Specifications:

  • High quality 409 grade stainless steel
  • EPA Certified
  • Direct fit
  • Built to strict quality control standards
  • Dimensions:
    • Inlet O.D.: 2 1/2 inches
    • Outlet O.D.: 2 1/4 inches
    • Overall Length: 21.75 inches
    • # of Threaded Oxygen Sensor Ports: 1


 

 

5 Year Warranty

This item is backed by a 5 Year Warranty. In the event this item should fail during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. 

Emissions Note:

Due to state emissions regulations, we cannot ship this item to the state of California as it is not C.A.R.B ( California Air Research Board) approved for use in this state.

Due to New York state emissions regulations, this item cannot be installed on a California emissions equipped vehicle in the state of New York.

All emissions information for a vehicle can be found on a tag under the hood. If the tag is missing, you can contact a dealership with your VIN to determine which emissions system your vehicle is equipped with.

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
Does it have to be welded on or no?
Edwina H on Jul 11, 2018
BEST ANSWER: This part does not need to be welded on.

Vehicle Fit

Year Make Model Description
1996-1998Jeep Cherokee Jeep Cherokee Catalytic Converter L6 4.0L with 2-1/2" Inlet
1996-2000Jeep Cherokee Jeep Cherokee Catalytic Converter L4 2.5L with 2-1/2" Inlet
1996-1998Jeep Grand Cherokee Jeep Grand Cherokee Catalytic Converter V8 5.2L
1996-1998Jeep Grand Cherokee Jeep Grand Cherokee Catalytic Converter L6 4.0L with 2-1/2" Inlet
1998Jeep Grand Cherokee Jeep Grand Cherokee Catalytic Converter V8 5.9L
1997-2000Jeep Wrangler Jeep Wrangler Catalytic Converter L4 2.5L
Part #: 1ACCD00034

Out of Stock