1ADSH00057-Jeep Grand Cherokee Front Driveshaft


2000 Jeep Grand Cherokee V8 4.7L 20 Inch (weld to weld) Prop Shaft Length with CV Joint Style Drive Shaft Front Driveshaft

Guaranteed to fit: 2000 Jeep Grand Cherokee

Fit Details

  • Front or Rear Location: Front
  • Engine Displacement (Metric): V8 4.7L
  • Vehicle Drive Shaft Option: with CV Joint Style Drive Shaft
  • Vehicle Drive Shaft Length: 20 Inch (weld to weld) Prop Shaft Length

Part Details

This part replaces:

  • Hollander 430-00471
  • OE # 52099498AB
  • OE # 52099498AD
  • A1 Cardone 65-9314
  • Dorman 938-143
Save 4%
List: $137.95 Save: $6.00
Part 1ADSH00057
In Stock

Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Brand #: DSA86532
Vehicle Fit
Warranty & Shipping

Highest Quality Materials

Made from highest quality materials that meet or exceed OEM standards

Direct Fit Replacement

Direct fit replacement part guaranteed to fit and function properly for your specific application

Quality Tested

Quality tested and built to a strict level of product standards

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Does this shaft come with the bolts?
Bryan S December 15, 2017
No. It does not come with the bolts.
L I December 15, 2017
No but it fits peefect
Harry L December 15, 2017
No, keep your old ones
Jason K December 15, 2017
Mine did not
F R December 15, 2017
No this driveshaft does not come with new hardware (bolts).
Jeffrey B December 15, 2017
Called my mechanic, he said the replacement drive shaft did not come with bolts, he used the old bolts. I believe they were standard bolts, shaft worked fine.
Ed L December 15, 2017
Bolts are not included. You may reuse the existing bolts or purchase from a separate vendor.
Alex P December 15, 2017
Is this a rebuilt drive shaft and has anyone had a Problem with drive shaft vibration ?
Kenneth H January 5, 2018
Thanks for your question! This is a brand new part. Thanks!
Adam G January 5, 2018
Ive had no problems with it no vibrations
Richard H July 5, 2018
What is the warranty on this product lifetime or 60 days ?
Kenneth H January 5, 2018
Thanks for your question! These items have a lifetime warranty on them for vehicle with a factory suspension. Thanks!
Adam G January 5, 2018
Will this driveshaft fit 2000 Jeep Grand Cherokee Limited 4.7 V8 with Quadra-Drive?
Kenneth H January 7, 2018
Thanks for your question! This will only fit on vehicles with the CV style shaft installed at the factory that measures 20" from weld to weld. Thanks!
Adam G January 8, 2018
Harry L August 6, 2018
Why wouldnt this fit the 4.o motor jeep?
Lindo S August 6, 2018
This part is listed to fit the 4.7L model, not the 4.0L model, due to vehicle design differences.
Peter L August 6, 2018
I am almost sure that the length is not the same .
A N August 6, 2018
Is your jeep select drive or quadra drive ?
L I August 6, 2018
It may have a different transfer case. Here are the different transfer cases: nv-247 and the nv-242. The Nv-247 is paired with the quadra-trac 11 and the quadra drive which are full time 4wd systems. It also uses the cv type drive shaft. I do not think there is a difference in drive shaft with the 4.0 and 4.7 if it uses the nv 247 transfer case. It may differ with Select-trac which is paired with the nv242 4wd system. 4.0 uses the 242LD and the 4.7 uses the 242HD. I would recommend doing some research first.
J U August 6, 2018
This driveshaft has a specific length for a "quadra-drive" t-case and V8. The 4.0 shaft may be different length and may also have different couplers ie: Rzeppa / U-joint / etc. Unfortunately WJs have several different driveshaft setups.
Night Hawk 1 N August 6, 2018
There are two different styles one has u joints the other has cv joints
Harry L August 6, 2018
Length is different due to the location of transfer case in relation to the front differential. 6 cylinder 4.0 is longer than the 4.7 V8, so the transfer case sits farther back in the vehicle.
Hoseman240 H August 6, 2018
We have the 4.7 V8 it was to long and could not switch the end cuz ours has the fine splins
Dave D September 17, 2018
Will this shaft work with the Quadra Drive system?
Willie B February 24, 2020
Yes, quadradrive is inside the differential. Only thing that matters on the drive shaft is that you match the proper yoke to your jeep. Either CV style or repezza U joint.
N O February 24, 2020
I had a 2000 quadra 4.7l and worked fine.
J U February 24, 2020
J A February 24, 2020
Thank you for your inquiry! The fit of this specific product is not dependent on if the vehicle is or is not equipped with the Quadra Drive system. In order to confirm the fit of these parts you would need to know the engine size, the length of the OE shaft from weld to weld, as well as if the OE shaft was a CV joint style or U-Joint style. This particular product is specific to models with a V8 4.7L engine, has a 20 Inch measurement (weld to weld) and is also the CV Joint Style Design. Please let us know if you have any further questions, thank you.
Jessica D February 24, 2020
What is the overall length of drive shaft?
Robert F April 7, 2020
The measurement from weld to weld is 20 inches.
Corey M April 7, 2020
What is the overall length? 35" or 34 1/2 inches?
Blazedpud B April 14, 2020
Thank you for your inquiry. Actual Measurements are not listed or available. Our parts are exact replacements for your vehicles OEM parts. As long as your year, make, and model match up with our listing, these parts will directly fit and function like the originals. Please let us know if you have any other questions. Thank you!.
Tim K April 14, 2020

