Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

This replacement ignition wire set is just what you need to get your vehicle in good running order again!

Specifications:

  • Ignition Wire Set of 6
    • Correct length and boot configuration
  • High Grade Silicone Outer Jacket
  • Heavy Duty Silicone Boots
  • Zinc Coated Snap Lock Terminals
  • Replaces dealer part numbers: 12192189, 12192470

This ignition wire set is a great replacement and has good cost savings over a dealer set.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

    If your engine has no cylinder markings, replace one wire at a time

  1. step : Removing the Spark Plugs (0:27)
    • Notice the marking of each spark plug
    • The left head, or front of the car, is 1, 3, 5
    • The back of the car is 2, 4, 6
    • Remove the plug from the 1st coil and the 1st spot on the engine
    • Repeat the process for cylinder 3 and 5
    • Pry off the clips holding the 2, 4, and 6 plugs with a flat blade screwdriver
    • Remove the spark plugs for 2, 4, and 6
  2. step : Installing the Spark Plugs (2:06)
    • Plug the shortest wire into the 1st spark plug and cylinder head
    • Plug the second shortest wire into the 3rd spark plug and cylinder head
    • Plug the next shortest wire into the 5th spark plug and cylinder head
    • Press the wires into the channel on the left head
    • Swap over the head shields from the old wires to the new ones
    • Repeat the process for plugs 2,4, and 6
    • Replace the two clips holding the wires

Tools needed for replacement:

    General Tools

  • Pick

  • Screwdrivers & Related

  • Flat Blade Screwdriver

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1999-2005Buick LeSabre Buick LeSabre Ignition Wire Set V6 3.8L (8th Vin Digit K)
2006Buick Lucerne Buick Lucerne Ignition Wire Set V6 3.8L
1999-2005Buick Park Avenue Buick Park Avenue Ignition Wire Set V6 3.8L (8th Vin Digit K)
1999Oldsmobile Delta 88 Olds Delta 88 Ignition Wire Set V6 3.8L (8th Vin Digit K)
1999Oldsmobile LSS Olds LSS Ignition Wire Set V6 3.8L (8th Vin Digit K)
1999-2005Pontiac Bonneville Pontiac Bonneville Ignition Wire Set V6 3.8L (8th Vin Digit K)
Part #: 1AESW00040

Out of Stock

How-to Video:

(04:18 min)