Replaces

Jeep Grand Cherokee Liberty Rear Exterior Door Handle Pair

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A

Part Details

  • Color:   Black
  • Quantity:   Pair
  • Finish:   Textured

These replacement exterior door handles are just what you need to get your vehicle in good working form again!

Specifications:

  • Comes as a PAIR
    • LH (Driver Side) and RH (Passenger Side) Rear doors
  • Replaces dealer part numbers: 55135838AC, 55135838AD, 55135839AD
  • Injection molded black plastic
  • Durable construction
  • Direct replacement for original handle

This exterior door handle pair is a direct bolt on and is built to strict quality control standards. It is a great replacement and has substantial cost savings over the dealer units.

Item Condition: New

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : Removing the Door Panel (0:52)
    • Pry off the trim piece inside the door handle with a flat blade screwdriver
    • Remove the Phillips head screw inside the door handle
    • Remove the Phillips head screw inside the door pull
    • Pry out the door panel clips
    • Lift the door panel up and off
    • Disconnect the door handle rod from the door handle
    • Remove the three Phillips head screws from the speaker
    • Disconnect the speaker wiring lead
    • Pull off the speaker
    • Carefully peel off the water shield
  2. step : Removing the Door Handle (2:08)
    • Push the clip off the door handle rod
    • Pull the door handle rod back and out
    • Remove the two 10mm nuts behind the door handle
    • Pull the handle out from the exterior
  3. step : Installing the Door Handle (2:49)
    • Put the new gasket in place on the new door handle
    • Push the door handle into place from the exterior
    • Replace the two 10mm nuts behind the door handle
    • Push the door handle rod in
    • Push in the clip on the door handle rod
  4. step : Reinstalling the Door Panel (3:38)
    • Put the water shield into place
    • Connect the speaker wiring lead
    • Put the speaker into place
    • Insert the three 10mm bolts into the speaker
    • Connect the latch cables to the door handle
    • Lift the door panel into place
    • Push in the door panel clips
    • Insert the Phillips screw into the door pull
    • Insert the Phillips screw into the door handle
    • Push on the trim piece inside the door handle

Tools needed for replacement:

    General Tools

  • Putty Knife

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

There are no reviews for this item.
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
1999-2004Jeep Grand Cherokee Jeep Grand Cherokee Rear Textured Black Exterior Door Handle Pair
2002-2007Jeep Liberty Jeep Liberty Rear Textured Black Exterior Door Handle Pair
Only 9 left in stock
Part 1ADHS01307
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.