Fits the following Makes:

Year Make Model Description
1999-2001Jeep Grand Cherokee Jeep Grand Cherokee V8 4.7L 20 Inch (weld to weld) Prop Shaft Length with CV Joint Style Drive Shaft Front Driveshaft
2002Jeep Grand Cherokee Jeep Grand Cherokee V8 4.7L 20 Inch (weld to weld) Prop Shaft Length with CV Joint Style Drive Shaft Front Driveshaft

Part Interchange

Brand Label Part Number
DIY Solutions ADS00256
Dorman - OE Solutions 938-143

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Brand #: DSA86532
Product Reviews
4.56/ 5.0
9 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Best price, works as described
My shop could only find one for about $100 more than this, and the one they found was used. Had this shipped right to the shop, no issues.
July 5, 2017
Great replacement
Perfect fit, well constructed and hundreds less than other sites.
July 10, 2017
Absolutely PERFECT!
Perfect fit, AWESOME cost, I would absolutely recommend this part over an oem or reman.
December 28, 2017
great product for the price
I will buy more parts as required , Shipped in great condition and works very well . Thank you A
February 1, 2018
Jeep drive shaft
Excellent part. Timely shipping. Good price. I would strongly recommend your company and will shop with you again for other needs.
June 5, 2018
Driveshaft and axleshafts
I’m very impressed with the parts getting to my door so fast the only issue I have is that the drive shaft wound up being about an inch and a half too short
November 28, 2019
Perfect fit.
Bought this front shaft that replaced the original. It fit perfect and works great. Yes, this is worth recommending
June 15, 2020
fast delivery!!
went online ordered my part boom it was here within a few days ill order from 1a auto again no questions.
June 25, 2020
Does not need balancing but does not seem to be good quality
I installed the driveshaft myself on my 2000 Jeep Grand Cherokee 4x4 4.7L V8 and thought it needed balancing but it was actually grease in the boot causing it to vibrate at speeds >65mph. I found this out the hard way because on the day of installation, the boot ripped while driving on the highway leaving a quarter-sized whole in the side of the boot. This threw grease all over my undercarriage but I was stratified in knowing that I not longer had a vibration until higher speeds (that I would not go anyway). However, recently (now about 2 months and <1,500 miles after installation) I was driving on the highway and the entire boot ripped apart and knocked an ABS sensor connector apart (no big deal since the connector just snapped back together but it was pretty scary for all of that to happen at 60-65mph). There could be underlying issues on my vehicle that would aid in the destruction of the boot but I cant think of anything that would cause that to happen. I will just be purchasing a new split/2-part boot to replace it since I do not want to pull the entire shaft out again. And it the shaft came with extra grease which will allow me to add some back to the bearings. It also does not come with the black sleeve like shown in the pictures. It is bear metal steel. Not a big problem for me personally since it SHOULD still outlast my vehicle but does seem like false advertisement.
August 6, 2020
Customer service


Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

Jeep is a registered trademark of FCA US LLC. 1A Auto is not affiliated with or sponsored by Jeep or FCA US LLC. See all trademarks.

Jeep Grand Cherokee Front Driveshaft-1ADSH00057 does not fit your:

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a 2000 Jeep Grand Cherokee with these options.