Replaces

Jeep Grand Cherokee Liberty Rear Front Drive Shaft CV Joint Rebuild Kit

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A

This CV Joint Repair Kit is just what you need to get your Jeep vehicle running great again! This kit includes the necessary parts to rebuild the rear joint of the front (propeller) shaft. If your experiencing drivetrain vibration and / or noise, then this rebuild kit may be for you!

Specifications:

  • Set Includes:
    • (1) Joint assembly
    • (1) shaft flange
    • (1) Dust cover
    • (6) Bolts
    • (1) C clip
    • (1) Boot
    • (1) Boot clamp
  • Replaces the REAR CV joint of the Front Driveshaft
  • Replaces many dealer part numbers including: 52105884AA, 52099498AD, 520994
  • Direct replacements
  • Built to strict quality control standards

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : Removing the Driveshaft (0:43)
    • Remove the 8mm bolts from the front of the driveshaft
    • Break the front of the driveshaft free with a hammer and a flat blade screwdriver
    • Have an assistant hold the driveshaft, or brace it in place
    • Remove the 8mm bolts from the rear of the driveshaft
    • Break the rear of the driveshaft free with a hammer and a flat blade screwdriver
    • Pull out the driveshaft
  2. step : Removing the CV Joint (2:16)
    • Pry off the larger CV joint boot clamp clip with a hammer and screwdriver
    • Pry off the smaller CV joint boot clamp clip with a hammer and screwdriver
    • Cut off the boot with a razor blade
    • Pry the top off the CV joint with a flat blade screwdriver and a hammer
    • Pull off the CV joint housing
    • Clean the driveshaft with a cloth rag
    • Pull off the CV joint clip with snap ring pliers
    • Use a hammer to remove the CV joint from the driveshaft
  3. step : Constructing the New CV Joint (4:10)
    • Slide the new boot onto the driveshaft
    • Slide on the smaller boot clamp
    • Slide on the larger boot clamp
    • Slide on the bottom of the CV joint housing
    • Slide on the CV joint
    • Carefully hammer the CV joint into place
    • Insert the clip into the CV joint with the snap ring pliers
    • Apply grease to the CV joint
    • Thread the bolts through the top of the CV joint housing
    • Push the top into place, using the bolts to line it up
    • Hammer the CV joint housing together
    • Thread the bolts out of the CV joint
    • Tighten the boot clamps with a pair of pliers
    • Bend the clamps into their clips
    • Cut off the extra material with wire cutters
  4. step : Reinstalling the Driveshaft (7:01)
    • Feed the driveshaft into place
    • Push the front of the driveshaft into place
    • Push the rear of the driveshaft into place
    • Have an assistant hold the wheel, or brace the wheel, to keep the driveshaft from turning
    • Insert the 6mm Allen bolts at the front of the driveshaft
    • Tighten the 6mm Allen bolts to between 12 - 14 foot-pounds of torque
    • Insert the 8mm bolts at the rear of the driveshaft

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands
  • Razor Blade / Gasket Scraper
  • Assistant

  • Hex Wrenches

  • 6mm Allen Wrench

  • Materials, Fluids, and Supplies

  • Cloth Rags

  • Pliers, Cutters & misc Wrenches

  • Wire Cutters
  • Slip-Joint Pliers
  • Channel-Lock Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 8mm Socket

