1ADMK00011-Jeep Grand Cherokee Liberty Front Drive Shaft CV Joint Rebuild Kit 2 Piece Set

Replaces

Jeep Grand Cherokee Liberty Front Drive Shaft CV Joint Rebuild Kit 2 Piece Set TRQ CRA80100

1ADMK00011
FREE SAME DAY SHIPPING
Save 2%
List: $97.95 Save: $2.00
Part 1ADMK00011
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: CRA80100

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools

Part Details

  • Quantity:   2 Piece Set

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Driveshaft (0:43)
    • Remove the 8mm bolts from the front of the driveshaft
    • Break the front of the driveshaft free with a hammer and a flat blade screwdriver
    • Have an assistant hold the driveshaft, or brace it in place
    • Remove the 8mm bolts from the rear of the driveshaft
    • Break the rear of the driveshaft free with a hammer and a flat blade screwdriver
    • Pull out the driveshaft
  2. step : Removing the CV Joint (2:16)
    • Pry off the larger CV joint boot clamp clip with a hammer and screwdriver
    • Pry off the smaller CV joint boot clamp clip with a hammer and screwdriver
    • Cut off the boot with a razor blade
    • Pry the top off the CV joint with a flat blade screwdriver and a hammer
    • Pull off the CV joint housing
    • Clean the driveshaft with a cloth rag
    • Pull off the CV joint clip with snap ring pliers
    • Use a hammer to remove the CV joint from the driveshaft
  3. step : Constructing the New CV Joint (4:10)
    • Slide the new boot onto the driveshaft
    • Slide on the smaller boot clamp
    • Slide on the larger boot clamp
    • Slide on the bottom of the CV joint housing
    • Slide on the CV joint
    • Carefully hammer the CV joint into place
    • Insert the clip into the CV joint with the snap ring pliers
    • Apply grease to the CV joint
    • Thread the bolts through the top of the CV joint housing
    • Push the top into place, using the bolts to line it up
    • Hammer the CV joint housing together
    • Thread the bolts out of the CV joint
    • Tighten the boot clamps with a pair of pliers
    • Bend the clamps into their clips
    • Cut off the extra material with wire cutters
  4. step : Reinstalling the Driveshaft (7:01)
    • Feed the driveshaft into place
    • Push the front of the driveshaft into place
    • Push the rear of the driveshaft into place
    • Have an assistant hold the wheel, or brace the wheel, to keep the driveshaft from turning
    • Insert the 6mm Allen bolts at the front of the driveshaft
    • Tighten the 6mm Allen bolts to between 12 - 14 foot-pounds of torque
    • Insert the 8mm bolts at the rear of the driveshaft

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands
  • Razor Blade / Gasket Scraper
  • Assistant

  • Hex Wrenches

  • 6mm Allen Wrench

  • Materials, Fluids, and Supplies

  • Cloth Rags

  • Pliers, Cutters & misc Wrenches

  • Wire Cutters
  • Slip-Joint Pliers
  • Channel-Lock Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 8mm Socket


Fits the following Makes:

Year Make Model Description
1999-2004Jeep Grand Cherokee Jeep Grand Cherokee QUADRA-DRIVE 4WD System Front Drive Shaft CV Joint Rebuild Kit 2 Piece Set
2002-2007Jeep Liberty Jeep Liberty Front Drive Shaft CV Joint Rebuild Kit 2 Piece Set

Part Interchange

Brand Label Part Number
DIY Solutions ADS00217
DIY Solutions ADS00297
DIY Solutions ADS00299

