Wear and Tear

This item is backed by a 60-day warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Air Intake Hose (0:48)
    • Remove the 8mm bolt holding the engine cover
    • Loosen the air intake hose clamps with a flat blade screwdriver
    • Unclip the intake hose from the radiator hose
    • Pull the intake hose up and out
  2. step : Disconnecting the Intake Manifold (1:30)
    • Remove the 8mm bolts
    • Disconnect the harnesses by pulling up on the tab
    • Pry the vacuum hose free
    • Remove the 10mm nuts from the throttle body
    • Lift up the bracket and pull it aside
    • Remove the 8mm bolt and the pull the bracket aside
    • Disconnect the two hose plants and harnesses
    • Remove the 10mm nut and pull the set of harnesses aside
  3. step : Disconnecting the Fuel Line (3:47)
    • Disconnect the eight harnesses to the fuel injector by pulling up on the tab
    • Loosen the fuel line cap
    • Covering the fuel line with a rag, push the tab on the fuel bleeder with a flat head screwdriver
    • Replace the cap
    • Remove the clip
    • Push the fuel line separator tool all the way in and pull the fuel line free
    • Clamp the vacuum hose clamp with pliers and pull it free
  4. step : Removing the Intake Manifold (5:26)
    • Remove the series of 10mm bolts
    • Maneuver the intake manifold past harnesses and wires and move it as far as possible
    • Feed the EGR out through the harnesses
    • Lift the intake manifold up and out
  5. step : Removing the Engine Knock Sensors (7:24)
    • Pry up the knock sensor harness caps
    • Push in the sides of the harness with bent needle nose pliers and pull up
    • Remove the knock sensors with a 22mm socket
  6. step : Installing the Engine Knock Sensors (8:03)
    • Feed the knock sensor into place and tighten it with a 22mm socket
    • Push the harness back onto the knock sensor
    • Replace the cap
  7. step : Reinstalling the Intake Manifold (9:06)
    • Set the intake manifold down and pull the vacuum hose out through the other side
    • Disconnect the EGR by pulling out on the clip with a flat blade screw driver
    • Feed the hose through the side of the intake manifold
    • Maneuver the intake manifold down and into place
  8. step : Reconnecting the Fuel Line (10:14)
    • Reconnect the fuel lines
    • Replace the clips to lock the lines
    • Slide the hose clamp back into place using pliers
    • Line up the throttle body and reconnect it by pushing it up on the studs
    • Push the EGR valve back into place, replace the bolt, and reconnect the hose
    • Reconnect the vacuum hose into the throttle body
  9. step : Reconnecting the Intake Manifold (12:24)
    • Replace the 10mm bolts
    • Replace the bracket near the back
    • Torque the manifold bolts with a torque wrench
    • Start in the middle and work in a counter-clockwise pattern
    • Tighten them on the first pass to 44 inch pounds, then 89 inch pounds
    • Push the harness in and push the clip into place to reconnect the fuel injectors
  10. step : Reinstalling the Air Intake Hose (14:54)
    • Push the intake hose into place
    • Tighten the intake hose clamps with a flat blade screwdriver
    • Double check all the harnesses and hoses
    • Replace the engine cover with an 8mm bolt

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Bent Nose Pliers

  • Ratchets & Related

  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 22mm Socket
  • 8mm Socket

  • Specialty Tools

  • Fuel Line Disconnect Tool

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(15:52 min)

Tools List:

    Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Bent Nose Pliers

  • Ratchets & Related

  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 22mm Socket
  • 8mm Socket

  • Specialty Tools

  • Fuel Line Disconnect Tool



This part replaces:

  • Reference Number MS92211

Vehicle Fit

  • 2002-2003 Cadillac Escalade Intake Manifold Gasket Set V8 5.3L
  • 2002-2003 Cadillac Escalade Intake Manifold Gasket Set V8 6.0L
  • 2003 Cadillac Escalade ESV Intake Manifold Gasket Set V8 6.0L
  • 2002-2003 Cadillac Escalade EXT Intake Manifold Gasket Set V8 6.0L
  • 2002-2003 Chevy Avalanche 1500 Intake Manifold Gasket Set V8 5.3L
  • 2003 Chevy Express 1500 Van Intake Manifold Gasket Set V8 5.3L
  • 2003 Chevy Express 2500 Van Intake Manifold Gasket Set V8 6.0L
  • 2003 Chevy Express 2500 Van Intake Manifold Gasket Set V8 5.3L
  • 2003 Chevy Express 2500 Van Intake Manifold Gasket Set V8 4.8L
  • 2003 Chevy Express 3500 Van Intake Manifold Gasket Set V8 6.0L
  • 2003 Chevy SSR Intake Manifold Gasket Set V8 5.3L
  • 1999-2000 Chevy Silverado 1500 Intake Manifold Gasket Set V8 5.3L
  • 1999-2003 Chevy Silverado 1500 Intake Manifold Gasket Set V8 4.8L
  • 1999-2003 Chevy Silverado 1500 Intake Manifold Gasket Set V8 5.3L
  • 2003 Chevy Silverado 1500 SS Intake Manifold Gasket Set V8 6.0L
  • 2001-2003 Chevy Silverado 1500 HD Intake Manifold Gasket Set V8 6.0L
  • 1999-2000 Chevy Silverado 2500 Intake Manifold Gasket Set V8 5.3L
  • 1999-2003 Chevy Silverado 2500 Intake Manifold Gasket Set V8 6.0L
  • 2001-2003 Chevy Silverado 2500 HD Intake Manifold Gasket Set V8 6.0L
  • 2001-2003 Chevy Silverado 3500 Intake Manifold Gasket Set V8 6.0L
  • 2000-2003 Chevy Suburban 1500 Intake Manifold Gasket Set V8 5.3L
  • 2000-2003 Chevy Suburban 2500 Intake Manifold Gasket Set V8 6.0L
  • 2000-2003 Chevy Tahoe Intake Manifold Gasket Set V8 5.3L
  • 2000-2003 Chevy Tahoe Intake Manifold Gasket Set V8 4.8L
  • 2003 Chevy Trailblazer EXT Intake Manifold Gasket Set V8 5.3L
  • 2003 GMC Envoy XL Intake Manifold Gasket Set V8 5.3L
  • 2003 GMC Savana 1500 Van Intake Manifold Gasket Set V8 5.3L
  • 2003 GMC Savana 2500 Van Intake Manifold Gasket Set V8 6.0L
  • 2003 GMC Savana 2500 Van Intake Manifold Gasket Set V8 4.8L
  • 2003 GMC Savana 2500 Van Intake Manifold Gasket Set V8 5.3L
  • 2003 GMC Savana 3500 Van Intake Manifold Gasket Set V8 6.0L
  • 1999-2003 GMC Sierra 1500 Intake Manifold Gasket Set V8 4.8L
  • 1999-2003 GMC Sierra 1500 Intake Manifold Gasket Set V8 5.3L
  • 2001-2003 GMC Sierra 1500 HD Intake Manifold Gasket Set V8 6.0L
  • 1999-2003 GMC Sierra 2500 Intake Manifold Gasket Set V8 6.0L
  • 1999-2000 GMC Sierra 2500 Intake Manifold Gasket Set V8 5.3L
  • 2001-2003 GMC Sierra 2500 HD Intake Manifold Gasket Set V8 6.0L
  • 2001-2003 GMC Sierra 3500 Intake Manifold Gasket Set V8 6.0L
  • 2000-2003 GMC Yukon Intake Manifold Gasket Set V8 5.3L
  • 2000-2003 GMC Yukon Intake Manifold Gasket Set V8 4.8L
  • 2000-2003 GMC Yukon XL 1500 Intake Manifold Gasket Set V8 5.3L
  • 2000-2003 GMC Yukon XL 2500 Intake Manifold Gasket Set V8 6.0L
  • 2003 Hummer H2 Intake Manifold Gasket Set V8 6.0L
  • 2003 Isuzu Ascender Intake Manifold Gasket Set V8 5.3L
Part #: 1AEGS00327

Out of Stock

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More