4.40/ 5.0
20 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
14
2
3
0
1
Fast delivery and easy install
1aauto delivered this part in two business days. My 14 year old son and I dropped the front driveshaft, replaced the rear cv and reinstalled in 2 hours. It was really quite easy to do! My local shop quoted $600 to replace with new driveshaft because apparently a cv cant be rebuilt. Thanks to 1a for a great price on this rebuild kit ($56) and YouTube for great how to videos.
August 5, 2016
2006 Jeep Liberty
Overall I was happy with this kit, my one complaint is that the new split ring was too large. However, the old one I had was in fine condition which made it a non issue.
March 18, 2017
Good part but did not fit perfectly
Good part and it fixed the problem however I had to modify it slightly to get the snap ring to fit on the shaft. Had to grind the backside of the CV joint surface to get the snap ring to seat. And also the snap ring that was provided was to big. Had to use the old one
March 19, 2017
Description
I own a 2004 grand cherokee, it worked. I might go some place else next time this is the second thing I ordered from this site that was not correct.
June 5, 2017
It works
It fits my 04 jeep Grand Cherokee. Way easier to rebuild my c.f. joint than expected. My only complaint about this is that the fouls that came with it do not fit my jeep at all. Other than that good product.
July 18, 2017
Drive Shaft CV joint
Right part, fast delivery...Awesome service, love these guys
August 21, 2017
Jeep part
I was very pleased with the part ,it came on time and fix with no issues ??
August 25, 2018
cv joint is junk
CV joint fit properly and went on with out a hitch--but FAILED within 24 hours and at highway speed!!!! When I got the Jeep home and pulled the front driveshaft, I removed the CV joint and the cage that holds the ball bearings against the inner race was cracked in two places.
September 15, 2018
Parts
Best deal out there and fit perfect.you want go wrong with this.
October 23, 2018
Got a faulty part but after emailing was sent a replacement free of charge and is working great now will definitely be ordering from 1aauto in the future
November 28, 2018
perfect fit
part fit great -- great price - all is good :-) will buy from you in the future when needed
November 29, 2018
Similar part
Used on a 2006 Jeep Grand Cherokee, spent two hours filing the shaft because the inside length of the spline area was longer by three thicknesses of the snap ring. Luckily for the price it was worth it, I guess.
December 30, 2018
Great customer service
I ordered the wrong part. My fault not 1aautos. They took care of it 100% and I highly recommend them. 1aauto will be my first choice from now on. Ive already ordered more parts from them. Excellent service
April 14, 2019
Good product, fast delivery
Recieved what I ordered, fast!
June 16, 2019
Mystery vibration gone
Easy rebuild1.5 hours on the floor from start to finish.
July 21, 2019
Exactly what we needed! No issues whatsoever! Will definitely use your company again!
November 23, 2019
Worked perfectly
The parts fit perfectly and made my 4x4 nice and quiet again...parts arrived in just a couple of days very happy
December 25, 2019
jeep drive shaft cv joint
fit and worked perfect
December 27, 2019
Correct part
Easy to order. Received the correct part that was easy to replace with the help of how to video from 1A auto.
January 26, 2020
Best place for online shopping always on time part is always correct and the price is great love this place if you can wait on the time and brings is way better than auto parts store
February 17, 2020
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
I dont see the large rubber boot that covers the drive shaft just before cvjoint flange boot?
Ronald W October 8, 2018
This part is not included. Thank you.
Andra M October 8, 2018
Does this kit fit a 2000 jeep grand cherokee laredo 4.0?
Homer G August 15, 2019
Thank you for your inquiry. This will be the correct kit for that vehicle, for the rear CV joint of the front driveshaft. Please contact us if you have any further questions.
Anthony C August 15, 2019
? Do you ship to new zealand
Matt C October 15, 2019
Matt, Thank you for your inquiry! No, we do not currently ship outside of the US and Canada. Please let us know if you have any further questions, thank you.
Jessica D October 15, 2019
Will this work for a Larado model ?
Darin M February 5, 2020
Yes, according to the information you provided, this part will fit your vehicle as long as your year, make and model are also in the fit list. Please let us know if you have any other questions!
Tim K February 5, 2020
Yes it will it worked on mine and it was a Larado
Jack J February 5, 2020
Yes it was a direct bolt in on my 2004 grand Cherokee Laredo
Joseph S February 6, 2020

Fits the following Makes:

Year Make Model Description
1999-2006Jeep Grand Cherokee Jeep Grand Cherokee Rear Front Drive Shaft CV Joint Rebuild Kit
2002-2007Jeep Liberty Jeep Liberty Rear Front Drive Shaft CV Joint Rebuild Kit
Part 1ATRX00016
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.