This Ignition Kit comes with NGK Laser Platinum Spark Plugs and TRQ Ignition Coils.
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Ignition Coils 2007-12 Dodge Caliber
How to Replace Ignition Coils and Spark Plugs 2011-14 Chrysler 200
How to Replace Ignition Coils 2007-2017 Jeep Compass 24L L4
How to Replace Ignition Coils 2007-2017 Jeep Compass 24L L4
How to Replace Ignition Coils and Spark Plugs 2011-14 Chrysler 200
Created on:
Tools used
T30 Driver
1. Removing the Ignition Coil
Disconnect the ignition coil wiring harness by hand
Remove the T30 bolt from the ignition coil
Pull the ignition coil up and out
2. Installing the New ignition Coil
Place the ignition coil into place
Insert the T30 bolt into the ignition coil
Connect the ignition coil wiring harness
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace an ignition coil on this 2008 Dodge Caliber with the 2L engine. It's the same part and process on every year of the Caliber with this engine. The only tools you'll need include a new ignition coil from 1AAuto.com and a T30 Torx bit and ratchet or T30 Torx Driver.
Your four ignition coils are right here. You want to start off by disconnecting this harness. Just push down on the tab and pull it free. Next, remove this T30 bolt and then the ignition coil will pull off the mount.
On the left is the old ignition coil; on the right is the new one from 1A Auto. You can see that they're identical and will mount exactly the same. Put the new ignition coil down into place, replace that T30 Torx's bolt, and tighten it up. Then reconnect your harness, repeat for the other three, and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
Dielectric Grease
Torque Wrench
Socket Extensions
8mm Socket
7mm Socket
10mm Socket
5/8 Inch Spark Plug Socket
T30 Socket
Ratchet
Trim Tool Set
Tools used
1/4 Inch Ratchet
Torque Wrench
Gloves
T27 Torx Driver
3/8 Inch Drive Ratchet
Safety Glasses
Tools used
1/4 Inch Ratchet
Torque Wrench
Gloves
T27 Torx Driver
3/8 Inch Drive Ratchet
Safety Glasses
Tools used
Dielectric Grease
Torque Wrench
Socket Extensions
8mm Socket
7mm Socket
10mm Socket
5/8 Inch Spark Plug Socket
T30 Socket
Ratchet
Trim Tool Set
IGN01148
In Stock
Product Reviews
Loading reviews
5.00/ 5.03
3 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
0
0
0
0
Worked as needed
Nicholas
February 24, 2021
The new coil packs and spark plugs seemed to be made of pretty high quality and so far have worked well and as needed. Both codes for cylinder 1 and cylinder 2 have cleared.
Dodge caliber
Rich
May 12, 2021
Ignition coil and spark plugs were easy assembly and increased gas mileage
Great product service and price
Chad
July 21, 2021
Worked perfectly and saved a ton of money
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.