1APBS00356-Jeep Grand Cherokee Front Semi-Metallic Performance Brake Pad & Rotor Kit

Replaces

Jeep Grand Cherokee Front Semi-Metallic Performance Brake Pad & Rotor Kit

1APBS00356

Part Details

  • Brake Pad Bonding Type: Premium Posi
  • Brake Rotor Type: Cross Drilled & Slotted
  • Brake Pad Friction Material: Semi-Metallic
  • Kit Includes: (1) Front Semi-Metallic Brake Pad Set
  • Kit Includes: (2) Front Performance Brake Rotors
  • Front Brake Rotor Diameter: 12.01 in. (305mm)
  • Front Brake Rotor Venting Type: Vented
  • Wheel Lug Count: 5 Lug
  • Product Line: Performance
FREE SAME DAY SHIPPING
Save 39%
List: $147.95 Save: $58.00
Part 1APBS00356
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

DIY Solutions
Brand #: BFS04455

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Part Details

  • Brake Pad Bonding Type:   Premium Posi
  • Wheel Lug Count:   5 Lug
  • Brake Pad Friction Material:   Semi-Metallic
  • Brake Rotor Type:   Cross Drilled & Slotted
  • Front Brake Rotor Diameter:   12.01 in. (305mm)
  • Front Brake Rotor Venting Type:   Vented
  • Kit Includes:
      (1) Front Semi-Metallic Brake Pad Set
      (2) Front Performance Brake Rotors
  • Product Line:   Performance

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quite braking
Positive Mold Technology

Improves durability and performance by allowing for even wear. Eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

Reduces noise and vibration

Environmentally Compliant

Meets the Better Brake Law standards

True Non-Interference Vane Design

Retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots remove brake dust and expel gasses during hard braking.

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Wheel (1:19)
    • Loosen the lug nut covers with a 19mm socket
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (1:43)
    • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
    • Remove 1bolts from the brake caliper with an 11/16 socket
    • Pull the caliper aside
    • Pry out the pins from the brake pads
    • Pry the brake pads off with a flat blade screwdriver
    • Unclip the ABS sensor wiring harness
    • Remove 3/4 inch bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Remove the Phillips screws from the rotor
    • Pull the rotor off
    • If the rotor will not pull off, thread some bolts into the slot on the rotor, and tighten them to loosen the rotor
  3. step : Installing the New Brake Rotor and Brake Pads (5:48)
    • Clean off the hub with a wire brush
    • Slide the rotor on
    • Clean both sides of the rotor with brakes parts cleaner
    • Thread on one lug nut to hold the rotor in place
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Apply grease to the caliper slide bolts
    • Clean the caliper bracket and brake pad slides with a wire brush
    • Put the bracket back into place
    • Start the bolts by hand
    • Tighten the bolts to 85 foot-pounds of torque
    • Apply grease to the brake pad tabs
    • Install the new brake pads into the bracket
    • Put the caliper on
    • Thread bolts by hand
    • Secure the caliper slide pin with locking pliers
    • Tighten bolts to 20 foot-pounds
    • Remove the lug nut
  4. step : Reattaching the Wheel (10:53)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the 19mm lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
  5. step : Testing the Brakes (11:18)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Hammer
  • Jack Stands
  • Wire Brush
  • Floor Jack

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - SAE

  • 3/4 Inch Socket
  • 11/16 Inch Socket

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
1999-2002Jeep Grand Cherokee Jeep Grand Cherokee with Akebono Calipers Front Semi-Metallic Performance Brake Pad & Rotor Kit
2003-2004Jeep Grand Cherokee Jeep Grand Cherokee Front Semi-Metallic Performance Brake Pad & Rotor Kit

Part Interchange

Brand Label Part Number
Aimco 5118
Bendix PRT5254
DuraGo BR5118
Raybestos EHT945H
Raybestos SP945TRH
Raybestos PGD945M
Raybestos SGD945M
Raybestos Brakes SP945TRH
Raybestos Brakes PGD945M
Raybestos Brakes SGD945M
Raybestos Brakes EHT945H
Raybestos Brakes 76793
Wagner BD125693

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
DIY Solutions
Brand #: BFS04455
Product Reviews
There are no reviews for this item.
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


Jeep Grand Cherokee Front Semi-Metallic Performance Brake Pad & Rotor Kit-1APBS00356 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.