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
TRQ
Brand #: CRA80100
Product Reviews
4.64/ 5.0 11
11 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
8
2
1
0
0
propellor shaft rebuild kit
January 22, 2017
product arrived on time, was as advertised and everything worked except the circlip retainer was the wrong size had to use the old one
Good, but not pefect
February 9, 2017
Both snap rings were the wrong size so I had to go buy new ones. The front cv joint was 1-2 mm too long so I had to use dremel tool to scribe new groove to get to fit properly. Also, I decided to reuse old bolts because New bolts were much softer metal. Took 4hrs longer to swap out parts due to difference in original parts and replacement parts. But seems to be economicall option if you have time and deep toolbox.
Liberty rebuild kit
December 19, 2017
This kit is a great way to save bucks on your Liberty when a CV goes bad on the intermediate shaft. The dealership only sells the shaft as a complete unit and says the cv joints are not serviceable. I ordered the kit and it came quickly. Only my rear joint was bad. It went together like a dream. When I went to change the front joint, something was amiss with the kit I received. a quick email to 1aAuto and a replacement kit was on the way. I installed the replacement a few days later and the Jeep is back on the road! Thanks 1aAuto.com for a great deal on these parts!
2003 Jeep Liberty.
January 10, 2018
The parts were a direct replacement and have not had any issues!
Excellent Customer Service and Product Delivery
April 24, 2018
A1 stands by there name and customer service. I was very pleased with the service and the product I received. I would order from A1 again.
Quality
December 31, 2018
Highly recommend this kit. The price was right at about a third of the cost of a new shaft. The parts fit perfect and the kit was complete. I especially liked the link to the video that showed how to tear down the old shaft and assemble with new parts. Fast shipping was a bonus on this purchase. Highly recommended.
Jeep Front Drive Shaft rebuild kit worked like a charm
April 25, 2019
It got here fast. It fit perfectly. The tech support was awesome. The instructional video was right on. And, it was cheaper than anywhere else. What's not to like? Will buy here again.
Liberty driveshaft CV
December 20, 2019
My Jeep Liberty had a bad CV on it's front driveshaft. I could only find complete driveshafts for sale they were $300 to $800. I found 1A auto parts by accident and I was able to buy just the CV joints for $96. Saved me a chunk of money. Parts were delivered in days,in fact I believe they got it here earlier than promised. Appears to be good quality, no problems.
February 27, 2020
Good kit. I wish the bolts were like the factory stock. The socket heads are easy to round out.
2005 Jeep Liberty 3.7 4WD
May 10, 2020
Received in a timely manner. The video was the most helpful with the installation of this part. The only thing we weren't sure about and the video didn't call out either was the direction that the bearing goes. I was able to slow down the video and confirmed the direction, but we weren't sure if it mattered or not. It's installed and so far it's working great. I would recommend buying this part and it was the best price we found anywhere! We actually decided to buy the kit instead of the obvious front end of the shaft that was broken. We discovered the other end was also worn out too.
Drive shaft joints
July 28, 2020
Came as expected quality part.
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
What typenof grease comes with this rebuild? Black lithium?
December 2, 2018
10
I can’t say 100% that’s what it was, since I bought this kit and did the repair well over a year ago, but I recall it was black. I do wish it came with a little more though. I wasn’t able to put as much in each spot as I would like.
December 3, 2018
10
Yes
December 4, 2018
This kit says it includes parts for both front and rear joints, but all the instructions and videos only discuss the front. Is rebuilding the rear joint pretty much the same?
January 7, 2019
10
The rear joint should have a very similar installation to the front. If you require any assistance please let us know!
January 8, 2019
in a 2004 jeep liberty 4x4 will the front driveshaft on make noise in 4wd if its bad or going bad?
June 7, 2019
10
While we cannot diagnose your problem, this does sound like it is a possible issue that is causing the noise that you are experiencing. We would recommend taking this and getting a diagnosis to ensure you get the rights parts to fix the issue rather than replacing items that dont need replacing.
June 8, 2019
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


Jeep Grand Cherokee Liberty Front Drive Shaft CV Joint Rebuild Kit 2 Piece Set TRQ CRA80100-1ADMK00011 does not fit your:




Same Day Shipping

Orders ship same day when ordered by 2pm ET. Need your part faster? Choose expedited shipping at checkout.


Guaranteed To Fit

Providing you the highest quality, direct fit replacement auto parts enforced to the strictest product standards.


USA Customer Support

Exceeding customers' expectations every day, our team of passionate auto enthusiasts are here to help.


Instructional Video Library

Thousands of how-to auto repair videos specific to year, make and model guide you step-by-step through your repair.

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.