Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Item Condition:New
Attention California Customers:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How To Replace Ignition Coils 2000-05 Toyota Celica
How to Replace Ignition Coils 2002-11 Toyota Camry
Created on:
Tools used
Flat Blade Screwdriver
10mm Socket
Ratchet
1. Removing the Ignition Coil
Make sure you have the correct ignition coil for your engine
Disconnect the ignition coil wiring harness with a flat blade screwdriver
Remove the 10mm bolt from the ignition coil
Pull the ignition coil up and out
2. Installing the New Ignition Coil
Put the new ignition coil into place
Insert the 10mm bolt into the ignition coil
Connect the ignition coil wiring harness
Repeat Steps 1 and 2 for the remaining ignition coils
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we show you how to replace the ignition coil on this 2000 Toyota Celica. It's the same process on the Celicas from 2000 to 2005. There are two types of ignition coils for this vehicle, so make sure you check your engine number and compare it to the engine number given with the part on 1AAuto.com. The only tools that you're going to need for this are a 10mm socket and a ratchet.
Right here are your four ignition coils. You're going to start off. You just pry up the tab and pull the harness right off. Then you just remove the 10mm bolt right here and then the ignition coil just pulls right up and out.
Reinstallation is straightforward, put the coil back in, line up the hole, reinsert the 10mm bolt and tighten it up nice and firm, reconnect the harness, and then repeat that for the other three coils.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
Socket Extensions
Flat Blade Screwdriver
10mm Socket
Ratchet
1. Disconnecting the Battery
Disconnect the negative terminal with a 10mm socket
2. Removing the Ignition Coils
Remove the two 10mm nuts from the engine cover
Remove the engine cover
Disconnect the ignition coil wiring harness
Remove the 10mm bolt from the ignition coil
Remove the ignition coil
3. Installing the Ignition Coils
Insert the ignition coil into place
Tighten the 10mm bolt to the ignition coil
Connect the wiring harness
Reinstall the engine cover
Tighten the two 10mm bolts to the cover
4. Connecting the Battery
Connect the negative terminal with a 10mm socket
Hi, I’m Mike from 1A Auto. We’ve been selling auto parts for over 30 years!
Disconnect the negative battery terminal, it's a 10 millimeter nut.
Remove the plastic engine cover, two 10 millimeter nuts on the top. Cover should just slip off, let me put that aside. These are your four ignition coil packs, right on top of the engine. To remove them, well this tab is broken, but if the tab is not broken you push the tab in, pull it out. Push the lock in and pull it off.
To remove the coil pack, loosen the 10 millimeter bolt that's holding it into the head. This procedure's the same for the other three coils. Pull it straight up, and it'll come right off the spark plug. Repeat the procedure for the other three coils.
Install the new coil, and put it down over the spark plug. Until that gets tight, I'm just going to stop. Reconnect the modular connectors. Reinstall the plastic engine cover. The spark plugs and coils have been changed.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
IGN00665
In Stock
Product Reviews
Loading reviews
4.88/ 5.08
8 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
7
1
0
0
0
Nice
Laurette
May 11, 2020
Excellent item works great easy to install, thanks for fast shipping.
Excellent
P
July 30, 2020
Just what I need! Shipping was fast too
ignition coil wires
marcos
October 7, 2020
they were great!, arrived just on time on my day off, and i was all hands on .the two days free delivery works great for me.
LOVE 1A AUTO
WILLIAM
June 17, 2021
Great product and service
PATRICK
December 28, 2021
The ignition coil wire harness was way overdue for change in my 2006
Toyota Camry. I had a bit of a hard time figuring out how I was going to have it installed......but aside from that after installation it worked like a charm.
Thank you.
Gregory
December 18, 2022
Would have been nice if it would have matched the color code on the original harness still work great
Albert
January 19, 2023
Bien el producto lo malo fue q se tardó demasiado para llegar
Good replacement
jamie
February 17, 2023
Super easy to install. Pulled out the pigtail wiring that came with it and installed these on my vehicle with the original harness.
Customer Q&A
Is this fit for my toyota rav 4 2008, 4 cylinder, 2 wheel drive?February 26, 2021
Abe P
10
As long as your Rav 4 has this engine ID.
2004-2008ToyotaRav4Toyota Rav4 L4 2.4L (Engine ID 2AZFE) Ignition Coil Wire Harness 4 Piece Set
February 27, 2021
Corey M
Are there any instructions for installing this wire harness set? I see there are instructions for replacing coils, but but I already know how to do that.May 18, 2022
B T
10
We don't currently have an installation video or instructions available for this part. We're constantly adding new installation videos and instructions though, so please check again at a later time or check our Video Library to see similar repairs here: https://www.1aauto.com/videos
May 18, 2022
T I
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET