1ABFS02200-Jeep Grand Cherokee Front & Rear Ceramic Brake Pad & Rotor Kit

Replaces

Jeep Grand Cherokee Front & Rear Ceramic Brake Pad & Rotor Kit

1ABFS02200

Part Details

  • Brake Pad Friction Material: Ceramic
  • Brake Pad Bonding Type: Premium Posi
  • Kit Includes: (1) Front Ceramic Brake Pad Set
  • Kit Includes: (1) Rear Ceramic Brake Pad Set
  • Kit Includes: (2) Front Replacement Brake Rotors
  • Kit Includes: (2) Rear Replacement Brake Rotors
  • Rear Brake Rotor Venting Type: Solid
  • Rear Brake Rotor Diameter: 12.01 in. (305mm)
  • Front Brake Rotor Diameter: 12.01 in. (305mm)
  • Front Brake Rotor Venting Type: Vented
  • Wheel Lug Count: 5 Lug
  • Kit Includes: Brake Pad Contact Point Grease
  • Kit Includes: Brake Pad Hardware

This part replaces:

  • Reference Number CD791
  • Reference Number CD945
  • OE # 52098666
  • OE # 52008672
FREE SAME DAY SHIPPING
Save 22%
List: $204.95 Save: $45.00
Part 1ABFS02200
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: BKA11533
Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Part Details

  • Brake Pad Bonding Type:   Premium Posi
  • Wheel Lug Count:   5 Lug
  • Rear Brake Rotor Venting Type:   Solid
  • Brake Pad Friction Material:   Ceramic
  • Front Brake Rotor Diameter:   12.01 in. (305mm)
  • Rear Brake Rotor Diameter:   12.01 in. (305mm)
  • Front Brake Rotor Venting Type:   Vented
  • Kit Includes:
      (1) Front Ceramic Brake Pad Set
      (1) Rear Ceramic Brake Pad Set
      (2) Front Replacement Brake Rotors
      (2) Rear Replacement Brake Rotors
      Brake Pad Contact Point Grease
      Brake Pad Hardware

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quite braking
Positive Mold Technology

Improves durability and performance by allowing for even wear. Eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

Reduces noise and vibration

Environmentally Compliant

Meets the Better Brake Law standards

Thermal Scorched

Accelerates the break-in process and enhances stopping performance from the first stop.

100% CNC-Machined to Exact OE Specs

Balanced to reduce vibration.

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy.

Non-Directional Surface Finish

Helps ensure smoother, quieter, and more effective braking.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Wheel (1:19)
    • Loosen the lug nut covers with a 19mm socket
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (1:43)
    • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
    • Remove 1bolts from the brake caliper with an 11/16 socket
    • Pull the caliper aside
    • Pry out the pins from the brake pads
    • Pry the brake pads off with a flat blade screwdriver
    • Unclip the ABS sensor wiring harness
    • Remove 3/4 inch bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Remove the Phillips screws from the rotor
    • Pull the rotor off
    • If the rotor will not pull off, thread some bolts into the slot on the rotor, and tighten them to loosen the rotor
  3. step : Installing the New Brake Rotor and Brake Pads (5:48)
    • Clean off the hub with a wire brush
    • Slide the rotor on
    • Clean both sides of the rotor with brakes parts cleaner
    • Thread on one lug nut to hold the rotor in place
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Apply grease to the caliper slide bolts
    • Clean the caliper bracket and brake pad slides with a wire brush
    • Put the bracket back into place
    • Start the bolts by hand
    • Tighten the bolts to 85 foot-pounds of torque
    • Apply grease to the brake pad tabs
    • Install the new brake pads into the bracket
    • Put the caliper on
    • Thread bolts by hand
    • Secure the caliper slide pin with locking pliers
    • Tighten bolts to 20 foot-pounds
    • Remove the lug nut
  4. step : Reattaching the Wheel (10:53)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the 19mm lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
  5. step : Testing the Brakes (11:18)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Hammer
  • Jack Stands
  • Wire Brush
  • Floor Jack

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - SAE

  • 3/4 Inch Socket
  • 11/16 Inch Socket

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Does this kit come with calipers or not?
Tony F May 7, 2019
NO
S M May 7, 2019
Yes it does the kit was a good idea.
Ray B May 7, 2019
No
R O May 7, 2019
just rotors and pads
C H May 7, 2019
no
M W May 7, 2019
This kit does not include calipers. It does include all pads and rotors for the front and rear.
Andra M May 7, 2019
No
C H May 7, 2019
No
Michael Ryan D May 8, 2019

Fits the following Makes:

Year Make Model Description
1999-2002Jeep Grand Cherokee Jeep Grand Cherokee with Akebono Calipers Front & Rear Ceramic Brake Pad & Rotor Kit
2003-2004Jeep Grand Cherokee Jeep Grand Cherokee Front & Rear Ceramic Brake Pad & Rotor Kit

Part Interchange

Brand Label Part Number
Aimco 5119
Aimco 5118
Bendix PRT5253
Bendix PRT5254
DuraGo BR5119
DuraGo BR5118
Raybestos EHT791H
Raybestos EHT945H
Raybestos Brakes EHT945H
Raybestos Brakes EHT791H
Raybestos Brakes 76793
Raybestos Brakes 76794
Wagner BD125693
Wagner BD125673

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
TRQ
Brand #: BKA11533
Product Reviews
4.75/ 5.0
4 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
1
0
0
0
Easy Install
We got the parts ordered ahead of schedule. Parts were easy to install and the right fit. Thanks again for quality parts.
July 1, 2017
i got this for my 99 grand cherokee, however, the center is not painted so, if you dont want it to rust. you should paint it first before installing. 2 k miles so far so good.
March 31, 2018
Great parts, got here rather quick.
June 28, 2020
Brake Kit
Product was exactly what I was expecting
August 27, 2020
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


Jeep Grand Cherokee Front & Rear Ceramic Brake Pad & Rotor Kit-1ABFS02200 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.