The ignition coil is a crucial part of your ignition system. It's function is to convert the 12 volt power of your vehicle's electrical system in to 35,000 or more volts. This produces a high intensity spark at the spark plug which then ignites the fuel in the cylinder. Coils in general will wear out over time. This will cause a misfire condition. In engines like this with one coil per cylinder you can diagnose a coil by putting a timing light on each one to make sure it is lighting the light consistently.

Specifications:

  • Brand New
  • Replaces dealer part numbers: 6218283, 30520P8EA01, 30520-P8E-A01, 30520P8FA01, 30520-P8F-A01, 30520P8FA02, 30520-P8F-A02
  • Built to strict quality control standards
  • Direct replacement
  • 100% factory tested
  • Fits 6 cylinder engines only

This coil is a coil over plug distributorless application. Sold as Each, six are required per car, replace individually as needed.

 

Returns Note:

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed.

Direct Fit Replacement

Guaranteed to fit and function properly for your specific application.

Optimum Performance

Meets or exceeds requirements of the vehicle. Provides the correct primary and secondary resistance, voltage output, and spark energy needed to restore original operating condition.

Premium Quality

Manufactured with quality materials to meet highest quality control standards in the industry.

Part Details

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Engine Covers (0:53)
    • Remove the four 10mm bolts from the upper engine cover
    • Lift off the upper engine cover
    • Loosen the two plastic clips on the lower engine cover with a flat blade screwdriver
    • Lift off the lower engine cover
  2. step : Removing the Ignition Coil (1:45)
    • Disconnect the ignition coil wiring harness
    • Remove the T40 Torx bolt from the ignition coil
    • Pull the ignition coil up and out
  3. step : Installing the Ignition Coil (2:55)
    • Push the ignition coil into place
    • Insert the T40 Torx bolt into the ignition coil
    • Connect the ignition coil wiring harness
    • Repeat Steps 2 through 3 for the remaining coils
  4. step : Installing the Engine Covers (3:51)
    • Push on the lower engine cover
    • Tighten the lower engine cover clips with a flat blade screwdriver
    • Push on the upper engine cover
    • Insert the four 10mm bolts into the upper engine cover

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Torx Drivers & Sockets

  • T40 Torx Bit

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2001-2003Acura CL Acura CL Ignition Coil
2005-2008Acura RL Acura RL Ignition Coil
2000-2008Acura TL Acura TL Ignition Coil
2000-2007Honda Accord Honda Accord Ignition Coil V6 3.0L
1999-2007Honda Odyssey Honda Odyssey Ignition Coil
2008-2010Honda Odyssey Honda Odyssey (excluding EX-L Models) (excluding Touring Models) Ignition Coil

This part replaces:

  • OE # 30520P8EA01
  • Hollander 610-58547B
  • Standard Motor Products UF242T
Part #: 1AECI00048


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(04:59 min)