Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Quantity:   Pair

These replacement interior door handles are just what you need to get your vehicle in good working order again!


  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Injection molded plastic with textured handles
  • Steel center rods and return springs
  • Include lock buttons
  • Direct replacements

These inside door handles are direct replacements and built to strict quality control standards. They are great replacements and have good cost savings over dealer units.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm -

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the door panel (1:20)
    • Remove the window crank with your removal tool.
    • Remove the Phillips screw behind the door handle.
    • Take the door handle bezel and set it aside.
    • Unscrew the two Phillips screws behind the door pull.
    • Pry the door panel off with your putty knife.
    • Disconnect the wiring harness connections.
  2. step : Remove the interior door handle (2:22)
    • Unclip the door lock rod.
    • Use a hammer and a flat blade screwdriver to pry off the door handle bracket.
    • The door handle will slide off towards the end of the door, away from the body of the vehicle.
    • Disconnect the door handle latch rod.
  3. step : install the new interior door handle (4:30)
    • Connect the door latch rod.
    • Clip the door handle into the door.
    • Double check the latch and lock rod clips behind the water shield to make sure they didn’t get unclipped.
  4. step : Replace the door panel (6:02)
    • Connect any wiring harness connections.
    • Pin the door panel to the door.
    • Replace the door handle bezel.
    • Secure the three Phillips screws.
    • Install the window crank if you have it.

Tools needed for replacement:

    General Tools

  • Putty Knife

  • Materials, Fluids, and Supplies

  • Paper Clip

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Socket Driver

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 7mm Socket

  • Specialty Tools

  • Door Panel Removal Tool
  • Window Crank Removal Tool

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1998-2005Chevy Blazer S10 Chevy Blazer S10 Interior Door Handle Front Pair
1999-2004Chevy S10 Pickup Chevy S10 Pickup Interior Door Handle Front Pair
1998-2001GMC Jimmy S-15 GMC Jimmy S-15 Interior Door Handle Front Pair
1999-2004GMC S-15 Sonoma GMC S-15 Sonoma Interior Door Handle Front Pair
1998-2000Isuzu Hombre Isuzu Hombre Interior Door Handle Front Pair
1998-2004Oldsmobile Bravada Olds Bravada Interior Door Handle Front Pair
Only 4 left in stock
Part #: 1ADHS00126

Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(07:21 min)