great Company!
Great company to deal with, and over the top customer service! They spent extra time with me on the phone explaining the lens assembly so I could decide whether or not I needed a circuit board or lamp socket. In addition the video they have on replacing the lens was extremely helpful. The item was very nicely packaged, and arrived quickly. Would definitely buy auto parts from them again in the future!
September 3, 2017
Purchased
12 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
1999-2002Jeep Grand Cherokee Jeep Grand Cherokee Tail Light Passenger Side
2003Jeep Grand Cherokee Jeep Grand Cherokee (Built Before 11/02 Production Date) Tail Light Passenger Side

This part replaces:

  • Partslink CH2801138
  • Hollander 166-1788R
  • OE # 55155138AB
  • TYC 11-5275-00-1
  • DEPO 333-1925R-US
Part #: 1ALTL00125


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(03:17 min)