This front wheel bearing/hub assembly, brake rotor, & brake pad set is just what you need to get your vehicle in good stopping order again!

Brake Pad Specifications:

  • 4 Piece FRONT Brake Pad Set
  • No core charge
  • Includes shims
  • Professional Grade Ceramic Enhanced Disc Brake Pads

Brake Rotor Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Fit 5 Stud Wheels
  • 11.02" Diameter

Wheel Bearing & Hub Assembly Specifications:

  • Comes as a PAIR
    • Fits both the RH (Passenger Side) & LH (Driver Side) FRONT
  • 3 Bolt Flanges
  • Fits 5 Lug Wheels
  • Studs already installed
  • Direct replacements

This wheel bearing/hub assembly, brake rotor, & brake pad set makes great replacements and has good value over the price of dealer parts.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:51)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Straighten the cotter pin on the axle nut with needle nose pliers
    • Remove the cap and washer from the axle nut
    • Loosen the axle nut with a 36mm socket and breaker bar
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Rotor (2:18)
    • Remove 13mm bolts from the brake caliper
    • Pull the caliper aside and secure it out of the way with a bungee chord
    • Pull the rotor off
  3. step : Removing the Hub (3:10)
    • Spray rust penetrant around the contact points of the hub
    • Remove the three 13mm 12-point bolts from the hub
    • Pry off the washer from the axle (if you have one) with a pick
    • Tap the axle in with a hammer to free the splines from the hub
    • Tap the hub out of the spindle with a hammer
    • Remove the hub and dust shield
  4. step : Installing the Hub (5:55)
    • Insert the dust shield into place
    • Insert the hub into place
    • Tighten the 12-point 13mm bolts
    • Torque the hub bolts to 75 foot-pounds
  5. step : Installing the Rotor (6:49)
    • Insert the rotor onto the hub
    • Press the caliper onto the rotor
    • Tighten the two 13mm bolts to the caliper
    • Torque the caliper mounting bolts to 20 foot-pounds
  6. step : Reattaching the Wheel (7:28)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to between 110 foot-pounds in a crossing or star pattern
    • Torque the axle nut to 175 foot-pounds
    • Insert the axle nut cap into place
    • Insert a new cotter pin into place
    • Turn each end of the cotter pin to opposite sides of the nut

Tools needed for replacement:

    General Tools

  • Hammer
  • Pick

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Bungee Cord

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 19mm Socket
  • 13mm Socket
  • 36mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
Quality parts
This is my first time using 1A Auto. The low prices is what attracted me to placing my order. The parts arrived, with free shipping, in a timely manner. All new part, not re-manufactured, with a top brand name. I will use them again!
July 12, 2017
Purchased
8 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 3 answers
What brand of hub is included in this kit?
Casey C on Oct 28, 2017
BEST ANSWER: We have a few different aftermarket companies build these parts specifically for us, as our 1A Auto house brand. They are manufactured to the same OEM specifications as the original part that came with your vehicle. If you have any further questions, please don't hesitate to ask.

How-to Video:

(08:55 min)

Tools List:

    General Tools

  • Hammer
  • Pick

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Bungee Cord

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 19mm Socket
  • 13mm Socket
  • 36mm Socket



This part replaces:

  • OE # 52005000
  • OE # 52007710
  • OE # 5015965AA
  • OE # 52008440
  • OE # 52008264
  • OE # 53007449AB
  • OE # 53007449

Vehicle Fit

  • 1990-1993 Jeep Cherokee 4 Wheel Drive Front Brake & Wheel Bearing Kit Ceramic
  • 1994-1998 Jeep Cherokee Front Brake & Wheel Bearing Kit Ceramic
  • 1990-1992 Jeep Comanche (MJ) 4 Wheel Drive Front Brake & Wheel Bearing Kit Ceramic
  • 1993-1998 Jeep Grand Cherokee Front Brake & Wheel Bearing Kit Ceramic
  • 1990 Jeep Wagoneer 4 Wheel Drive Front Brake & Wheel Bearing Kit Ceramic
  • 1990-1995 Jeep Wrangler Front Brake & Wheel Bearing Kit Ceramic
  • 1997-1998 Jeep Wrangler Front Brake & Wheel Bearing Kit for Models with 3.25" Tall Rotors Ceramic
Part #: 1ABMS00039

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More