Jeep Grand Cherokee Tail Light & Socket Set Pair - 1ALTP00582

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Quantity:   Pair

This replacement Jeep Grand Cherokee Tail Light & Socket Set is just what you need to get your Jeep in good looking form again!


  • Includes:
    • (1) LH (Driver Side) Tail light
    • (1) RH (Passenger Side) Tail light
    • (6) Tail light Bulb Sockets
  • Replaces dealer part number: 5101896AB, 5101897AB, 4676589 (6)
  • Direct replacements
  • Injection molded plastic light assemblies
  • Department of Transportation (DOT) and Society of Automotive Engineers (SAE) approved
  • Fit Grand Cherokee vehicles 1999 thru production date of 10/31/02
  • Bulbs are not included

*Note: For 2002 models you can find the production date of your vehicle on either the outer edge of the driver's front door or on the latch piller that the door closes on.

We have noticed that there are many inferior quality Tail lights on the market. We have researched other tail light manufacturers and are only selling what we believe to be the highest quality, best fitting, aftermarket tail lights available. So don't be fooled by cheaper made imitation Tail lights. Go with superior quality!

This Jeep Grand Cherokee tail light & socket set makes a great replacement and has good cost savings over a dealer unit.


Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm -

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Tail Light (0:36)
    • Remove the two Phillips screws from the tail light.
    • Pull the taillight forward.
    • Disconnect the connector on the back of the light.
  2. step : Changing the Bulbs (1:12)
    • Turn the caps to unlock and pull the bulbs free.
  3. step : Replacing the Tail Light (1:46)
    • Reconnect the harness to the light.
    • Line the taillight up and push it into place.
    • Replace the two Phillips screws.

Tools needed for replacement:

    Screwdrivers & Related

  • Phillips Head Screwdriver

4.12/ 5.0
8 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Same defect as OE
Hi, I had to replace tail lights because of the pressure of the water tight bulb holder pushing in on the plastic contacts push down on them eventually disconnecting the contacts and lights not working. The problem is there is a space between the contact holder and the interior of the tail light. So even these new tail lights have the same spacer, again pushing the plastic contact holders down and disconnecting them from the bulb holder. Not 1Aautos fault, but manufacture. I had to fill in the spacer with a hard plastic to keep the contacts connected.
January 21, 2017
Perfect fit!
Exact fit for my make and model. Great price as well.
January 21, 2017
Tail Lights
I have been very well pleased so far with the performance & fitting of them. Well Pleased
March 8, 2017
Great for money
Easy install no issues. Nice amd bright. Durable, shipped and packaged well.
June 25, 2017
to all .... perfect fit .... the old ones just simply disintegrated where the light-bulb unit attached --- so there was no ground ..... will deal with these folks again - well packed - in individual boxes, secure with both boxes in an outside shipping box, timely & prompt shipping and well tracked ==== keep up the good work
January 30, 2018
Best part website of 2018
I ordered new lights new rear light and now my 2001 Jeep Laredo looks clean new lights very brighter shiny very recommend to family
April 17, 2018
Tail light and socket jeep Grd Cke
One of the plastic hold downs broke off when removed from packaging because it was caught in the bubble wrap. Could not get lights to work and kept blowing the fuse. Finally took to Jeep dealer and found one of the sockets and panels were shorting. Replaced with the original panels.
September 3, 2018
No problems
Shipping was faster than expected. I got the correct parts cheaper than anywhere else I looked. Parts fit and work great.
December 7, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Does it include the circuit board?
Dan P February 16, 2016
Yes it does! Its a great item from A1! Very happy with mine and Im sure you will be too!
Leo J February 16, 2016
Yes. It includes everything you need to do a total replacement
Mike S February 16, 2016
Yes they have the circuit boards attached.
Brian F February 17, 2016
It is the complete tail light assembly for both sides, so yes
Edward H February 17, 2016
Don C December 30, 2017
A N December 7, 2018
Year Make Model Description
1999-2002Jeep Grand Cherokee Jeep Grand Cherokee Tail Light & Socket Set Pair
2003Jeep Grand Cherokee Jeep Grand Cherokee Tail Light & Socket Set Pair (Built Before 11/02 Production Date)
Part #: 1ALTP00582

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(03:17 min)